Page 252 - CATALOG

CABLE RAILING

SWAGED TENSIONING FITTINGS FOR WOOD POSTS

The most
common option
The Invisiware® Stud is swaged onto the end of the
Invisiware® Receiver cable and used with the Invisiware® Receiver.
with Invisiware®Stud

Adjust-A-Body®
with Hanger Bolt CABLE ITEM THREAD "L" "D" DIAMETER
DIA. NO. AFTER SWAGED
1/8" S-4 5/16-24 1.180" .250"
3/16" S-6 5/16-24 1.140" .250"

Adjust-A-Jaw® The Invisiware® Receiver w/Invisiware® Stud fitting
and Lag Eye is placed and concealed within a pre-drilled hole in the
wood end post (a minimum of 3" of clearance must exist
on the back side of the post). It is recommended that a
stainless steel flat washer be placed between the fitting
shoulder and the mating surface of the wood post. The
stud is swaged onto one end of the cable and is inserted
Adjust-A-Body® with and threaded into the Receiver installed in the end post.
STAINLESS & CABLE RAILING CABLE R-6-62
Threaded Eye and Lag Eye
ITEM
DIA.
NO.
1/8"
Adjust-A-Body® w/Hanger Bolt. The lag thread of the 3/16" R-6-62
hanger bolt portion of the fitting is driven into a pre-
drilled hole in the wood end post. The cable is retained
within the body portion of the fitting by a ferrule Adjust-A-Jaw® and Lag Eye fitting attaches to the end
swaged onto the end of the cable. The lock nut is post by installing a Threaded Tab into a pre-drilled and
installed all the way onto the hanger bolt first, followed tapped hole in the end post and attaching the threaded
by the body, which is secured onto the hanger bolt, jaw portion of the fitting to the threaded tab with a
creating tension on the cable. Once sufficient tension is button head screw.
achieved, the lock nut is secured against the end of the
body to prevent the fitting from loosening.

CABLE ITEM USE WITH USE WITH USE WITH
DIA. NO. FERRULE SCREW LAG EYE
CABLE ITEM USE WITH
DIA. NO. FERRULE 1/8" A-J62 F-4 SC-6 LE-6
1/8" A-JB6 F-4 3/16" A-J62 F-6 SC-6 LE-6
3/16" A-JB6 F-6

Adjust-A-Body® w/Threaded
Eye and Lag Eye fitting
attaches to the wood end post
by installing a Lag Eye into a
pre-drilled hole in the end post
and attaching the threaded eye CABLE ITEM USE WITH USE WITH USE WITH
portion of the fitting to he lag DIA. NO. FERRULE SCREW LAG EYE
eye with a button head screw. 1/8" A-JTE6 F-4 SC-6 LE-6
3/16" A-JTE6 F-6 SC-6 LE-6
Some fittings also available for
1/4", 5/16" and 3/8" dia. cable.

T: 908.757.2323 ✛ F: 908.757.3439
250 AISALES@ARCHIRONDESIGN.COM ✛ ARCHIRONDESIGN.COM