Page 447 - CATALOG

RANGER TELESCOPING SLIDING GATE ACCESSORIES

GROUND TRACK - CONNECTOR PIN - BRUSHES 289G-19.68FT
RG-30P 12.57mm 289G-9.84FT
Galvanized rack track Galvanized half round track
6'6" sections 1⅝" ¾"
Movement is generated ½"
by the ground mounted ⅝"
rack that also functions 2⅛"
as a track. 3⅛" ⅛"
1¼" ⅝" 1¼"
6'6"
¹¹/₁₆" ⅝" ⅜" 291 RG-15
⅛" 5mm Cleaning Brush,
Connection Pin 2 per gate.
The rack track is equipped with two side guides on which To be used with
the drive and free wheel sits. This is to ensure that the weight Rack Track
of the gate is not loaded on the rack and/or pinion teeth.
(RG-30P)
UPPER GUIDES FOR 1ST LEAF 256-220
8⅝"
255-220-C - For 1¼" - 2⅜" frames For up to - 3⅛" frames
2¹⁵/₁₆" 1⁹/₁₆" 8⅝" 6⅞"

1½" 1¼" ⅛" 5⁵/₁₆" - 6⅞"
1" - 2⁷/₁₆" 2¾" 1⁹/₁₆"
4⁵/₁₆"
UPPER GUIDES FOR 2ND & 3RD LEAVES Ø 13mm ⁵/₃₂"
RG-387-19.68FT 1⅜" 3¹¹/₃₂"
Galvanized 1¼" U-Channel, 19'8" 6½" 1¼" 0 - 3⅛" 1¾"
RG-387-9.84FT Comunello recommends this
Galvanized 1¼" U-Channel, 9'10" 1¼" 1⅜" RG-254 guide for added stability
CG-237-20FT Guide plate with changing wind
Aluminum 1½" U-Channel, 20' for use with speeds and smoother
rolling gates.
CG-237-10FT U-Channel
Aluminum 1½" U-Channel, 10' ¹/₁₆"
2⁹/₁₆" 3⅛" 2⁹/₁₆" 2⅝" 6⁹/₁₆" 2⅝"
RG-252 ³/₁₆" 1¼" Ø ⁷/₁₆" ³/₁₆" 1¼" Ø
Guide plate 1" 1"
for use with 2⅜" 2⅜" 1" ⅜"
U-Channel 1" ⅜"
⁷/₁₆"
8¼" 2⁹/₁₆" - 1¾" 11¹³/₁₆" 2⁹/₁₆" - 1¾"

2¼" 2¼"

RECEIVER BRACKETS
CG-15M CG-30M Top cup gate receiver
Adjustable Gate receiver, w/shock absorber
mounting bracket 2" - 3" frame 199-50 - 2" ID
199-60 - 2⅜" ID

GATE STOPS ADAPTER SLIDING GATE SYSTEMS

202 202F-A CG-58
Runaway stop Damped runaway Drive Shaft Coupling. Use when
Mounted via screws stop. Mounted via connecting a gate operator to the
screws. principal drive wheel.

T: 908.757.2323 ✛ F: 908.757.3439
SALES@LOCKS4GATES.COM ✛ LOCKS4GATES.COM 445