Page 339 - CATALOG

CLEAR GUARD & SMART COAT

A protective Clear Sealer would be used to protect material from the environment or to set a finish. Iron, steel
and aluminum need a protective coating to keep from oxidizing or rusting. A polished surface on bronze, brass,
or copper will tarnish without protection. After achieving a patina or color on your material, the protective
coating will help it last longer and help to keep it from changing. We suggest applying a clear coating in almost
every instance. The best way to apply any brand of clear sealer is to spray it on. Spraying reduces bubbles and
ridges formed by the brush, which help to break down the product faster. Small propellant applicators are
available, made by Badger or Crown, if you do not have a compressor. Two or three light coats are preferable
to one heavy coat, letting each dry before applying the next. No protective sealer will last forever. A regular
maintenance program is needed and should be scheduled according to the individual conditions. Wax may be
applied over the clear sealer to add even more protection.

Clear Guard (indoor use)
CGD08ZLQS
Clear Guard is a clear, durable, air drying lacquer that 8 oz. Clear Guard Satin
results in a hard, fast drying, and tarnish resistant film. It CGD12ZLQS
has excellent adhesion to bronze, brass, copper, and other 12 oz. Aerosol Spray Satin
metals as well as to patinas and rusted metal. Clear Guard CGD32ZLQS
32 oz. Clear Guard Satin
is suitable for use with all types of application equipment CGD01GLQS
including sprayers. Because of its unique chemistry, orange 1 gallon Clear Guard Satin
peel is virtually non-existent. Clear Guard is UV stable and
highly resistant to weather, water, and chemical damage.
It also resists marring and perspiration better than most CGD08ZLQM
8 oz. Clear Guard Matte
solvent lacquers. CGD12ZLQM
12 oz. Aerosol Spray Matte
Handling/Mixing: CGD32ZLQM
Loosen lid carefully. Container may be under slight 32 oz. Clear Guard Matte
pressure. Mix thoroughly before use. Use Sculpt Nouveau’s CGD01GLQM
Solvent Thinner to thin your application if necessary - usually 1 gallon Clear Guard Matte
20% - be careful not to over thin.
Application:
Apply 2 - 3 coats, making sure the first layer of lacquer
saturates the rust or patina. If spraying, use a HVLP sprayer at
approximately 20 psi with a 1.2 - 1.4 orifice tip. Allow 1 hour
for drying between coats.
PAINT & PATINAS

Smart Coat (indoor or outdoor use)
Smart Coat is a strong yet non-hazardous, zero VOC, non-odor, SCO08ZMAT
one part, self hardening, non-yellowing, and non-cracking, top 8 oz. Smart Coat 1K Matte
coat. Smart Coat works well over patinas, rust-oxides, as well as all SCO32ZMAT
32 oz. Smart Coat 1K Matte
clean polished metals. It may be diluted with water to allow for a SCO01GMAT
penetration of heavy oxides. The finish is beautiful, durable, and 1 gallon Smart Coat 1K Matte
hard. Smart Coat is a polymer/resin, yet dilutes and cleans up with
water and is eco friendly. Smart Coat tacks up and hardens quickly SCO08ZSAT
8 oz. Smart Coat 1K Satin
to a beautiful hard, thin coating that is fast drying. SCO32ZSAT
Application Conditions: 32 oz. Smart Coat 1K Satin
90°F (32°C) and below 85% humidity to ensure proper drying. This SCO01GSAT
1 gallon Smart Coat 1K Satin
sealer is self leveling and may be brush applied. You may put the
Smart Coat into your own sprayer (like a Crown, or Preval) or a HVLP
sprayer. No dilution is necessary while spraying. May be diluted up
to 25% with distilled water. Avoid applying in very windy and dusty
conditions. Cover surrounding areas to protect from spray mist.

T: 908.757.2323 ✛ F: 908.757.3439
AISALES@ARCHIRONDESIGN.COM ✛ ARCHIRONDESIGN.COM 337