Page 341 - CATALOG

METAL OIL & METAL WAX

Metal Oil (indoor or outdoor use) OIL08ZCLR
Metal Oils can be used on all metals. They have UV & Corrosive 8 oz. Clear Metal Oil
Inhibitors. Apply only thin coats of the Metal Oil with a soft cloth, OIL32ZCLR
32 oz. Clear Metal Oil
brush, or spray to the clean metal or dry patinated surface. Burnish OIL01GCLR
lightly with a clean cloth. Allow 3 to 12 hours to dry. Apply two coats. 1 gallon Clear Metal Oil
The oil is best applied to a surface at moderate temperatures around
70° F. Allow oil to cure for 3-4 days and a clear top coat or wax may OIL08ZBLK
be applied over the dried oil. For indoor or outdoor use. 8 oz. Black Metal Oil
OIL32ZBLK
© Sculpt Nouveau 32 oz. Black Metal Oil
OIL01GBLK
Brown Metal Oil 1 gallon Black Metal Oil
applied to brass
knob.
OIL08ZBRN
8 oz. Brown Metal Oil
OIL32ZBRN
32 oz. Brown Metal Oil
OIL01GBRN
1 gallon Brown Metal Oil

Metal Wax (indoor or outdoor use)
MWX08ZCLR
The finest quality waxes have been blended into a nonabrasive 8 oz. Clear Metal Wax
formula specifically to protect patinas and metal finishes. These waxes MWX32ZCLR
contain UV inhibitors and hardeners making them incredibly durable 32 oz. Clear Metal Wax
and long lasting on all types of metal. MWX01GCLR
1 gallon Clear Metal Wax
General Tips:
These metal waxes can be applied to hot or cold surfaces. However, MWX08ZBLK
they should not be applied to extremely hot surfaces. 8 oz. Black Metal Wax
MWX32ZBLK
When applying, smooth down any ridges or bumps. Stippling with a 32 oz. Black Metal Wax PAINT & PATINAS
brush may be the preferred method of application so as to not create MWX01GBLK
streaking on the surface. Try not to let the clear wax fill up in any 1 gallon Black Metal Wax
recessed areas as it may turn opaque when dry. Build up in recessed
areas may be desirable with the colored waxes.
Burnish the finish when the wax is dry (usually 1-2 hours). The colored MWX08ZBRN
waxes generally take longer to dry. If you are applying the wax to a 8 oz. Brown Metal Wax
hot surface, let the surface cool down completely, then buff. Use a MWX32ZBRN
32 oz. Brown Metal Wax
lint-free cloth (such as a microfiber cloth) to buff. Do not wait too long MWX01GBRN
as the wax will become too hard to burnish. 1 gallon Brown Metal Wax
Maintenance:
Lightly clean the surface every six months or as needed with a
non-ionic soap like Ivory® Soap. Dry completely and reapply a
new layer of wax with a brush. When dry, buff as before. If the
wax is maintained regularly, there is a good chance the clear sealer
will last a long time.

T: 908.757.2323 ✛ F: 908.757.3439
AISALES@ARCHIRONDESIGN.COM ✛ ARCHIRONDESIGN.COM 339