Page 334 - CATALOG

BIRCHWOOD & TRADITIONAL PATINAS

Birchwood Technologies Patinas (cold application)
Video presenting Presto
SSB Presto Black for Stainless Steel (FOR STAINLESS STEEL) Stainless Black
BIR08ZSSB
8 oz. Birchwood Technologies Presto Black for Stainless Steel
BIR32ZSSB
32 oz. Birchwood Technologies Presto Black for Stainless Steel
BIR01GSSB
1 gallon Birchwood Technologies Presto Black for Stainless Steel Birchwood Presto
Stainless Black
This stainless black patina will provide a more uniform, straight gray appearance.

Black Magic Traditional Patina (cold application) TBK08ZMAG
8 oz. Black Magic
Black Magic Patina instantly creates a beautiful rich black Traditional Patina
patina on clean iron & steel. Rust will not occur immediately TBK32ZMAG
as with other darkening patinas. Water rinsing is a good 32 oz. Black Magic
neutralizer and will not cause rust. Rust will occur after Traditional Patina
12 hours if a clear sealer is not applied. TBK01GMAG
1 gallon Black Magic
Black Magic will darken bonded bronze, brass, and copper Traditional Patina
castings to an orange-black color. Black Magic creates a © Sculpt Nouveau
beautiful brown-black patina on cleaned bronze, brass,
and copper.
Black Magic Patina applied
cold to cold rolled steel, then
burnished with steel wool

Slate Black Traditional Patina (cold or hot application) TBK08ZSLT
8 oz. Slate Black
Slate Black is a versatile and unique finish for use on iron, steel, Traditional Patina
stainless steel, aluminum, bronze, brass, or copper. TBK32ZSLT
Applied hot, Slate Black will create a deep brown patina on 32 oz. Slate Black
Traditional Patina
aluminum and a red-green finish on stainless steel. On iron, steel, TBK01GSLT
and nonferrous metals, Slate Black will form a black patina when 1 gallon Slate Black
applied cold. Traditional Patina
PAINT & PATINAS Before applying this patina, sandblasting or sanding is required to © Sculpt Nouveau
clean the surface of oil, oxides, and residues. Slate Black may be
applied as a spray or in an immersion process. Depending
on the application method chosen, the results will range from
a uniform solid color to a layered textured appearance. Slate Black
Patina may be diluted up to 50% with distilled water depending on
the desired strength of finish. The finish may be burnished wet or
dry. Additional patinas can be layered over a Slate Black base. When Slate Black Patina applied Slate Black Patina applied
dry, protect the finish with multiple coats of a clear sealer. hot to aluminum hot to stainless steel

Zinc Grey Traditional Patina (cold application) TBK08ZZNG
Zinc Grey Patina creates a grey or black patina on zinc or 8 oz. Zinc Grey
Traditional Patina
galvanized steel. The patina will be black and often mottled TBK32ZZNG
if applied at full strength. Dilution with distilled water is 32 oz. Zinc Grey
recommended for a smooth light grey finish. Layering the patina Traditional Patina
with multiple light coats will gradually darken the shade and allow TBK01GZNG
you to control the uniformity of the finish. When dry, protect the 1 gallon Zinc Grey
Traditional Patina
finish with a clear sealer.

T: 908.757.2323 ✛ F: 908.757.3439
332 AISALES@ARCHIRONDESIGN.COM ✛ ARCHIRONDESIGN.COM