Page 335 - CATALOG

TRADITIONAL PATINAS

Japanese Brown Traditional Patina (cold or hot application) TBR08ZJBR
8 oz. Japanese Brown
This patina may also be used on bronze, brass and copper but Traditional Patina
is mainly used on iron and steel. When applied to bronze, brass TBR32ZJBR
or copper, it will result in a golden color. When applied cold on 32 oz. Japanese
iron and steel, a brown rust will form. When applied to heated Brown Traditional
Patina
steel, a dark chocolate brown will form. Clean the metal TBR01GJBR
surface before application. If the metal is smooth it will be a 1 gallon Japanese
shinier patina. If the metal surface is sandblasted it will look Brown Traditional © Sculpt Nouveau
more like satin. Heat will darken the color as well as make it Patina
less mottled. Rinsing is not manditory. If you don’t rinse, leave Japanese Brown
the patina alone for 24 hours before applying a clear sealer. Do Patina applied hot
not use on aluminum, galvanized or stainless steel. to hot rolled steel

Traditional Darkening Patina (cold application) TBR08ZDAR
Darkening patina is great for aging or darkening metals. 8 oz. Traditional
Darkening Patina
This patina may also be used on bronze, brass and copper. It TBR32ZDAR
creates a beautiful brown color. This patina is often diluted with 32 oz. Traditional
Darkening Patina
distilled water; otherwise the patina will be very dark. For a nice TBR01GDAR
transparent brown, it may also be applied on iron and steel. Apply 1 gallon Traditional
a clear sealer or wax after the patina is dry. Darkening Patina

Traditional Deep Brown Patina (cold application) TBR08ZDBR
Deep Brown Patina creates a slow reacting brown finish on 8 oz. Traditional
Deep Brown Patina
bronze, brass, and copper. On iron and steel, it will produce a TBR32ZDBR
quick dark brown patina with greys and blacks. On zinc, the 32 oz. Traditional
finish is a fast developing yellow brown. It should not be used on Deep Brown Patina
stainless steel. Deep Brown Patina does not need to be diluted, TBR01GDBR
but may be thinned with distilled water for lighter coats or colors. 1 gallon Traditional
Deep Brown Patina
Additional coats will darken the patina.

Tiffany Green Traditional Patina (cold application) TGR08ZTGR PAINT & PATINAS
8 oz. Tiffany Green
This is a beautiful stable green. It is an old formula developed by Tiffany Traditional Patina
for Tiffany lamp bases. If it is overlapped or applied heavily it may “pop TGR32ZTGR
off” and will tend to go a little blue. Tiffany Green tends to be slow to 32 oz. Tiffany Green
react, but worth the wait. To see the results, let it sit overnight. Traditional Patina
TGR01GTGR
Clean the metal first as with any other patina. Spray, brush, or sponge on 1 gallon Tiffany Green
the patina. Let the reaction work for 2 - 6 hours. Reapply if a deeper color Traditional Patina
is desired. No rinsing is necessary. If used on iron or steel, rust will occur.
Don’t use on aluminum. Set with a clear sealer when done. For indoor or
outdoor use.
© Sculpt Nouveau Tiffany Green Patina
applied cold to copper

T: 908.757.2323 ✛ F: 908.757.3439
AISALES@ARCHIRONDESIGN.COM ✛ ARCHIRONDESIGN.COM 333