Page 332 - CATALOG
P. 332
METAL CLEANER & DEGREASER
Sculpt Nouveau’s Metal Cleaner and Degreaser has been
The surface of the material you are working specially developed for the rapid and complete removal of
on should be clean and free of any dirt or rust, dirt, oil, and grease from most metal surfaces in
grease. When working with iron, steel or preparation for finish applications.
aluminum you may want to remove rust This ready-to-use formula removes oxidation quickly and
and fire scale. The best method for cleaning efficiently without leaving any residue or buildup that would
prevent finish adhesion. Additionally, the Metal Cleaner and
most materials is to sandblast. Different Degreaser contain corrosion inhibitors that protect the metal
types of blasting material may be used in surface during cleaning.
order to achieve the desired surface. Wire The Metal Cleaner and Degreaser is not a polish and will
wheels or Scotch-Brite Pads are another remove the finish on polished and plated surfaces. It is
method of cleaning. available in 8 oz., 32 oz., and 1 gal. sizes. The 8 oz. and 32 oz.
sizes include a spray top.
Be careful not to leave any polishing
compound on the surface. A good metal Instructions for Application on Bronze, Brass, and Copper:
cleaner is a great way to get the surface (1) Apply the cleaner with a brush, sponge or rag.
ready to work on. Sometimes mild acids (2) Let stand on the metal for approx. 5 minutes.
are used, but they can interfere with the (3) Rub with a green or gray Scotch-Brite pad.
patina process that comes later. Sculpt (4) Rinse with water.
(5) Repeat if necessary.
Nouveau’s Metal Cleaner/Degreaser is (6) Dry the surface.
a great metal cleaner. It works on both (7) Apply the desired finish to the metal surface.
ferrous and non-ferrous metals.
Instructions for Application on Iron, Steel, and Aluminum:
(1) Repeat the steps above, but dry quickly and thoroughly so
that rust does not begin to form. Do not clean your metal
SUR08ZMDD until you are ready to apply the patina.
8 oz. Metal Cleaner (2) Apply your desired finish immediately to the clean metal.
and Degreaser You must apply the patina as soon as possible and seal as
SUR32ZMDD
32 oz. Metal Cleaner soon as it is completely dry.
and Degreaser
SUR01GMDD
1 gallon Metal Cleaner
PAINT & PATINAS and Degreaser
DO NOT USE ACETONE
to clean your metal surface
The acetone leaves a residue on the
surface which will interfere with the
adhesion of the sealers and will alter
the patina and/or cause it to not
react properly.
T: 908.757.2323 ✛ F: 908.757.3439
330 AISALES@ARCHIRONDESIGN.COM ✛ ARCHIRONDESIGN.COM
