Page 265 - Catalog

SCULPT NOUVEAU PATINAS AND METAL FINISHES

STEP 2 - Apply the Appropriate Patina (continued)

Tiany Green Traditional Patina (cold application)
This is a beautiful stable green. It is an old formula developed by Tiany TGR08ZTGR
for Tiany lamp bases. If it is overlapped or applied heavily it may “pop 8 oz. Tiany Green
o” and will tend to go a little blue. Tiany Green tends to be slow to Traditional Patina
react, but worth the wait. To see the results, let it sit overnight. TGR32ZTGR
32 oz. Tiany Green
Clean the metal rst as with any other patina. Spray, brush, or sponge on Traditional Patina
the patina. Let the reaction work for 2 - 6 hours. Reapply if a deeper color TGR01GTGR
is desired. No rinsing is necessary. If used on iron or steel, rust will occur. 1 gallon Tiany Green
Don’t use on aluminum. Set with a clear sealer when done. For indoor or Traditional Patina
outdoor use.
© Sculpt Nouveau Tiany Green Patina
applied cold to copper

Smart Stains (cold application)
Smart Stain is a strong, non-hazardous, fast drying patina system. It has no SST08ZBRN
VOC’s and no odor. Smart Stain contains UV inhibitors and will not fade 8 oz. Brown
Smart Stain
outdoors if maintained properly. It will clean up with warm, sudsy water. SST32ZBRN
Smart Stain is very versatile. All colors are transparent and may be 32 oz. Brown
blended or layered onto any metal including iron, steel and aluminum. Smart Stain
When applying Smart Stain onto a bare surface, we recommend that the SST01GBRN
1 gallon Brown
surface be oil-free and slightly roughed up. To alter or enhance the color, Smart Stain
Smart Stain may be applied over another patina surface once dry.
Smart Stain is made by combining nely ground, naturally occurring SST08ZBLK
colored oxides with a water base polymer/resin binder. It is sold in 8 oz. Black PAINT &
concentrated form and may be diluted with distilled water up to 25% to Smart Stain PATINAS
increase transparency. Only Smart Coat should be used to dilute it SST32ZBLK
32 oz. Black
any further. Smart Stain
Instructions for Application: SST01GBLK
1 gallon Black
(1) Shake well. Smart Stain
(2) Clean the surface of the material and make sure it is completely dry
before applying Smart Stain.
(3) Apply by spray, sponge, roller, or brush. Apply as many coats as
needed to achieve the desired color. If applying over a patina,
make sure the rst layer of Smart Stain saturates the rust or patina.
Allow 1 hour to fully cure between coats.
NOTE:
For exterior applications, Smart Stains should be sealed with three layers
of Smart Coat, Clear Guard or Ever Clear. Maintenance requirements will Smart Stains may be applied to warmed
metal. Heat metal with a heat gun or
vary by location. In most environments, regular application of Sculpt torch up to 120°F. Apply by any method
Nouveau’s Metal Wax or Metal Oil, over the clear coat, is sucient to to achieve desired eect. Seal when dry.
maintain this nish.
T: 800.784.7444 T: 908.757.2323 F: 908.757.3439
AISALES@ARCHIRONDESIGN.COM ARCHIRONDESIGN.COM 263