Page 263 - Catalog

SCULPT NOUVEAU PATINAS AND METAL FINISHES

STEP 2 - Apply the Appropriate Patina (continued)

Black Magic Traditional Patina (cold application)
TBK08ZMAG
Black Magic Patina instantly creates a beautiful rich black 8 oz. Black Magic
patina on clean iron & steel. Rust will not occur immediately Traditional Patina
as with other darkening patinas. Water rinsing is a good TBK32ZMAG
neutralizer and will not cause rust. Rust will occur after 32 oz. Black Magic
Traditional Patina
12 hours if a clear sealer is not applied. TBK01GMAG
Black Magic will darken bonded bronze, brass, and copper 1 gallon Black Magic
castings to an orange-black color. Black Magic creates a Traditional Patina
beautiful brown-black patina on cleaned bronze, brass,
and copper.

© Sculpt Nouveau Black Magic Patina applied
cold to cold rolled steel, then
burnished with steel wool

Traditional Darkening Patina (cold application) TBR08ZDAR
8 oz. Traditional
Darkening patina is great for aging or darkening metals.
Darkening Patina
This patina may also be used on bronze, brass and copper. It TBR32ZDAR
creates a beautiful brown color. This patina is often diluted with 32 oz. Traditional
Darkening Patina
distilled water; otherwise the patina will be very dark. For a nice TBR01GDAR
transparent brown, it may also be applied on iron and steel. Apply 1 gallon Traditional
a clear sealer or wax after the patina is dry. Darkening Patina

Slate Black Traditional Patina (cold or hot application) TBK08ZSLT
Slate Black is a versatile and unique nish for use on iron, 8 oz. Slate Black
Traditional Patina
steel, stainless steel, aluminum, bronze, brass, or copper. TBK32ZSLT PAINT & PATINAS
Applied hot, Slate Black will create a deep brown patina on 32 oz. Slate Black
Traditional Patina
aluminum and a red-green nish on stainless steel. On iron, TBK01GSLT
steel, and nonferrous metals, Slate Black will form a black 1 gallon Slate Black
patina when applied cold. Traditional Patina
Before applying this patina, sandblasting or sanding is required
to clean the surface of oil, oxides, and residues. Slate Black may © Sculpt Nouveau
be applied as a spray or in an immersion process. Depending
on the application method chosen, the results will range from
a uniform solid color to a layered textured appearance. Slate
Black Patina may be diluted up to 50% with distilled water
depending on the desired strength of nish. The nish may be
burnished wet or dry. Additional patinas can be layered over a
Slate Black base. When dry, protect the nish with multiple coats
of a clear sealer.
Slate Black Patina applied Slate Black Patina applied
hot to aluminum hot to stainless steel

T: 800.784.7444 T: 908.757.2323 F: 908.757.3439
AISALES@ARCHIRONDESIGN.COM ARCHIRONDESIGN.COM 261