Page 264 - Catalog

SCULPT NOUVEAU PATINAS AND METAL FINISHES

STEP 2 - Apply the Appropriate Patina (continued)

Stainless Black Traditional Patina (cold application) TBK08ZSTA
8 oz. Stainless Black
Stainless Black is made to create a black patina nish on stainless Traditional Patina
steel. TBK32ZSTA
32 oz. Stainless Black
In order for this patina to react, you must remove the nickel and Traditional Patina
chrome from the surface before applying the patina. TBK01GSTA
Clean the metal surface before application. Sandblasting is the 1 gallon Stainless Black
Traditional Patina
recommended method but you may also use an orbital sander
with 80 to 120 grit sandpaper, or the metal can also be soaked © Sculpt Nouveau Traditional Stainless
in muriatic acid. Apply by spray or immersion. The solution may Black Patina lightly
be diluted with distilled water, but it is usually used in its full sprayed on stainless
strength. The amount of dilution will depend on your metal and steel
the color desired. A normal dilution range would be between
25% - 50%. Apply a clear sealer. Tinted clear stains are beautiful
when applied over this patina.

TBR08ZJBR
Japanese Brown Traditional Patina (cold or hot application) 8 oz. Japanese Brown
Traditional Patina
This patina may also be used on bronze, brass and copper but TBR32ZJBR
is mainly used on iron and steel. When applied to bronze, brass 32 oz. Japanese
or copper, it will result in a golden color. When applied cold on Brown Traditional
iron and steel, a brown rust will form. When applied to heated Patina
steel, a dark chocolate brown will form. Clean the metal TBR01GJBR
surface before application. If the metal is smooth it will be a 1 gallon Japanese
shinier patina. If the metal surface is sandblasted it will look Brown Traditional
Patina
more like satin. Heat will darken the color as well as make it
less mottled. Rinsing is not manditory. If you don’t rinse, leave © Sculpt Nouveau Japanese Brown
the patina alone for 24 hours before applying a clear sealer. Do Patina applied hot
not use on aluminum, galvanized or stainless steel. to hot rolled steel

PAINT & PATINAS

Universal Patina (hot application) UNI08ZRUS
8 oz. Rust Universal Patina
Universal Patinas are non-reactive, UV safe, do not contain UNI32ZRUS
acids and are environmentally friendly with no VOC’s. 8 oz. Rust Universal Patina
UNI01GRUS
Any metal surface needs to be cleaned before application. 8 oz. Rust Universal Patina
For best adhesion, Universals should be applied hot. Heat the
metal to approximately 180°F-220°F. Universals are heat tol-
erant, scratch resistant, and may be used as a base for other
patinas. A clear sealer is always recommended to protect your
nish.

T: 800.784.7444 T: 908.757.2323 F: 908.757.3439
262 AISALES@ARCHIRONDESIGN.COM ARCHIRONDESIGN.COM