Page 261 - Catalog
P. 261
SCULPT NOUVEAU PATINAS AND METAL FINISHES
STEP 1 - Metal Cleaning
METAL CLEANER DEGREASER
The surface of the material you are working Sculpt Nouveau’s Metal Cleaner and Degreaser has been
on should be clean and free of any dirt or specially developed for the rapid and complete removal of
grease. When working with iron, steel or rust, dirt, oil, and grease from most metal surfaces in
aluminum you may want to remove rust preparation for nish applications.
and re scale. The best method for cleaning This ready-to-use formula removes oxidation quickly and
most materials is to sandblast. Dierent eciently without leaving any residue or buildup that would
prevent nish adhesion. Additionally, the Metal Cleaner and
types of blasting material may be used in Degreaser contain corrosion inhibitors that protect the metal
order to achieve the desired surface. Wire surface during cleaning.
wheels or Scotch-Brite Pads are another The Metal Cleaner and Degreaser is not a polish and will
method of cleaning. remove the nish on polished and plated surfaces. It is
available in 8 oz., 32 oz., and 1 gal. sizes. The 8 oz. and 32 oz.
Be careful not to leave any polishing sizes include a spray top.
compound on the surface. A good metal
cleaner is a great way to get the surface
ready to work on. Sometimes mild acids Instructions for Application on Bronze, Brass, and Copper:
(1) Apply the cleaner with a brush, sponge or rag.
are used, but they can interfere with the (2) Let stand on the metal for approx. 5 minutes.
patina process that comes later. Sculpt (3) Rub with a green or gray Scotch-Brite pad.
Nouveau’s Metal Cleaner/Degreaser is (4) Rinse with water.
a great metal cleaner. It works on both (5) Repeat if necessary.
(6) Dry the surface.
ferrous and non-ferrous metals. (7) Apply the desired nish to the metal surface.
Instructions for Application on Iron, Steel, and Aluminum:
(1) Repeat the steps above, but dry quickly and thoroughly so
SUR08ZMDD that rust does not begin to form. Do not clean your metal
8 oz. Metal Cleaner until you are ready to apply the patina.
and Degreaser (2) Apply your desired nish immediately to the clean metal.
SUR32ZMDD
32 oz. Metal Cleaner You must apply the patina as soon as possible and seal as
and Degreaser soon as it is completely dry. PAINT & PATINAS
SUR01GMDD
1 gallon Metal Cleaner
and Degreaser
DO NOT USE ACETONE
to clean your metal surface
The acetone leaves a residue on the
surface which will interfere with the
adhesion of the sealers and will alter
the patina and/or cause it to not
react properly.
T: 800.784.7444 T: 908.757.2323 F: 908.757.3439
AISALES@ARCHIRONDESIGN.COM ARCHIRONDESIGN.COM 259
