Page 269 - Catalog

SCULPT NOUVEAU PATINAS AND METAL FINISHES

STEP 3 - Apply a Protective Sealer (continued)

Metal Oil (indoor or outdoor use)
OIL08ZCLR
Metal Oils can be used on all metals. They have UV & Corrosive 8 oz. Clear Metal Oil
Inhibitors. Apply only thin coats of the Metal Oil with a soft cloth, OIL32ZCLR
brush, or spray to the clean metal or dry patinated surface. Burnish 32 oz. Clear Metal Oil
lightly with a clean cloth. Allow 3 to 12 hours to dry. Apply two coats. OIL01GCLR
1 gallon Clear Metal Oil
The oil is best applied to a surface at moderate temperatures around
70° F. Allow oil to cure for 3-4 days and a clear top coat or wax may
be applied over the dried oil. For indoor or outdoor use. OIL08ZBLK
8 oz. Black Metal Oil
OIL32ZBLK
© Sculpt Nouveau 32 oz. Black Metal Oil
Brown Metal Oil OIL01GBLK
applied to brass 1 gallon Black Metal Oil
knob.

Metal Wax (indoor or outdoor use)
MWX08ZCLR
The nest quality waxes have been blended into a nonabrasive 8 oz. Clear Metal Wax
formula specically to protect patinas and metal nishes. These waxes MWX32ZCLR
contain UV inhibitors and hardeners making them incredibly durable 32 oz. Clear Metal Wax
and long lasting on all types of metal. MWX01GCLR
1 gallon Clear Metal Wax
General Tips:
These metal waxes can be applied to hot or cold surfaces. However, MWX08ZBLK
they should not be applied to extremely hot surfaces. 8 oz. Black Metal Wax
MWX32ZBLK
When applying, smooth down any ridges or bumps. Stippling with a 32 oz. Black Metal Wax PAINT & PATINAS
brush may be the preferred method of application so as to not create MWX01GBLK
streaking on the surface. Try not to let the clear wax ll up in any 1 gallon Black Metal Wax
recessed areas as it may turn opaque when dry. Build up in recessed
areas may be desirable with the colored waxes.
Burnish the nish when the wax is dry (usually 1-2 hours). The colored
waxes generally take longer to dry. If you are applying the wax to a
hot surface, let the surface cool down completely, then bu. Use a
lint-free cloth (such as a microber cloth) to bu. Do not wait too long
as the wax will become too hard to burnish.
Maintenance:
Lightly clean the surface every six months or as needed with a
non-ionic soap like Ivory® Soap. Dry completely and reapply a
new layer of wax with a brush. When dry, bu as before. If the
wax is maintained regularly, there is a good chance the clear sealer
will last a long time.

T: 800.784.7444 T: 908.757.2323 F: 908.757.3439
AISALES@ARCHIRONDESIGN.COM ARCHIRONDESIGN.COM 267