Page 257 - Catalog

RUSTRESOLVE RUST CONVERTER

What does do?

RUSTRESOLVE oers an easy and eective way to deal with existing rust without the

need for sandblasting or hours of wire brushing. Simply wire brush o any aking rust
and apply RUSTRESOLVE. Within minutes, the rust will disappear and the surface will
turn a bluish black color that you can paint over.

RUSTRESOLVE
• Is a complex mixture of vinyl acrylic copolymer and tannic acid for the treatment
of corroded steel and iron surfaces.
• Is a strong, yet eco-friendly, zero VOC product that neutralizes the corrosion
process. It then further protects the surface by forming a lm with low
permeability to water vapor and oxygen.
• Is self priming but for long term protection it is advisable to overcoat with a
suitable water or solvent based midcoat or topcoat.
• One liter can treats 8-9 square meters.
• Can be used in the following areas: Manufacturing, Agriculture, Automotive, Chemical, Marine,
Heavy Engineering, Building and Construction, DIY, etc.

Call 800-784-7444 or visit www.archirondesign.com/rustresolve to place your order
112/15 - 250ml 112/13 - 1 Liter 112/14 - 5 Liters

Application
Surfaces should be wire brushed to remove loose rust and washed Rusty Surface
with water to remove soluble salts as they inhibit the conversion
process. Surfaces should also be free of oil and grease.
RUSTRESOLVE has been designed for application by spray and
brush. By airless spray a dry lm thickness of up to 60 microns can
be achieved without sagging. The addition of further water may be PAINT & PATINAS
necessary for air assisted spraying. By brush application, a dry lm
thickness of 40 microns per coat is considered optimum.
RUSTRESOLVE can be applied over damp surfaces and dries
quickly under suitable temperature and humidity conditions.
Immediately after use, equipment should be washed in water to
remove all traces of RUSTRESOLVE. After Application
Drying Conditions

Temperature, humidity, air movement and lm thickness all
aect drying time. Under ideal conditions, a 100 micron wet lm
of RUSTRESOLVE will be dry to the touch in approximately
10 minutes at 68°F, whereas at 50°F and with little air movement,
this time can be as long as 2 hours. RUSTRESOLVE should not
be applied at temperatures below 50°F, or when there is risk of
condensation or rain during this drying period.

Visit www.archirondesign.com/resource-center to download the MSDS sheet from our technical library.
T: 800.784.7444 T: 908.757.2323 F: 908.757.3439
AISALES@ARCHIRONDESIGN.COM ARCHIRONDESIGN.COM 255