Signal Configuration (0x0E,0x02)
| Description |
Configure the GNSS signals used by the device. |
|
| Notes |
|
|
| Parameter Name | Data Type | Description |
| Field Length | u8 | 11 |
| Descriptor | u8 | 0x02 |
| Function Selector | u8 |
This command supports the following MIP function selectors:Write Read Save Load Default
[WRSLD]
|
Gps Enable
[W]
|
u8 | Bitfield 0: Enable L1CA, 1: Enable L2C, 2: Enable L5 |
Glonass Enable
[W]
|
u8 | Bitfield 0: Enable L1OF, 1: Enable L2OF |
Galileo Enable
[W]
|
u8 | Bitfield 0: Enable E1, 1: Enable E5B, 2: Enable E5A |
Beidou Enable
[W]
|
u8 | Bitfield 0: Enable B1, 1: Enable B2, 2: Enable B2A |
Reserved
[W]
|
u8[4] | |
| Response Data | Data Type | Description |
| Response Length | u8 | 10 |
| Response Descriptor | u8 | 0x82 |
| Gps Enable | u8 | Bitfield 0: Enable L1CA, 1: Enable L2C, 2: Enable L5 |
| Glonass Enable | u8 | Bitfield 0: Enable L1OF, 1: Enable L2OF |
| Galileo Enable | u8 | Bitfield 0: Enable E1, 1: Enable E5B, 2: Enable E5A |
| Beidou Enable | u8 | Bitfield 0: Enable B1, 1: Enable B2, 2: Enable B2A |
| Reserved | u8[4] | |