use_pty:FALSE /usr/share/restraint/plugins/run_task_plugins bash ./runtest.sh :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Setup :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: [ 14:15:29 ] :: [ BEGIN ] :: Running 'dmidecode --type 38 > /tmp/dmidecode.log' :: [ 14:15:30 ] :: [ LOG ] :: Output of 'dmidecode --type 38 > /tmp/dmidecode.log': :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 14:15:30 ] :: [ PASS ] :: Command 'dmidecode --type 38 > /tmp/dmidecode.log' (Expected 0, got 0) IPMI Device Information :: [ 14:15:30 ] :: [ PASS ] :: Moving on, host is ipmi compatible :: [ 14:15:30 ] :: [ BEGIN ] :: Running 'modprobe -r ipmi_ssif ipmi_devintf ipmi_poweroff ipmi_watchdog ipmi_si' modprobe: FATAL: Module ipmi_si is in use. :: [ 14:15:30 ] :: [ PASS ] :: Command 'modprobe -r ipmi_ssif ipmi_devintf ipmi_poweroff ipmi_watchdog ipmi_si' (Expected 0,1, got 1) :: [ 14:15:30 ] :: [ BEGIN ] :: Running 'modprobe ipmi_ssif' :: [ 14:15:30 ] :: [ LOG ] :: Output of 'modprobe ipmi_ssif': :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 14:15:30 ] :: [ PASS ] :: Command 'modprobe ipmi_ssif' (Expected 0,1, got 0) :: [ 14:15:30 ] :: [ BEGIN ] :: Running 'modprobe ipmi_devintf' :: [ 14:15:30 ] :: [ LOG ] :: Output of 'modprobe ipmi_devintf': :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 14:15:30 ] :: [ PASS ] :: Command 'modprobe ipmi_devintf' (Expected 0,1, got 0) :: [ 14:15:30 ] :: [ BEGIN ] :: Running 'modprobe ipmi_poweroff' :: [ 14:15:30 ] :: [ LOG ] :: Output of 'modprobe ipmi_poweroff': :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 14:15:30 ] :: [ PASS ] :: Command 'modprobe ipmi_poweroff' (Expected 0,1, got 0) :: [ 14:15:30 ] :: [ BEGIN ] :: Running 'modprobe ipmi_watchdog' :: [ 14:15:30 ] :: [ LOG ] :: Output of 'modprobe ipmi_watchdog': :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 14:15:30 ] :: [ PASS ] :: Command 'modprobe ipmi_watchdog' (Expected 0,1, got 0) :: [ 14:15:30 ] :: [ BEGIN ] :: Running 'modprobe ipmi_si' :: [ 14:15:30 ] :: [ LOG ] :: Output of 'modprobe ipmi_si': :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 14:15:30 ] :: [ PASS ] :: Command 'modprobe ipmi_si' (Expected 0,1, got 0) :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Duration: 1s :: Assertions: 8 good, 0 bad :: RESULT: PASS (Setup) ** Setup PASS Score:0 Uploading resultoutputfile.log .done :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Test :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: [ 14:15:30 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ BEGIN ] :: Running 'ipmitool sel list' 1 | 01/25/2023 | 09:15:30 AM EST | Event Logging Disabled #0x72 | Log area reset/cleared | Asserted :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 4c4c4544-0042-3910-8039-c6c04f544833 GUID Encoding : SMBIOS (WARNING: IPMI Specification violation!) GUID Version : Name-based using MD5 :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : command Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Sleep Button Disable : not allowed Diag Button Disable : not allowed Reset Button Disable : not allowed Power Button Disable : allowed Sleep Button Disabled: false Diag Button Disabled : false Reset Button Disabled: false Power Button Disabled: false :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 14:15:32 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:15:32 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 14:15:32 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:15:32 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Loading IANA PEN Registry... Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : Temp (0x1) Entity ID : 3.1 Sensor Type (Threshold) : Temperature Sensor Reading : 38 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Temp (0x2) Entity ID : 3.2 Sensor Type (Threshold) : Temperature Sensor Reading : 36 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Inlet Temp (0x5) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : -7.000 Lower Non-Critical : 3.000 Upper Non-Critical : 43.000 Upper Critical : 47.000 Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : lnc- lcr- unc+ ucr+ Deassertions Enabled : lnc- lcr- unc+ ucr+ Sensor ID : DIMM PG (0x7) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : NDC PG (0x8) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS1 PG FAIL (0x9) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS2 PG FAIL (0xa) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP0 PG (0xb) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP1 PG (0xc) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 1.8V SW PG (0xe) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 2.5V SW PG (0xf) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 5V SW PG (0x10) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PVNN SW PG (0x11) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSB11 SW PG (0x12) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSBM SW PG (0x13) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 3.3V B PG (0x15) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x24) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x25) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x26) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x27) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x28) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x29) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x2a) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x2b) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x2c) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x2e) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x2f) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x30) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x31) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x32) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x33) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x34) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x35) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x36) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : Fan1A (0x38) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan1B (0x40) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2A (0x39) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2B (0x41) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3A (0x3a) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3B (0x42) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Presence (0x48) Entity ID : 10.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x49) Entity ID : 10.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4a) Entity ID : 11.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4b) Entity ID : 11.3 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Intrusion Cable (0x51) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : VGA Cable Pres (0x52) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Presence (0x58) Entity ID : 11.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : BP0 Presence (0x59) Entity ID : 26.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : BP1 Presence (0x5a) Entity ID : 26.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Power Cable (0x5c) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Signal Cable (0x5d) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Power JBP1 (0x5e) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Signal Cable (0x5f) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Power JBP2 (0x60) Entity ID : 26.3 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Presence (0x66) Entity ID : 3.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x67) Entity ID : 3.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Current 1 (0x6b) Entity ID : 10.1 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Current 2 (0x6c) Entity ID : 10.2 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 1 (0x6d) Entity ID : 10.1 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 2 (0x6e) Entity ID : 10.2 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Riser Config Err (0x6f) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : OS Watchdog (0x71) Entity ID : 7.1 Sensor Type (Discrete): Watchdog2 Sensor ID : SEL (0x72) Entity ID : 0.1 Sensor Type (Discrete): Event Logging Disabled Unable to read sensor: Device Not Present Sensor ID : Intrusion (0x73) Entity ID : 7.1 Sensor Type (Discrete): Physical Security Sensor ID : Power Optimized (0x75) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Pwr Consumption (0x76) Entity ID : 7.1 Sensor Type (Threshold) : Current Sensor Reading : 144 (+/- 0) Watts Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 1632.000 Upper Critical : 1800.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertion Events : Assertions Enabled : unc+ ucr+ Deassertions Enabled : unc+ ucr+ Sensor ID : PS Redundancy (0x77) Entity ID : 7.1 Sensor Type (Discrete): Power Supply Unable to read sensor: Device Not Present Sensor ID : Fan Redundancy (0x78) Entity ID : 7.1 Sensor Type (Discrete): Fan States Asserted : Fan [Fully Redundant] Sensor ID : Redundancy (0x79) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD1 (0x7a) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD2 (0x7b) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD (0x7c) Entity ID : 11.4 Sensor Type (Discrete): Module / Board Unable to read sensor: Device Not Present Sensor ID : IO Usage (0x7d) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 0 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : MEM Usage (0x7e) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : SYS Usage (0x7f) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : CPU Usage (0x80) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 1 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : Status (0x81) Entity ID : 3.1 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x82) Entity ID : 3.2 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x85) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : Status (0x86) Entity ID : 10.2 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : CMOS Battery (0x87) Entity ID : 7.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : ROMB Battery (0x88) Entity ID : 11.2 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : PCIe Slot1 (0x8b) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Sensor ID : PCIe Slot2 (0x8c) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCIe Slot3 (0x8d) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Drive 0 (0x98) Entity ID : 7.1 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : Cable PCIe A0 (0xba) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xbb) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A1 (0xbc) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B1 (0xbd) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A2 (0xbe) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B2 (0xbf) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A0 (0xc0) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS B0 (0xc1) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS A1 (0xc2) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B1 (0xc3) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A2 (0xc4) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B2 (0xc5) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A0 (0xc8) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xc9) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : ECC Corr Err (0x1) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : ECC Uncorr Err (0x2) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : PCI Parity Err (0x4) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCI System Err (0x5) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : SBE Log Disabled (0x6) Entity ID : 34.1 Sensor Type (Discrete): Event Logging Disabled States Asserted : Event Logging Disabled Sensor ID : Unknown (0x8) Entity ID : 34.1 Sensor Type (Discrete): System Event States Asserted : System Event [System Reconfigured] Sensor ID : CPU Machine Chk (0xd) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [Transition to OK] Sensor ID : Memory Spared (0x11) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : Memory Mirrored (0x12) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : PCIE Fatal Err (0x18) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : Chipset Err (0x19) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Err Reg Pointer (0x1a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Mem ECC Warning (0x1b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Transition to Non-recoverable] [Monitor] Sensor ID : POST Err (0x1e) Entity ID : 34.1 Sensor Type (Discrete): System Firmwares Unable to read sensor: Device Not Present Sensor ID : Hdwr version err (0x1f) Entity ID : 34.1 Sensor Type (Discrete): Version Change Unable to read sensor: Device Not Present Sensor ID : Non Fatal PCI Er (0x26) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal IO Error (0x27) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MSR Info Log (0x28) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TXT Status (0x2a) Entity ID : 34.1 Sensor Type (Discrete): OS Critical Stop States Asserted : OS Critical Stop [Error during system startup] Sensor ID : iDPT Mem Fail (0x2b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Correctable ECC] Sensor ID : Additional Info (0x2e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU TDP (0x2f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x30) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x31) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x32) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x33) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Error (0x34) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x35) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x36) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chassis Mismatch (0x37) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change detected] Sensor ID : FatalPCIErrOnBus (0x38) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErBus (0x39) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal PCI SSD Er (0x3a) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalSSDEr (0x3b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPUMachineCheck (0x3c) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [SM BIOS Uncorrectable CPU-complex Error] [Presence detected] Sensor ID : FatalPCIErARI (0x3d) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErARI (0x3e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : FatalPCIExpEr (0x3f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NonFatalPCIExpEr (0x40) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Cable SAS A0 (0xc6) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B0 (0xc7) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Fan4A (0x3b) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan4B (0x43) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5A (0x3c) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5B (0x44) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6A (0x3d) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6B (0x45) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7920 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7A (0x3e) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7B (0x46) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8A (0x3f) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8B (0x47) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Unresp sensor (0xfe) Entity ID : 7.1 Sensor Type (Discrete): Other Sensor ID : CP Left Pres (0x56) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : CP Right Pres (0x57) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : 3.3V A PG (0x14) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x2d) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x37) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : TPM Presence (0x54) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Riser 1 Presence (0x4d) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Riser 2 Presence (0x4e) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Front LED Panel (0x23) Entity ID : 7.1 Sensor Type (Discrete): Management Subsys Health Sensor ID : OS Watchdog Time (0x23) Entity ID : 34.1 Sensor Type (Discrete): Watchdog2 Sensor ID : Fan1A Status (0xe2) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan1B Status (0xe3) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2A Status (0xe4) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2B Status (0xe5) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3A Status (0xe6) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3B Status (0xe7) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4A Status (0xe8) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4B Status (0xe9) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5A Status (0xea) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5B Status (0xeb) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6A Status (0xec) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6B Status (0xed) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7A Status (0xee) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7B Status (0xef) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8A Status (0xf0) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8B Status (0xf1) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Warning (0x46) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Error (0x47) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Info (0x48) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Dedicated NIC (0x70) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4c) Entity ID : 11.4 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : NVDIMM Battery (0x6a) Entity ID : 7.1 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : Exhaust Temp (0x6) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 37 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : 8.000 Upper Non-Critical : 75.000 Upper Critical : 80.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : Sensor ID : LT/Flex Addr (0x25) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPI Link Err (0x29) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TPM Presence (0x41) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change success] Sensor ID : CPU Link Info (0x42) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chipset Info (0x43) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Memory Config (0x44) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : POST Pkg Repair (0x45) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Redundancy Degraded from Fully Redundant] [Redundancy Degraded from Non-Redundant] Sensor ID : Pfault Fail Safe (0x74) Entity ID : 7.1 Sensor Type (Discrete): Voltage Unable to read sensor: Device Not Present Sensor ID : BP2 PG (0xd) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MMIOChipset Info (0x49) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMM Media Info (0x4a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMMThermal Info (0x4b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU Internal Err (0x9) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [IERR] Sensor ID : GPU1 Temp (0x89) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU2 Temp (0x8a) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU3 Temp (0x62) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : A1 (0xca) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : A2 (0xcb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A3 (0xcc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A4 (0xcd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A5 (0xce) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A6 (0xcf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A7 (0xd0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A8 (0xd1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A9 (0xd2) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A10 (0xd3) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A11 (0xd4) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A12 (0xd5) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B1 (0xd6) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : B2 (0xd7) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B3 (0xd8) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B4 (0xd9) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B5 (0xda) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B6 (0xdb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B7 (0xdc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B8 (0xdd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B9 (0xde) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B10 (0xdf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B11 (0xe0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B12 (0xe1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : Therm Config Err (0xfa) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : VCORE VR (0x17) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : VCORE VR (0x18) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1a) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1b) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1c) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1d) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : :: [ 14:15:37 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:15:37 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 32 Device Revision : 1 Firmware Revision : 5.00 IPMI Version : 2.0 Manufacturer ID : 674 Manufacturer Name : Dell Inc. Product ID : 256 (0x0100) Product Name : Unknown (0x100) Device Available : yes Provides Device SDRs : yes Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver Bridge Chassis Device Aux Firmware Rev Info : 0x00 0x01 0x0a 0x14 :: [ 14:15:37 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:15:37 ] :: [ BEGIN ] :: Running 'ipmitool sdr' Temp | 38 degrees C | ok Temp | 35 degrees C | ok Inlet Temp | 30 degrees C | ok DIMM PG | 0x00 | ok NDC PG | 0x00 | ok PS1 PG FAIL | 0x00 | ok PS2 PG FAIL | 0x00 | ok BP0 PG | 0x00 | ok BP1 PG | 0x00 | ok 1.8V SW PG | 0x00 | ok 2.5V SW PG | 0x00 | ok 5V SW PG | 0x00 | ok PVNN SW PG | 0x00 | ok VSB11 SW PG | 0x00 | ok VSBM SW PG | 0x00 | ok 3.3V B PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok Fan1A | 8280 RPM | ok Fan1B | 7680 RPM | ok Fan2A | 8280 RPM | ok Fan2B | 7680 RPM | ok Fan3A | 8280 RPM | ok Fan3B | 7800 RPM | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Intrusion Cable | 0x00 | ok VGA Cable Pres | 0x00 | ok Presence | 0x00 | ok BP0 Presence | 0x00 | ok BP1 Presence | 0x00 | ok Power Cable | Not Readable | ns Signal Cable | Not Readable | ns Power JBP1 | 0x00 | ok Signal Cable | 0x00 | ok Power JBP2 | Not Readable | ns Presence | 0x00 | ok Presence | 0x00 | ok Current 1 | 0.40 Amps | ok Current 2 | 0.40 Amps | ok Voltage 1 | 204 Volts | ok Voltage 2 | 204 Volts | ok Riser Config Err | 0x00 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok Power Optimized | 0x00 | ok Pwr Consumption | 144 Watts | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x00 | ok Redundancy | Not Readable | ns SD1 | Not Readable | ns SD2 | Not Readable | ns SD | Not Readable | ns IO Usage | 0 percent | ok MEM Usage | 3 percent | ok SYS Usage | 3 percent | ok CPU Usage | 1 percent | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok CMOS Battery | 0x00 | ok ROMB Battery | Not Readable | ns PCIe Slot1 | 0x00 | ok PCIe Slot2 | Not Readable | ns PCIe Slot3 | Not Readable | ns Drive 0 | 0x00 | ok Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns Cable PCIe A1 | Not Readable | ns Cable PCIe B1 | Not Readable | ns Cable PCIe A2 | Not Readable | ns Cable PCIe B2 | Not Readable | ns Cable SAS A0 | 0x00 | ok Cable SAS B0 | 0x00 | ok Cable SAS A1 | Not Readable | ns Cable SAS B1 | Not Readable | ns Cable SAS A2 | Not Readable | ns Cable SAS B2 | Not Readable | ns Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns ECC Corr Err | 0xa6 | ok ECC Uncorr Err | 0xa3 | ok PCI Parity Err | Not Readable | ns PCI System Err | 0x9e | ok SBE Log Disabled | 0xa5 | ok Unknown | 0x00 | ok CPU Machine Chk | 0x00 | ok Memory Spared | 0x00 | ok Memory Mirrored | 0x00 | ok PCIE Fatal Err | 0xb2 | ok Chipset Err | Not Readable | ns Err Reg Pointer | 0x7a | ok Mem ECC Warning | 0x7a | ok POST Err | Not Readable | ns Hdwr version err | Not Readable | ns Non Fatal PCI Er | 0x00 | ok Fatal IO Error | 0x00 | ok MSR Info Log | 0x00 | ok TXT Status | 0x00 | ok iDPT Mem Fail | 0x00 | ok Additional Info | 0x00 | ok CPU TDP | 0x00 | ok QPIRC Warning | 0x00 | ok QPIRC Warning | 0x00 | ok Link Warning | 0x00 | ok Link Warning | 0x00 | ok Link Error | 0x00 | ok MRC Warning | 0x00 | ok MRC Warning | 0x00 | ok Chassis Mismatch | 0x00 | ok FatalPCIErrOnBus | 0x45 | ok NonFatalPCIErBus | 0x45 | ok Fatal PCI SSD Er | 0x45 | ok NonFatalSSDEr | 0x45 | ok CPUMachineCheck | 0x45 | ok FatalPCIErARI | 0x45 | ok NonFatalPCIErARI | 0x45 | ok FatalPCIExpEr | 0x45 | ok NonFatalPCIExpEr | 0x40 | ok Cable SAS A0 | Not Readable | ns Cable SAS B0 | Not Readable | ns Fan4A | 8280 RPM | ok Fan4B | 7680 RPM | ok Fan5A | 8280 RPM | ok Fan5B | 7680 RPM | ok Fan6A | 8280 RPM | ok Fan6B | 7920 RPM | ok Fan7A | 8280 RPM | ok Fan7B | 7800 RPM | ok Fan8A | 8280 RPM | ok Fan8B | 7800 RPM | ok Unresp sensor | 0x00 | ok CP Left Pres | 0x00 | ok CP Right Pres | 0x00 | ok 3.3V A PG | 0x00 | ok VSA PG | 0x00 | ok VSA PG | 0x00 | ok TPM Presence | 0x00 | ok Riser 1 Presence | 0x00 | ok Riser 2 Presence | 0x00 | ok Front LED Panel | 0x00 | ok OS Watchdog Time | 0x00 | ok Fan1A Status | 0x00 | ok Fan1B Status | 0x00 | ok Fan2A Status | 0x00 | ok Fan2B Status | 0x00 | ok Fan3A Status | 0x00 | ok Fan3B Status | 0x00 | ok Fan4A Status | 0x00 | ok Fan4B Status | 0x00 | ok Fan5A Status | 0x00 | ok Fan5B Status | 0x00 | ok Fan6A Status | 0x00 | ok Fan6B Status | 0x00 | ok Fan7A Status | 0x00 | ok Fan7B Status | 0x00 | ok Fan8A Status | 0x00 | ok Fan8B Status | 0x00 | ok NVDIMM Warning | 0x41 | ok NVDIMM Error | 0x41 | ok NVDIMM Info | 0x00 | ok Dedicated NIC | 0x00 | ok Presence | 0x00 | ok NVDIMM Battery | Not Readable | ns Exhaust Temp | 37 degrees C | ok LT/Flex Addr | 0x00 | ok QPI Link Err | 0x00 | ok TPM Presence | 0x40 | ok CPU Link Info | 0x41 | ok Chipset Info | 0x40 | ok Memory Config | 0x40 | ok POST Pkg Repair | 0x42 | ok Pfault Fail Safe | Not Readable | ns BP2 PG | 0x00 | ok MMIOChipset Info | 0x00 | ok DIMM Media Info | 0x00 | ok DIMMThermal Info | 0x00 | ok CPU Internal Err | 0x00 | ok GPU1 Temp | disabled | ns GPU2 Temp | disabled | ns GPU3 Temp | disabled | ns A1 | 0x00 | ok A2 | 0x00 | ok A3 | 0x00 | ok A4 | 0x00 | ok A5 | 0x00 | ok A6 | 0x00 | ok A7 | 0x00 | ok A8 | 0x00 | ok A9 | 0x00 | ok A10 | 0x00 | ok A11 | 0x00 | ok A12 | 0x00 | ok B1 | 0x00 | ok B2 | 0x00 | ok B3 | 0x00 | ok B4 | 0x00 | ok B5 | 0x00 | ok B6 | 0x00 | ok B7 | 0x00 | ok B8 | 0x00 | ok B9 | 0x00 | ok B10 | 0x00 | ok B11 | 0x00 | ok B12 | 0x00 | ok Therm Config Err | 0x00 | ok VCORE VR | 1.78 Volts | ok VCORE VR | 1.78 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok :: [ 14:15:42 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:15:42 ] :: [ INFO ] :: Loop 0 Complete :: [ 14:15:42 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 14:15:42 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:15:42 ] :: [ BEGIN ] :: Running 'ipmitool sel list' 1 | 01/25/2023 | 09:15:42 AM EST | Event Logging Disabled #0x72 | Log area reset/cleared | Asserted :: [ 14:15:42 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 4c4c4544-0042-3910-8039-c6c04f544833 GUID Encoding : SMBIOS (WARNING: IPMI Specification violation!) GUID Version : Name-based using MD5 :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : command Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Sleep Button Disable : not allowed Diag Button Disable : not allowed Reset Button Disable : not allowed Power Button Disable : allowed Sleep Button Disabled: false Diag Button Disabled : false Reset Button Disabled: false Power Button Disabled: false :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:15:43 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Loading IANA PEN Registry... Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : Temp (0x1) Entity ID : 3.1 Sensor Type (Threshold) : Temperature Sensor Reading : 38 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Temp (0x2) Entity ID : 3.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Inlet Temp (0x5) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : -7.000 Lower Non-Critical : 3.000 Upper Non-Critical : 43.000 Upper Critical : 47.000 Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : lnc- lcr- unc+ ucr+ Deassertions Enabled : lnc- lcr- unc+ ucr+ Sensor ID : DIMM PG (0x7) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : NDC PG (0x8) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS1 PG FAIL (0x9) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS2 PG FAIL (0xa) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP0 PG (0xb) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP1 PG (0xc) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 1.8V SW PG (0xe) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 2.5V SW PG (0xf) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 5V SW PG (0x10) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PVNN SW PG (0x11) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSB11 SW PG (0x12) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSBM SW PG (0x13) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 3.3V B PG (0x15) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x24) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x25) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x26) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x27) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x28) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x29) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x2a) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x2b) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x2c) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x2e) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x2f) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x30) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x31) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x32) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x33) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x34) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x35) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x36) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : Fan1A (0x38) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan1B (0x40) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2A (0x39) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2B (0x41) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3A (0x3a) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3B (0x42) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Presence (0x48) Entity ID : 10.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x49) Entity ID : 10.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4a) Entity ID : 11.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4b) Entity ID : 11.3 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Intrusion Cable (0x51) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : VGA Cable Pres (0x52) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Presence (0x58) Entity ID : 11.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : BP0 Presence (0x59) Entity ID : 26.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : BP1 Presence (0x5a) Entity ID : 26.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Power Cable (0x5c) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Signal Cable (0x5d) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Power JBP1 (0x5e) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Signal Cable (0x5f) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Power JBP2 (0x60) Entity ID : 26.3 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Presence (0x66) Entity ID : 3.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x67) Entity ID : 3.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Current 1 (0x6b) Entity ID : 10.1 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Current 2 (0x6c) Entity ID : 10.2 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 1 (0x6d) Entity ID : 10.1 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 2 (0x6e) Entity ID : 10.2 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Riser Config Err (0x6f) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : OS Watchdog (0x71) Entity ID : 7.1 Sensor Type (Discrete): Watchdog2 Sensor ID : SEL (0x72) Entity ID : 0.1 Sensor Type (Discrete): Event Logging Disabled Unable to read sensor: Device Not Present Sensor ID : Intrusion (0x73) Entity ID : 7.1 Sensor Type (Discrete): Physical Security Sensor ID : Power Optimized (0x75) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Pwr Consumption (0x76) Entity ID : 7.1 Sensor Type (Threshold) : Current Sensor Reading : 144 (+/- 0) Watts Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 1632.000 Upper Critical : 1800.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertion Events : Assertions Enabled : unc+ ucr+ Deassertions Enabled : unc+ ucr+ Sensor ID : PS Redundancy (0x77) Entity ID : 7.1 Sensor Type (Discrete): Power Supply Unable to read sensor: Device Not Present Sensor ID : Fan Redundancy (0x78) Entity ID : 7.1 Sensor Type (Discrete): Fan States Asserted : Fan [Fully Redundant] Sensor ID : Redundancy (0x79) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD1 (0x7a) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD2 (0x7b) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD (0x7c) Entity ID : 11.4 Sensor Type (Discrete): Module / Board Unable to read sensor: Device Not Present Sensor ID : IO Usage (0x7d) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 0 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : MEM Usage (0x7e) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : SYS Usage (0x7f) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : CPU Usage (0x80) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 1 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : Status (0x81) Entity ID : 3.1 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x82) Entity ID : 3.2 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x85) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : Status (0x86) Entity ID : 10.2 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : CMOS Battery (0x87) Entity ID : 7.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : ROMB Battery (0x88) Entity ID : 11.2 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : PCIe Slot1 (0x8b) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Sensor ID : PCIe Slot2 (0x8c) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCIe Slot3 (0x8d) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Drive 0 (0x98) Entity ID : 7.1 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : Cable PCIe A0 (0xba) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xbb) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A1 (0xbc) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B1 (0xbd) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A2 (0xbe) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B2 (0xbf) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A0 (0xc0) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS B0 (0xc1) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS A1 (0xc2) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B1 (0xc3) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A2 (0xc4) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B2 (0xc5) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A0 (0xc8) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xc9) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : ECC Corr Err (0x1) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : ECC Uncorr Err (0x2) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : PCI Parity Err (0x4) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCI System Err (0x5) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : SBE Log Disabled (0x6) Entity ID : 34.1 Sensor Type (Discrete): Event Logging Disabled States Asserted : Event Logging Disabled Sensor ID : Unknown (0x8) Entity ID : 34.1 Sensor Type (Discrete): System Event States Asserted : System Event [System Reconfigured] Sensor ID : CPU Machine Chk (0xd) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [Transition to OK] Sensor ID : Memory Spared (0x11) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : Memory Mirrored (0x12) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : PCIE Fatal Err (0x18) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : Chipset Err (0x19) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Err Reg Pointer (0x1a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Mem ECC Warning (0x1b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Transition to Non-recoverable] [Monitor] Sensor ID : POST Err (0x1e) Entity ID : 34.1 Sensor Type (Discrete): System Firmwares Unable to read sensor: Device Not Present Sensor ID : Hdwr version err (0x1f) Entity ID : 34.1 Sensor Type (Discrete): Version Change Unable to read sensor: Device Not Present Sensor ID : Non Fatal PCI Er (0x26) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal IO Error (0x27) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MSR Info Log (0x28) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TXT Status (0x2a) Entity ID : 34.1 Sensor Type (Discrete): OS Critical Stop States Asserted : OS Critical Stop [Error during system startup] Sensor ID : iDPT Mem Fail (0x2b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Correctable ECC] Sensor ID : Additional Info (0x2e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU TDP (0x2f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x30) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x31) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x32) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x33) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Error (0x34) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x35) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x36) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chassis Mismatch (0x37) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change detected] Sensor ID : FatalPCIErrOnBus (0x38) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErBus (0x39) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal PCI SSD Er (0x3a) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalSSDEr (0x3b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPUMachineCheck (0x3c) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [SM BIOS Uncorrectable CPU-complex Error] [Presence detected] Sensor ID : FatalPCIErARI (0x3d) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErARI (0x3e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : FatalPCIExpEr (0x3f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NonFatalPCIExpEr (0x40) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Cable SAS A0 (0xc6) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B0 (0xc7) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Fan4A (0x3b) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan4B (0x43) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5A (0x3c) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5B (0x44) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6A (0x3d) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6B (0x45) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7920 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7A (0x3e) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7B (0x46) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8A (0x3f) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8B (0x47) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Unresp sensor (0xfe) Entity ID : 7.1 Sensor Type (Discrete): Other Sensor ID : CP Left Pres (0x56) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : CP Right Pres (0x57) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : 3.3V A PG (0x14) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x2d) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x37) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : TPM Presence (0x54) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Riser 1 Presence (0x4d) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Riser 2 Presence (0x4e) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Front LED Panel (0x23) Entity ID : 7.1 Sensor Type (Discrete): Management Subsys Health Sensor ID : OS Watchdog Time (0x23) Entity ID : 34.1 Sensor Type (Discrete): Watchdog2 Sensor ID : Fan1A Status (0xe2) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan1B Status (0xe3) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2A Status (0xe4) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2B Status (0xe5) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3A Status (0xe6) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3B Status (0xe7) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4A Status (0xe8) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4B Status (0xe9) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5A Status (0xea) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5B Status (0xeb) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6A Status (0xec) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6B Status (0xed) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7A Status (0xee) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7B Status (0xef) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8A Status (0xf0) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8B Status (0xf1) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Warning (0x46) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Error (0x47) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Info (0x48) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Dedicated NIC (0x70) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4c) Entity ID : 11.4 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : NVDIMM Battery (0x6a) Entity ID : 7.1 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : Exhaust Temp (0x6) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 37 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : 8.000 Upper Non-Critical : 75.000 Upper Critical : 80.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : Sensor ID : LT/Flex Addr (0x25) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPI Link Err (0x29) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TPM Presence (0x41) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change success] Sensor ID : CPU Link Info (0x42) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chipset Info (0x43) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Memory Config (0x44) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : POST Pkg Repair (0x45) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Redundancy Degraded from Fully Redundant] [Redundancy Degraded from Non-Redundant] Sensor ID : Pfault Fail Safe (0x74) Entity ID : 7.1 Sensor Type (Discrete): Voltage Unable to read sensor: Device Not Present Sensor ID : BP2 PG (0xd) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MMIOChipset Info (0x49) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMM Media Info (0x4a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMMThermal Info (0x4b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU Internal Err (0x9) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [IERR] Sensor ID : GPU1 Temp (0x89) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU2 Temp (0x8a) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU3 Temp (0x62) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : A1 (0xca) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : A2 (0xcb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A3 (0xcc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A4 (0xcd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A5 (0xce) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A6 (0xcf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A7 (0xd0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A8 (0xd1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A9 (0xd2) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A10 (0xd3) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A11 (0xd4) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A12 (0xd5) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B1 (0xd6) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : B2 (0xd7) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B3 (0xd8) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B4 (0xd9) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B5 (0xda) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B6 (0xdb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B7 (0xdc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B8 (0xdd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B9 (0xde) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B10 (0xdf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B11 (0xe0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B12 (0xe1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : Therm Config Err (0xfa) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : VCORE VR (0x17) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : VCORE VR (0x18) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1a) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1b) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1c) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1d) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : :: [ 14:15:49 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:15:49 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 32 Device Revision : 1 Firmware Revision : 5.00 IPMI Version : 2.0 Manufacturer ID : 674 Manufacturer Name : Dell Inc. Product ID : 256 (0x0100) Product Name : Unknown (0x100) Device Available : yes Provides Device SDRs : yes Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver Bridge Chassis Device Aux Firmware Rev Info : 0x00 0x01 0x0a 0x14 :: [ 14:15:49 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:15:49 ] :: [ BEGIN ] :: Running 'ipmitool sdr' Temp | 38 degrees C | ok Temp | 35 degrees C | ok Inlet Temp | 30 degrees C | ok DIMM PG | 0x00 | ok NDC PG | 0x00 | ok PS1 PG FAIL | 0x00 | ok PS2 PG FAIL | 0x00 | ok BP0 PG | 0x00 | ok BP1 PG | 0x00 | ok 1.8V SW PG | 0x00 | ok 2.5V SW PG | 0x00 | ok 5V SW PG | 0x00 | ok PVNN SW PG | 0x00 | ok VSB11 SW PG | 0x00 | ok VSBM SW PG | 0x00 | ok 3.3V B PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok Fan1A | 8280 RPM | ok Fan1B | 7680 RPM | ok Fan2A | 8280 RPM | ok Fan2B | 7680 RPM | ok Fan3A | 8280 RPM | ok Fan3B | 7800 RPM | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Intrusion Cable | 0x00 | ok VGA Cable Pres | 0x00 | ok Presence | 0x00 | ok BP0 Presence | 0x00 | ok BP1 Presence | 0x00 | ok Power Cable | Not Readable | ns Signal Cable | Not Readable | ns Power JBP1 | 0x00 | ok Signal Cable | 0x00 | ok Power JBP2 | Not Readable | ns Presence | 0x00 | ok Presence | 0x00 | ok Current 1 | 0.40 Amps | ok Current 2 | 0.40 Amps | ok Voltage 1 | 204 Volts | ok Voltage 2 | 204 Volts | ok Riser Config Err | 0x00 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok Power Optimized | 0x00 | ok Pwr Consumption | 144 Watts | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x00 | ok Redundancy | Not Readable | ns SD1 | Not Readable | ns SD2 | Not Readable | ns SD | Not Readable | ns IO Usage | 0 percent | ok MEM Usage | 3 percent | ok SYS Usage | 3 percent | ok CPU Usage | 1 percent | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok CMOS Battery | 0x00 | ok ROMB Battery | Not Readable | ns PCIe Slot1 | 0x00 | ok PCIe Slot2 | Not Readable | ns PCIe Slot3 | Not Readable | ns Drive 0 | 0x00 | ok Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns Cable PCIe A1 | Not Readable | ns Cable PCIe B1 | Not Readable | ns Cable PCIe A2 | Not Readable | ns Cable PCIe B2 | Not Readable | ns Cable SAS A0 | 0x00 | ok Cable SAS B0 | 0x00 | ok Cable SAS A1 | Not Readable | ns Cable SAS B1 | Not Readable | ns Cable SAS A2 | Not Readable | ns Cable SAS B2 | Not Readable | ns Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns ECC Corr Err | 0xa6 | ok ECC Uncorr Err | 0xa3 | ok PCI Parity Err | Not Readable | ns PCI System Err | 0x9e | ok SBE Log Disabled | 0xa5 | ok Unknown | 0x00 | ok CPU Machine Chk | 0x00 | ok Memory Spared | 0x00 | ok Memory Mirrored | 0x00 | ok PCIE Fatal Err | 0xb2 | ok Chipset Err | Not Readable | ns Err Reg Pointer | 0x7a | ok Mem ECC Warning | 0x7a | ok POST Err | Not Readable | ns Hdwr version err | Not Readable | ns Non Fatal PCI Er | 0x00 | ok Fatal IO Error | 0x00 | ok MSR Info Log | 0x00 | ok TXT Status | 0x00 | ok iDPT Mem Fail | 0x00 | ok Additional Info | 0x00 | ok CPU TDP | 0x00 | ok QPIRC Warning | 0x00 | ok QPIRC Warning | 0x00 | ok Link Warning | 0x00 | ok Link Warning | 0x00 | ok Link Error | 0x00 | ok MRC Warning | 0x00 | ok MRC Warning | 0x00 | ok Chassis Mismatch | 0x00 | ok FatalPCIErrOnBus | 0x45 | ok NonFatalPCIErBus | 0x45 | ok Fatal PCI SSD Er | 0x45 | ok NonFatalSSDEr | 0x45 | ok CPUMachineCheck | 0x45 | ok FatalPCIErARI | 0x45 | ok NonFatalPCIErARI | 0x45 | ok FatalPCIExpEr | 0x45 | ok NonFatalPCIExpEr | 0x40 | ok Cable SAS A0 | Not Readable | ns Cable SAS B0 | Not Readable | ns Fan4A | 8280 RPM | ok Fan4B | 7680 RPM | ok Fan5A | 8280 RPM | ok Fan5B | 7680 RPM | ok Fan6A | 8280 RPM | ok Fan6B | 7920 RPM | ok Fan7A | 8280 RPM | ok Fan7B | 7800 RPM | ok Fan8A | 8280 RPM | ok Fan8B | 7800 RPM | ok Unresp sensor | 0x00 | ok CP Left Pres | 0x00 | ok CP Right Pres | 0x00 | ok 3.3V A PG | 0x00 | ok VSA PG | 0x00 | ok VSA PG | 0x00 | ok TPM Presence | 0x00 | ok Riser 1 Presence | 0x00 | ok Riser 2 Presence | 0x00 | ok Front LED Panel | 0x00 | ok OS Watchdog Time | 0x00 | ok Fan1A Status | 0x00 | ok Fan1B Status | 0x00 | ok Fan2A Status | 0x00 | ok Fan2B Status | 0x00 | ok Fan3A Status | 0x00 | ok Fan3B Status | 0x00 | ok Fan4A Status | 0x00 | ok Fan4B Status | 0x00 | ok Fan5A Status | 0x00 | ok Fan5B Status | 0x00 | ok Fan6A Status | 0x00 | ok Fan6B Status | 0x00 | ok Fan7A Status | 0x00 | ok Fan7B Status | 0x00 | ok Fan8A Status | 0x00 | ok Fan8B Status | 0x00 | ok NVDIMM Warning | 0x41 | ok NVDIMM Error | 0x41 | ok NVDIMM Info | 0x00 | ok Dedicated NIC | 0x00 | ok Presence | 0x00 | ok NVDIMM Battery | Not Readable | ns Exhaust Temp | 37 degrees C | ok LT/Flex Addr | 0x00 | ok QPI Link Err | 0x00 | ok TPM Presence | 0x40 | ok CPU Link Info | 0x41 | ok Chipset Info | 0x40 | ok Memory Config | 0x40 | ok POST Pkg Repair | 0x42 | ok Pfault Fail Safe | Not Readable | ns BP2 PG | 0x00 | ok MMIOChipset Info | 0x00 | ok DIMM Media Info | 0x00 | ok DIMMThermal Info | 0x00 | ok CPU Internal Err | 0x00 | ok GPU1 Temp | disabled | ns GPU2 Temp | disabled | ns GPU3 Temp | disabled | ns A1 | 0x00 | ok A2 | 0x00 | ok A3 | 0x00 | ok A4 | 0x00 | ok A5 | 0x00 | ok A6 | 0x00 | ok A7 | 0x00 | ok A8 | 0x00 | ok A9 | 0x00 | ok A10 | 0x00 | ok A11 | 0x00 | ok A12 | 0x00 | ok B1 | 0x00 | ok B2 | 0x00 | ok B3 | 0x00 | ok B4 | 0x00 | ok B5 | 0x00 | ok B6 | 0x00 | ok B7 | 0x00 | ok B8 | 0x00 | ok B9 | 0x00 | ok B10 | 0x00 | ok B11 | 0x00 | ok B12 | 0x00 | ok Therm Config Err | 0x00 | ok VCORE VR | 1.78 Volts | ok VCORE VR | 1.78 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok :: [ 14:15:54 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:15:54 ] :: [ INFO ] :: Loop 1 Complete :: [ 14:15:54 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 14:15:54 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:15:54 ] :: [ BEGIN ] :: Running 'ipmitool sel list' 1 | 01/25/2023 | 09:15:53 AM EST | Event Logging Disabled #0x72 | Log area reset/cleared | Asserted :: [ 14:15:54 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:15:54 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 14:15:54 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:15:54 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:15:55 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:15:55 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 4c4c4544-0042-3910-8039-c6c04f544833 GUID Encoding : SMBIOS (WARNING: IPMI Specification violation!) GUID Version : Name-based using MD5 :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:15:55 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:15:55 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : command Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Sleep Button Disable : not allowed Diag Button Disable : not allowed Reset Button Disable : not allowed Power Button Disable : allowed Sleep Button Disabled: false Diag Button Disabled : false Reset Button Disabled: false Power Button Disabled: false :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:15:55 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:15:55 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:15:55 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Loading IANA PEN Registry... Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : Temp (0x1) Entity ID : 3.1 Sensor Type (Threshold) : Temperature Sensor Reading : 38 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Temp (0x2) Entity ID : 3.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Inlet Temp (0x5) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : -7.000 Lower Non-Critical : 3.000 Upper Non-Critical : 43.000 Upper Critical : 47.000 Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : lnc- lcr- unc+ ucr+ Deassertions Enabled : lnc- lcr- unc+ ucr+ Sensor ID : DIMM PG (0x7) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : NDC PG (0x8) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS1 PG FAIL (0x9) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS2 PG FAIL (0xa) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP0 PG (0xb) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP1 PG (0xc) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 1.8V SW PG (0xe) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 2.5V SW PG (0xf) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 5V SW PG (0x10) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PVNN SW PG (0x11) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSB11 SW PG (0x12) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSBM SW PG (0x13) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 3.3V B PG (0x15) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x24) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x25) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x26) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x27) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x28) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x29) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x2a) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x2b) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x2c) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x2e) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x2f) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x30) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x31) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x32) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x33) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x34) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x35) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x36) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : Fan1A (0x38) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan1B (0x40) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2A (0x39) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2B (0x41) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3A (0x3a) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3B (0x42) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Presence (0x48) Entity ID : 10.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x49) Entity ID : 10.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4a) Entity ID : 11.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4b) Entity ID : 11.3 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Intrusion Cable (0x51) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : VGA Cable Pres (0x52) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Presence (0x58) Entity ID : 11.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : BP0 Presence (0x59) Entity ID : 26.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : BP1 Presence (0x5a) Entity ID : 26.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Power Cable (0x5c) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Signal Cable (0x5d) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Power JBP1 (0x5e) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Signal Cable (0x5f) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Power JBP2 (0x60) Entity ID : 26.3 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Presence (0x66) Entity ID : 3.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x67) Entity ID : 3.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Current 1 (0x6b) Entity ID : 10.1 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Current 2 (0x6c) Entity ID : 10.2 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 1 (0x6d) Entity ID : 10.1 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 2 (0x6e) Entity ID : 10.2 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Riser Config Err (0x6f) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : OS Watchdog (0x71) Entity ID : 7.1 Sensor Type (Discrete): Watchdog2 Sensor ID : SEL (0x72) Entity ID : 0.1 Sensor Type (Discrete): Event Logging Disabled Unable to read sensor: Device Not Present Sensor ID : Intrusion (0x73) Entity ID : 7.1 Sensor Type (Discrete): Physical Security Sensor ID : Power Optimized (0x75) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Pwr Consumption (0x76) Entity ID : 7.1 Sensor Type (Threshold) : Current Sensor Reading : 144 (+/- 0) Watts Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 1632.000 Upper Critical : 1800.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertion Events : Assertions Enabled : unc+ ucr+ Deassertions Enabled : unc+ ucr+ Sensor ID : PS Redundancy (0x77) Entity ID : 7.1 Sensor Type (Discrete): Power Supply Unable to read sensor: Device Not Present Sensor ID : Fan Redundancy (0x78) Entity ID : 7.1 Sensor Type (Discrete): Fan States Asserted : Fan [Fully Redundant] Sensor ID : Redundancy (0x79) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD1 (0x7a) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD2 (0x7b) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD (0x7c) Entity ID : 11.4 Sensor Type (Discrete): Module / Board Unable to read sensor: Device Not Present Sensor ID : IO Usage (0x7d) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 0 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : MEM Usage (0x7e) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : SYS Usage (0x7f) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : CPU Usage (0x80) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 1 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : Status (0x81) Entity ID : 3.1 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x82) Entity ID : 3.2 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x85) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : Status (0x86) Entity ID : 10.2 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : CMOS Battery (0x87) Entity ID : 7.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : ROMB Battery (0x88) Entity ID : 11.2 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : PCIe Slot1 (0x8b) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Sensor ID : PCIe Slot2 (0x8c) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCIe Slot3 (0x8d) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Drive 0 (0x98) Entity ID : 7.1 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : Cable PCIe A0 (0xba) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xbb) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A1 (0xbc) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B1 (0xbd) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A2 (0xbe) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B2 (0xbf) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A0 (0xc0) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS B0 (0xc1) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS A1 (0xc2) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B1 (0xc3) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A2 (0xc4) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B2 (0xc5) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A0 (0xc8) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xc9) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : ECC Corr Err (0x1) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : ECC Uncorr Err (0x2) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : PCI Parity Err (0x4) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCI System Err (0x5) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : SBE Log Disabled (0x6) Entity ID : 34.1 Sensor Type (Discrete): Event Logging Disabled States Asserted : Event Logging Disabled Sensor ID : Unknown (0x8) Entity ID : 34.1 Sensor Type (Discrete): System Event States Asserted : System Event [System Reconfigured] Sensor ID : CPU Machine Chk (0xd) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [Transition to OK] Sensor ID : Memory Spared (0x11) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : Memory Mirrored (0x12) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : PCIE Fatal Err (0x18) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : Chipset Err (0x19) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Err Reg Pointer (0x1a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Mem ECC Warning (0x1b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Transition to Non-recoverable] [Monitor] Sensor ID : POST Err (0x1e) Entity ID : 34.1 Sensor Type (Discrete): System Firmwares Unable to read sensor: Device Not Present Sensor ID : Hdwr version err (0x1f) Entity ID : 34.1 Sensor Type (Discrete): Version Change Unable to read sensor: Device Not Present Sensor ID : Non Fatal PCI Er (0x26) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal IO Error (0x27) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MSR Info Log (0x28) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TXT Status (0x2a) Entity ID : 34.1 Sensor Type (Discrete): OS Critical Stop States Asserted : OS Critical Stop [Error during system startup] Sensor ID : iDPT Mem Fail (0x2b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Correctable ECC] Sensor ID : Additional Info (0x2e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU TDP (0x2f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x30) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x31) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x32) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x33) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Error (0x34) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x35) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x36) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chassis Mismatch (0x37) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change detected] Sensor ID : FatalPCIErrOnBus (0x38) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErBus (0x39) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal PCI SSD Er (0x3a) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalSSDEr (0x3b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPUMachineCheck (0x3c) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [SM BIOS Uncorrectable CPU-complex Error] [Presence detected] Sensor ID : FatalPCIErARI (0x3d) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErARI (0x3e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : FatalPCIExpEr (0x3f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NonFatalPCIExpEr (0x40) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Cable SAS A0 (0xc6) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B0 (0xc7) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Fan4A (0x3b) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan4B (0x43) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5A (0x3c) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5B (0x44) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6A (0x3d) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6B (0x45) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7920 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7A (0x3e) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7B (0x46) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8A (0x3f) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8B (0x47) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Unresp sensor (0xfe) Entity ID : 7.1 Sensor Type (Discrete): Other Sensor ID : CP Left Pres (0x56) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : CP Right Pres (0x57) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : 3.3V A PG (0x14) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x2d) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x37) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : TPM Presence (0x54) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Riser 1 Presence (0x4d) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Riser 2 Presence (0x4e) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Front LED Panel (0x23) Entity ID : 7.1 Sensor Type (Discrete): Management Subsys Health Sensor ID : OS Watchdog Time (0x23) Entity ID : 34.1 Sensor Type (Discrete): Watchdog2 Sensor ID : Fan1A Status (0xe2) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan1B Status (0xe3) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2A Status (0xe4) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2B Status (0xe5) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3A Status (0xe6) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3B Status (0xe7) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4A Status (0xe8) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4B Status (0xe9) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5A Status (0xea) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5B Status (0xeb) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6A Status (0xec) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6B Status (0xed) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7A Status (0xee) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7B Status (0xef) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8A Status (0xf0) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8B Status (0xf1) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Warning (0x46) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Error (0x47) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Info (0x48) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Dedicated NIC (0x70) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4c) Entity ID : 11.4 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : NVDIMM Battery (0x6a) Entity ID : 7.1 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : Exhaust Temp (0x6) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 37 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : 8.000 Upper Non-Critical : 75.000 Upper Critical : 80.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : Sensor ID : LT/Flex Addr (0x25) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPI Link Err (0x29) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TPM Presence (0x41) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change success] Sensor ID : CPU Link Info (0x42) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chipset Info (0x43) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Memory Config (0x44) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : POST Pkg Repair (0x45) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Redundancy Degraded from Fully Redundant] [Redundancy Degraded from Non-Redundant] Sensor ID : Pfault Fail Safe (0x74) Entity ID : 7.1 Sensor Type (Discrete): Voltage Unable to read sensor: Device Not Present Sensor ID : BP2 PG (0xd) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MMIOChipset Info (0x49) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMM Media Info (0x4a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMMThermal Info (0x4b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU Internal Err (0x9) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [IERR] Sensor ID : GPU1 Temp (0x89) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU2 Temp (0x8a) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU3 Temp (0x62) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : A1 (0xca) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : A2 (0xcb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A3 (0xcc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A4 (0xcd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A5 (0xce) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A6 (0xcf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A7 (0xd0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A8 (0xd1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A9 (0xd2) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A10 (0xd3) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A11 (0xd4) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A12 (0xd5) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B1 (0xd6) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : B2 (0xd7) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B3 (0xd8) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B4 (0xd9) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B5 (0xda) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B6 (0xdb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B7 (0xdc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B8 (0xdd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B9 (0xde) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B10 (0xdf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B11 (0xe0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B12 (0xe1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : Therm Config Err (0xfa) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : VCORE VR (0x17) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : VCORE VR (0x18) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1a) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1b) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1c) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1d) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : :: [ 14:16:01 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:16:01 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 32 Device Revision : 1 Firmware Revision : 5.00 IPMI Version : 2.0 Manufacturer ID : 674 Manufacturer Name : Dell Inc. Product ID : 256 (0x0100) Product Name : Unknown (0x100) Device Available : yes Provides Device SDRs : yes Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver Bridge Chassis Device Aux Firmware Rev Info : 0x00 0x01 0x0a 0x14 :: [ 14:16:01 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:16:01 ] :: [ BEGIN ] :: Running 'ipmitool sdr' Temp | 38 degrees C | ok Temp | 35 degrees C | ok Inlet Temp | 30 degrees C | ok DIMM PG | 0x00 | ok NDC PG | 0x00 | ok PS1 PG FAIL | 0x00 | ok PS2 PG FAIL | 0x00 | ok BP0 PG | 0x00 | ok BP1 PG | 0x00 | ok 1.8V SW PG | 0x00 | ok 2.5V SW PG | 0x00 | ok 5V SW PG | 0x00 | ok PVNN SW PG | 0x00 | ok VSB11 SW PG | 0x00 | ok VSBM SW PG | 0x00 | ok 3.3V B PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok Fan1A | 8280 RPM | ok Fan1B | 7680 RPM | ok Fan2A | 8280 RPM | ok Fan2B | 7680 RPM | ok Fan3A | 8280 RPM | ok Fan3B | 7800 RPM | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Intrusion Cable | 0x00 | ok VGA Cable Pres | 0x00 | ok Presence | 0x00 | ok BP0 Presence | 0x00 | ok BP1 Presence | 0x00 | ok Power Cable | Not Readable | ns Signal Cable | Not Readable | ns Power JBP1 | 0x00 | ok Signal Cable | 0x00 | ok Power JBP2 | Not Readable | ns Presence | 0x00 | ok Presence | 0x00 | ok Current 1 | 0.40 Amps | ok Current 2 | 0.40 Amps | ok Voltage 1 | 204 Volts | ok Voltage 2 | 204 Volts | ok Riser Config Err | 0x00 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok Power Optimized | 0x00 | ok Pwr Consumption | 144 Watts | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x00 | ok Redundancy | Not Readable | ns SD1 | Not Readable | ns SD2 | Not Readable | ns SD | Not Readable | ns IO Usage | 0 percent | ok MEM Usage | 3 percent | ok SYS Usage | 3 percent | ok CPU Usage | 1 percent | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok CMOS Battery | 0x00 | ok ROMB Battery | Not Readable | ns PCIe Slot1 | 0x00 | ok PCIe Slot2 | Not Readable | ns PCIe Slot3 | Not Readable | ns Drive 0 | 0x00 | ok Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns Cable PCIe A1 | Not Readable | ns Cable PCIe B1 | Not Readable | ns Cable PCIe A2 | Not Readable | ns Cable PCIe B2 | Not Readable | ns Cable SAS A0 | 0x00 | ok Cable SAS B0 | 0x00 | ok Cable SAS A1 | Not Readable | ns Cable SAS B1 | Not Readable | ns Cable SAS A2 | Not Readable | ns Cable SAS B2 | Not Readable | ns Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns ECC Corr Err | 0xa6 | ok ECC Uncorr Err | 0xa3 | ok PCI Parity Err | Not Readable | ns PCI System Err | 0x9e | ok SBE Log Disabled | 0xa5 | ok Unknown | 0x00 | ok CPU Machine Chk | 0x00 | ok Memory Spared | 0x00 | ok Memory Mirrored | 0x00 | ok PCIE Fatal Err | 0xb2 | ok Chipset Err | Not Readable | ns Err Reg Pointer | 0x7a | ok Mem ECC Warning | 0x7a | ok POST Err | Not Readable | ns Hdwr version err | Not Readable | ns Non Fatal PCI Er | 0x00 | ok Fatal IO Error | 0x00 | ok MSR Info Log | 0x00 | ok TXT Status | 0x00 | ok iDPT Mem Fail | 0x00 | ok Additional Info | 0x00 | ok CPU TDP | 0x00 | ok QPIRC Warning | 0x00 | ok QPIRC Warning | 0x00 | ok Link Warning | 0x00 | ok Link Warning | 0x00 | ok Link Error | 0x00 | ok MRC Warning | 0x00 | ok MRC Warning | 0x00 | ok Chassis Mismatch | 0x00 | ok FatalPCIErrOnBus | 0x45 | ok NonFatalPCIErBus | 0x45 | ok Fatal PCI SSD Er | 0x45 | ok NonFatalSSDEr | 0x45 | ok CPUMachineCheck | 0x45 | ok FatalPCIErARI | 0x45 | ok NonFatalPCIErARI | 0x45 | ok FatalPCIExpEr | 0x45 | ok NonFatalPCIExpEr | 0x40 | ok Cable SAS A0 | Not Readable | ns Cable SAS B0 | Not Readable | ns Fan4A | 8280 RPM | ok Fan4B | 7680 RPM | ok Fan5A | 8280 RPM | ok Fan5B | 7680 RPM | ok Fan6A | 8280 RPM | ok Fan6B | 7920 RPM | ok Fan7A | 8280 RPM | ok Fan7B | 7800 RPM | ok Fan8A | 8280 RPM | ok Fan8B | 7800 RPM | ok Unresp sensor | 0x00 | ok CP Left Pres | 0x00 | ok CP Right Pres | 0x00 | ok 3.3V A PG | 0x00 | ok VSA PG | 0x00 | ok VSA PG | 0x00 | ok TPM Presence | 0x00 | ok Riser 1 Presence | 0x00 | ok Riser 2 Presence | 0x00 | ok Front LED Panel | 0x00 | ok OS Watchdog Time | 0x00 | ok Fan1A Status | 0x00 | ok Fan1B Status | 0x00 | ok Fan2A Status | 0x00 | ok Fan2B Status | 0x00 | ok Fan3A Status | 0x00 | ok Fan3B Status | 0x00 | ok Fan4A Status | 0x00 | ok Fan4B Status | 0x00 | ok Fan5A Status | 0x00 | ok Fan5B Status | 0x00 | ok Fan6A Status | 0x00 | ok Fan6B Status | 0x00 | ok Fan7A Status | 0x00 | ok Fan7B Status | 0x00 | ok Fan8A Status | 0x00 | ok Fan8B Status | 0x00 | ok NVDIMM Warning | 0x41 | ok NVDIMM Error | 0x41 | ok NVDIMM Info | 0x00 | ok Dedicated NIC | 0x00 | ok Presence | 0x00 | ok NVDIMM Battery | Not Readable | ns Exhaust Temp | 37 degrees C | ok LT/Flex Addr | 0x00 | ok QPI Link Err | 0x00 | ok TPM Presence | 0x40 | ok CPU Link Info | 0x41 | ok Chipset Info | 0x40 | ok Memory Config | 0x40 | ok POST Pkg Repair | 0x42 | ok Pfault Fail Safe | Not Readable | ns BP2 PG | 0x00 | ok MMIOChipset Info | 0x00 | ok DIMM Media Info | 0x00 | ok DIMMThermal Info | 0x00 | ok CPU Internal Err | 0x00 | ok GPU1 Temp | disabled | ns GPU2 Temp | disabled | ns GPU3 Temp | disabled | ns A1 | 0x00 | ok A2 | 0x00 | ok A3 | 0x00 | ok A4 | 0x00 | ok A5 | 0x00 | ok A6 | 0x00 | ok A7 | 0x00 | ok A8 | 0x00 | ok A9 | 0x00 | ok A10 | 0x00 | ok A11 | 0x00 | ok A12 | 0x00 | ok B1 | 0x00 | ok B2 | 0x00 | ok B3 | 0x00 | ok B4 | 0x00 | ok B5 | 0x00 | ok B6 | 0x00 | ok B7 | 0x00 | ok B8 | 0x00 | ok B9 | 0x00 | ok B10 | 0x00 | ok B11 | 0x00 | ok B12 | 0x00 | ok Therm Config Err | 0x00 | ok VCORE VR | 1.78 Volts | ok VCORE VR | 1.78 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok :: [ 14:16:05 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ INFO ] :: Loop 2 Complete :: [ 14:16:06 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ BEGIN ] :: Running 'ipmitool sel list' 1 | 01/25/2023 | 09:16:05 AM EST | Event Logging Disabled #0x72 | Log area reset/cleared | Asserted :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 4c4c4544-0042-3910-8039-c6c04f544833 GUID Encoding : SMBIOS (WARNING: IPMI Specification violation!) GUID Version : Name-based using MD5 :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : command Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Sleep Button Disable : not allowed Diag Button Disable : not allowed Reset Button Disable : not allowed Power Button Disable : allowed Sleep Button Disabled: false Diag Button Disabled : false Reset Button Disabled: false Power Button Disabled: false :: [ 14:16:07 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:16:07 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 14:16:07 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:16:07 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 14:16:07 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:16:07 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Loading IANA PEN Registry... Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : Temp (0x1) Entity ID : 3.1 Sensor Type (Threshold) : Temperature Sensor Reading : 38 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Temp (0x2) Entity ID : 3.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Inlet Temp (0x5) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : -7.000 Lower Non-Critical : 3.000 Upper Non-Critical : 43.000 Upper Critical : 47.000 Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : lnc- lcr- unc+ ucr+ Deassertions Enabled : lnc- lcr- unc+ ucr+ Sensor ID : DIMM PG (0x7) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : NDC PG (0x8) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS1 PG FAIL (0x9) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS2 PG FAIL (0xa) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP0 PG (0xb) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP1 PG (0xc) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 1.8V SW PG (0xe) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 2.5V SW PG (0xf) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 5V SW PG (0x10) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PVNN SW PG (0x11) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSB11 SW PG (0x12) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSBM SW PG (0x13) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 3.3V B PG (0x15) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x24) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x25) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x26) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x27) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x28) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x29) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x2a) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x2b) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x2c) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x2e) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x2f) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x30) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x31) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x32) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x33) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x34) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x35) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x36) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : Fan1A (0x38) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan1B (0x40) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2A (0x39) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2B (0x41) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3A (0x3a) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3B (0x42) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Presence (0x48) Entity ID : 10.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x49) Entity ID : 10.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4a) Entity ID : 11.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4b) Entity ID : 11.3 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Intrusion Cable (0x51) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : VGA Cable Pres (0x52) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Presence (0x58) Entity ID : 11.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : BP0 Presence (0x59) Entity ID : 26.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : BP1 Presence (0x5a) Entity ID : 26.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Power Cable (0x5c) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Signal Cable (0x5d) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Power JBP1 (0x5e) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Signal Cable (0x5f) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Power JBP2 (0x60) Entity ID : 26.3 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Presence (0x66) Entity ID : 3.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x67) Entity ID : 3.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Current 1 (0x6b) Entity ID : 10.1 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Current 2 (0x6c) Entity ID : 10.2 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 1 (0x6d) Entity ID : 10.1 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 2 (0x6e) Entity ID : 10.2 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Riser Config Err (0x6f) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : OS Watchdog (0x71) Entity ID : 7.1 Sensor Type (Discrete): Watchdog2 Sensor ID : SEL (0x72) Entity ID : 0.1 Sensor Type (Discrete): Event Logging Disabled Unable to read sensor: Device Not Present Sensor ID : Intrusion (0x73) Entity ID : 7.1 Sensor Type (Discrete): Physical Security Sensor ID : Power Optimized (0x75) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Pwr Consumption (0x76) Entity ID : 7.1 Sensor Type (Threshold) : Current Sensor Reading : 144 (+/- 0) Watts Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 1632.000 Upper Critical : 1800.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertion Events : Assertions Enabled : unc+ ucr+ Deassertions Enabled : unc+ ucr+ Sensor ID : PS Redundancy (0x77) Entity ID : 7.1 Sensor Type (Discrete): Power Supply Unable to read sensor: Device Not Present Sensor ID : Fan Redundancy (0x78) Entity ID : 7.1 Sensor Type (Discrete): Fan States Asserted : Fan [Fully Redundant] Sensor ID : Redundancy (0x79) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD1 (0x7a) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD2 (0x7b) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD (0x7c) Entity ID : 11.4 Sensor Type (Discrete): Module / Board Unable to read sensor: Device Not Present Sensor ID : IO Usage (0x7d) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 0 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : MEM Usage (0x7e) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : SYS Usage (0x7f) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 2 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : CPU Usage (0x80) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 1 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : Status (0x81) Entity ID : 3.1 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x82) Entity ID : 3.2 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x85) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : Status (0x86) Entity ID : 10.2 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : CMOS Battery (0x87) Entity ID : 7.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : ROMB Battery (0x88) Entity ID : 11.2 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : PCIe Slot1 (0x8b) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Sensor ID : PCIe Slot2 (0x8c) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCIe Slot3 (0x8d) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Drive 0 (0x98) Entity ID : 7.1 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : Cable PCIe A0 (0xba) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xbb) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A1 (0xbc) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B1 (0xbd) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A2 (0xbe) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B2 (0xbf) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A0 (0xc0) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS B0 (0xc1) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS A1 (0xc2) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B1 (0xc3) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A2 (0xc4) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B2 (0xc5) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A0 (0xc8) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xc9) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : ECC Corr Err (0x1) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : ECC Uncorr Err (0x2) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : PCI Parity Err (0x4) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCI System Err (0x5) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : SBE Log Disabled (0x6) Entity ID : 34.1 Sensor Type (Discrete): Event Logging Disabled States Asserted : Event Logging Disabled Sensor ID : Unknown (0x8) Entity ID : 34.1 Sensor Type (Discrete): System Event States Asserted : System Event [System Reconfigured] Sensor ID : CPU Machine Chk (0xd) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [Transition to OK] Sensor ID : Memory Spared (0x11) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : Memory Mirrored (0x12) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : PCIE Fatal Err (0x18) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : Chipset Err (0x19) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Err Reg Pointer (0x1a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Mem ECC Warning (0x1b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Transition to Non-recoverable] [Monitor] Sensor ID : POST Err (0x1e) Entity ID : 34.1 Sensor Type (Discrete): System Firmwares Unable to read sensor: Device Not Present Sensor ID : Hdwr version err (0x1f) Entity ID : 34.1 Sensor Type (Discrete): Version Change Unable to read sensor: Device Not Present Sensor ID : Non Fatal PCI Er (0x26) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal IO Error (0x27) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MSR Info Log (0x28) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TXT Status (0x2a) Entity ID : 34.1 Sensor Type (Discrete): OS Critical Stop States Asserted : OS Critical Stop [Error during system startup] Sensor ID : iDPT Mem Fail (0x2b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Correctable ECC] Sensor ID : Additional Info (0x2e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU TDP (0x2f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x30) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x31) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x32) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x33) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Error (0x34) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x35) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x36) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chassis Mismatch (0x37) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change detected] Sensor ID : FatalPCIErrOnBus (0x38) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErBus (0x39) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal PCI SSD Er (0x3a) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalSSDEr (0x3b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPUMachineCheck (0x3c) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [SM BIOS Uncorrectable CPU-complex Error] [Presence detected] Sensor ID : FatalPCIErARI (0x3d) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErARI (0x3e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : FatalPCIExpEr (0x3f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NonFatalPCIExpEr (0x40) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Cable SAS A0 (0xc6) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B0 (0xc7) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Fan4A (0x3b) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan4B (0x43) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5A (0x3c) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5B (0x44) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6A (0x3d) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6B (0x45) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7920 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7A (0x3e) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7B (0x46) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8A (0x3f) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8B (0x47) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Unresp sensor (0xfe) Entity ID : 7.1 Sensor Type (Discrete): Other Sensor ID : CP Left Pres (0x56) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : CP Right Pres (0x57) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : 3.3V A PG (0x14) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x2d) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x37) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : TPM Presence (0x54) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Riser 1 Presence (0x4d) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Riser 2 Presence (0x4e) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Front LED Panel (0x23) Entity ID : 7.1 Sensor Type (Discrete): Management Subsys Health Sensor ID : OS Watchdog Time (0x23) Entity ID : 34.1 Sensor Type (Discrete): Watchdog2 Sensor ID : Fan1A Status (0xe2) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan1B Status (0xe3) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2A Status (0xe4) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2B Status (0xe5) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3A Status (0xe6) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3B Status (0xe7) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4A Status (0xe8) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4B Status (0xe9) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5A Status (0xea) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5B Status (0xeb) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6A Status (0xec) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6B Status (0xed) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7A Status (0xee) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7B Status (0xef) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8A Status (0xf0) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8B Status (0xf1) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Warning (0x46) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Error (0x47) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Info (0x48) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Dedicated NIC (0x70) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4c) Entity ID : 11.4 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : NVDIMM Battery (0x6a) Entity ID : 7.1 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : Exhaust Temp (0x6) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 37 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : 8.000 Upper Non-Critical : 75.000 Upper Critical : 80.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : Sensor ID : LT/Flex Addr (0x25) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPI Link Err (0x29) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TPM Presence (0x41) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change success] Sensor ID : CPU Link Info (0x42) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chipset Info (0x43) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Memory Config (0x44) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : POST Pkg Repair (0x45) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Redundancy Degraded from Fully Redundant] [Redundancy Degraded from Non-Redundant] Sensor ID : Pfault Fail Safe (0x74) Entity ID : 7.1 Sensor Type (Discrete): Voltage Unable to read sensor: Device Not Present Sensor ID : BP2 PG (0xd) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MMIOChipset Info (0x49) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMM Media Info (0x4a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMMThermal Info (0x4b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU Internal Err (0x9) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [IERR] Sensor ID : GPU1 Temp (0x89) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU2 Temp (0x8a) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU3 Temp (0x62) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : A1 (0xca) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : A2 (0xcb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A3 (0xcc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A4 (0xcd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A5 (0xce) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A6 (0xcf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A7 (0xd0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A8 (0xd1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A9 (0xd2) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A10 (0xd3) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A11 (0xd4) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A12 (0xd5) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B1 (0xd6) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : B2 (0xd7) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B3 (0xd8) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B4 (0xd9) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B5 (0xda) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B6 (0xdb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B7 (0xdc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B8 (0xdd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B9 (0xde) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B10 (0xdf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B11 (0xe0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B12 (0xe1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : Therm Config Err (0xfa) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : VCORE VR (0x17) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : VCORE VR (0x18) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1a) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1b) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1c) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1d) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : :: [ 14:16:12 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:16:12 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 32 Device Revision : 1 Firmware Revision : 5.00 IPMI Version : 2.0 Manufacturer ID : 674 Manufacturer Name : Dell Inc. Product ID : 256 (0x0100) Product Name : Unknown (0x100) Device Available : yes Provides Device SDRs : yes Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver Bridge Chassis Device Aux Firmware Rev Info : 0x00 0x01 0x0a 0x14 :: [ 14:16:12 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:16:12 ] :: [ BEGIN ] :: Running 'ipmitool sdr' Temp | 38 degrees C | ok Temp | 35 degrees C | ok Inlet Temp | 30 degrees C | ok DIMM PG | 0x00 | ok NDC PG | 0x00 | ok PS1 PG FAIL | 0x00 | ok PS2 PG FAIL | 0x00 | ok BP0 PG | 0x00 | ok BP1 PG | 0x00 | ok 1.8V SW PG | 0x00 | ok 2.5V SW PG | 0x00 | ok 5V SW PG | 0x00 | ok PVNN SW PG | 0x00 | ok VSB11 SW PG | 0x00 | ok VSBM SW PG | 0x00 | ok 3.3V B PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok Fan1A | 8280 RPM | ok Fan1B | 7680 RPM | ok Fan2A | 8280 RPM | ok Fan2B | 7680 RPM | ok Fan3A | 8280 RPM | ok Fan3B | 7800 RPM | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Intrusion Cable | 0x00 | ok VGA Cable Pres | 0x00 | ok Presence | 0x00 | ok BP0 Presence | 0x00 | ok BP1 Presence | 0x00 | ok Power Cable | Not Readable | ns Signal Cable | Not Readable | ns Power JBP1 | 0x00 | ok Signal Cable | 0x00 | ok Power JBP2 | Not Readable | ns Presence | 0x00 | ok Presence | 0x00 | ok Current 1 | 0.40 Amps | ok Current 2 | 0.40 Amps | ok Voltage 1 | 204 Volts | ok Voltage 2 | 204 Volts | ok Riser Config Err | 0x00 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok Power Optimized | 0x00 | ok Pwr Consumption | 144 Watts | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x00 | ok Redundancy | Not Readable | ns SD1 | Not Readable | ns SD2 | Not Readable | ns SD | Not Readable | ns IO Usage | 0 percent | ok MEM Usage | 3 percent | ok SYS Usage | 2 percent | ok CPU Usage | 1 percent | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok CMOS Battery | 0x00 | ok ROMB Battery | Not Readable | ns PCIe Slot1 | 0x00 | ok PCIe Slot2 | Not Readable | ns PCIe Slot3 | Not Readable | ns Drive 0 | 0x00 | ok Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns Cable PCIe A1 | Not Readable | ns Cable PCIe B1 | Not Readable | ns Cable PCIe A2 | Not Readable | ns Cable PCIe B2 | Not Readable | ns Cable SAS A0 | 0x00 | ok Cable SAS B0 | 0x00 | ok Cable SAS A1 | Not Readable | ns Cable SAS B1 | Not Readable | ns Cable SAS A2 | Not Readable | ns Cable SAS B2 | Not Readable | ns Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns ECC Corr Err | 0xa6 | ok ECC Uncorr Err | 0xa3 | ok PCI Parity Err | Not Readable | ns PCI System Err | 0x9e | ok SBE Log Disabled | 0xa5 | ok Unknown | 0x00 | ok CPU Machine Chk | 0x00 | ok Memory Spared | 0x00 | ok Memory Mirrored | 0x00 | ok PCIE Fatal Err | 0xb2 | ok Chipset Err | Not Readable | ns Err Reg Pointer | 0x7a | ok Mem ECC Warning | 0x7a | ok POST Err | Not Readable | ns Hdwr version err | Not Readable | ns Non Fatal PCI Er | 0x00 | ok Fatal IO Error | 0x00 | ok MSR Info Log | 0x00 | ok TXT Status | 0x00 | ok iDPT Mem Fail | 0x00 | ok Additional Info | 0x00 | ok CPU TDP | 0x00 | ok QPIRC Warning | 0x00 | ok QPIRC Warning | 0x00 | ok Link Warning | 0x00 | ok Link Warning | 0x00 | ok Link Error | 0x00 | ok MRC Warning | 0x00 | ok MRC Warning | 0x00 | ok Chassis Mismatch | 0x00 | ok FatalPCIErrOnBus | 0x45 | ok NonFatalPCIErBus | 0x45 | ok Fatal PCI SSD Er | 0x45 | ok NonFatalSSDEr | 0x45 | ok CPUMachineCheck | 0x45 | ok FatalPCIErARI | 0x45 | ok NonFatalPCIErARI | 0x45 | ok FatalPCIExpEr | 0x45 | ok NonFatalPCIExpEr | 0x40 | ok Cable SAS A0 | Not Readable | ns Cable SAS B0 | Not Readable | ns Fan4A | 8280 RPM | ok Fan4B | 7680 RPM | ok Fan5A | 8280 RPM | ok Fan5B | 7680 RPM | ok Fan6A | 8280 RPM | ok Fan6B | 7920 RPM | ok Fan7A | 8280 RPM | ok Fan7B | 7800 RPM | ok Fan8A | 8280 RPM | ok Fan8B | 7800 RPM | ok Unresp sensor | 0x00 | ok CP Left Pres | 0x00 | ok CP Right Pres | 0x00 | ok 3.3V A PG | 0x00 | ok VSA PG | 0x00 | ok VSA PG | 0x00 | ok TPM Presence | 0x00 | ok Riser 1 Presence | 0x00 | ok Riser 2 Presence | 0x00 | ok Front LED Panel | 0x00 | ok OS Watchdog Time | 0x00 | ok Fan1A Status | 0x00 | ok Fan1B Status | 0x00 | ok Fan2A Status | 0x00 | ok Fan2B Status | 0x00 | ok Fan3A Status | 0x00 | ok Fan3B Status | 0x00 | ok Fan4A Status | 0x00 | ok Fan4B Status | 0x00 | ok Fan5A Status | 0x00 | ok Fan5B Status | 0x00 | ok Fan6A Status | 0x00 | ok Fan6B Status | 0x00 | ok Fan7A Status | 0x00 | ok Fan7B Status | 0x00 | ok Fan8A Status | 0x00 | ok Fan8B Status | 0x00 | ok NVDIMM Warning | 0x41 | ok NVDIMM Error | 0x41 | ok NVDIMM Info | 0x00 | ok Dedicated NIC | 0x00 | ok Presence | 0x00 | ok NVDIMM Battery | Not Readable | ns Exhaust Temp | 37 degrees C | ok LT/Flex Addr | 0x00 | ok QPI Link Err | 0x00 | ok TPM Presence | 0x40 | ok CPU Link Info | 0x41 | ok Chipset Info | 0x40 | ok Memory Config | 0x40 | ok POST Pkg Repair | 0x42 | ok Pfault Fail Safe | Not Readable | ns BP2 PG | 0x00 | ok MMIOChipset Info | 0x00 | ok DIMM Media Info | 0x00 | ok DIMMThermal Info | 0x00 | ok CPU Internal Err | 0x00 | ok GPU1 Temp | disabled | ns GPU2 Temp | disabled | ns GPU3 Temp | disabled | ns A1 | 0x00 | ok A2 | 0x00 | ok A3 | 0x00 | ok A4 | 0x00 | ok A5 | 0x00 | ok A6 | 0x00 | ok A7 | 0x00 | ok A8 | 0x00 | ok A9 | 0x00 | ok A10 | 0x00 | ok A11 | 0x00 | ok A12 | 0x00 | ok B1 | 0x00 | ok B2 | 0x00 | ok B3 | 0x00 | ok B4 | 0x00 | ok B5 | 0x00 | ok B6 | 0x00 | ok B7 | 0x00 | ok B8 | 0x00 | ok B9 | 0x00 | ok B10 | 0x00 | ok B11 | 0x00 | ok B12 | 0x00 | ok Therm Config Err | 0x00 | ok VCORE VR | 1.78 Volts | ok VCORE VR | 1.78 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok :: [ 14:16:17 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:16:17 ] :: [ INFO ] :: Loop 3 Complete :: [ 14:16:17 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ BEGIN ] :: Running 'ipmitool sel list' 1 | 01/25/2023 | 09:16:17 AM EST | Event Logging Disabled #0x72 | Log area reset/cleared | Asserted :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 4c4c4544-0042-3910-8039-c6c04f544833 GUID Encoding : SMBIOS (WARNING: IPMI Specification violation!) GUID Version : Name-based using MD5 :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : command Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Sleep Button Disable : not allowed Diag Button Disable : not allowed Reset Button Disable : not allowed Power Button Disable : allowed Sleep Button Disabled: false Diag Button Disabled : false Reset Button Disabled: false Power Button Disabled: false :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:16:18 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Loading IANA PEN Registry... Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : Temp (0x1) Entity ID : 3.1 Sensor Type (Threshold) : Temperature Sensor Reading : 38 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Temp (0x2) Entity ID : 3.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Inlet Temp (0x5) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : -7.000 Lower Non-Critical : 3.000 Upper Non-Critical : 43.000 Upper Critical : 47.000 Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : lnc- lcr- unc+ ucr+ Deassertions Enabled : lnc- lcr- unc+ ucr+ Sensor ID : DIMM PG (0x7) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : NDC PG (0x8) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS1 PG FAIL (0x9) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS2 PG FAIL (0xa) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP0 PG (0xb) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP1 PG (0xc) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 1.8V SW PG (0xe) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 2.5V SW PG (0xf) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 5V SW PG (0x10) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PVNN SW PG (0x11) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSB11 SW PG (0x12) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSBM SW PG (0x13) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 3.3V B PG (0x15) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x24) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x25) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x26) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x27) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x28) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x29) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x2a) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x2b) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x2c) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x2e) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x2f) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x30) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x31) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x32) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x33) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x34) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x35) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x36) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : Fan1A (0x38) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan1B (0x40) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2A (0x39) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2B (0x41) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3A (0x3a) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3B (0x42) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Presence (0x48) Entity ID : 10.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x49) Entity ID : 10.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4a) Entity ID : 11.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4b) Entity ID : 11.3 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Intrusion Cable (0x51) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : VGA Cable Pres (0x52) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Presence (0x58) Entity ID : 11.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : BP0 Presence (0x59) Entity ID : 26.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : BP1 Presence (0x5a) Entity ID : 26.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Power Cable (0x5c) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Signal Cable (0x5d) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Power JBP1 (0x5e) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Signal Cable (0x5f) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Power JBP2 (0x60) Entity ID : 26.3 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Presence (0x66) Entity ID : 3.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x67) Entity ID : 3.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Current 1 (0x6b) Entity ID : 10.1 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Current 2 (0x6c) Entity ID : 10.2 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 1 (0x6d) Entity ID : 10.1 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 2 (0x6e) Entity ID : 10.2 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Riser Config Err (0x6f) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : OS Watchdog (0x71) Entity ID : 7.1 Sensor Type (Discrete): Watchdog2 Sensor ID : SEL (0x72) Entity ID : 0.1 Sensor Type (Discrete): Event Logging Disabled Unable to read sensor: Device Not Present Sensor ID : Intrusion (0x73) Entity ID : 7.1 Sensor Type (Discrete): Physical Security Sensor ID : Power Optimized (0x75) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Pwr Consumption (0x76) Entity ID : 7.1 Sensor Type (Threshold) : Current Sensor Reading : 144 (+/- 0) Watts Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 1632.000 Upper Critical : 1800.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertion Events : Assertions Enabled : unc+ ucr+ Deassertions Enabled : unc+ ucr+ Sensor ID : PS Redundancy (0x77) Entity ID : 7.1 Sensor Type (Discrete): Power Supply Unable to read sensor: Device Not Present Sensor ID : Fan Redundancy (0x78) Entity ID : 7.1 Sensor Type (Discrete): Fan States Asserted : Fan [Fully Redundant] Sensor ID : Redundancy (0x79) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD1 (0x7a) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD2 (0x7b) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD (0x7c) Entity ID : 11.4 Sensor Type (Discrete): Module / Board Unable to read sensor: Device Not Present Sensor ID : IO Usage (0x7d) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 0 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : MEM Usage (0x7e) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : SYS Usage (0x7f) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 2 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : CPU Usage (0x80) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 1 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : Status (0x81) Entity ID : 3.1 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x82) Entity ID : 3.2 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x85) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : Status (0x86) Entity ID : 10.2 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : CMOS Battery (0x87) Entity ID : 7.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : ROMB Battery (0x88) Entity ID : 11.2 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : PCIe Slot1 (0x8b) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Sensor ID : PCIe Slot2 (0x8c) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCIe Slot3 (0x8d) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Drive 0 (0x98) Entity ID : 7.1 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : Cable PCIe A0 (0xba) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xbb) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A1 (0xbc) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B1 (0xbd) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A2 (0xbe) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B2 (0xbf) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A0 (0xc0) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS B0 (0xc1) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS A1 (0xc2) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B1 (0xc3) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A2 (0xc4) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B2 (0xc5) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A0 (0xc8) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xc9) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : ECC Corr Err (0x1) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : ECC Uncorr Err (0x2) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : PCI Parity Err (0x4) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCI System Err (0x5) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : SBE Log Disabled (0x6) Entity ID : 34.1 Sensor Type (Discrete): Event Logging Disabled States Asserted : Event Logging Disabled Sensor ID : Unknown (0x8) Entity ID : 34.1 Sensor Type (Discrete): System Event States Asserted : System Event [System Reconfigured] Sensor ID : CPU Machine Chk (0xd) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [Transition to OK] Sensor ID : Memory Spared (0x11) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : Memory Mirrored (0x12) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : PCIE Fatal Err (0x18) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : Chipset Err (0x19) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Err Reg Pointer (0x1a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Mem ECC Warning (0x1b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Transition to Non-recoverable] [Monitor] Sensor ID : POST Err (0x1e) Entity ID : 34.1 Sensor Type (Discrete): System Firmwares Unable to read sensor: Device Not Present Sensor ID : Hdwr version err (0x1f) Entity ID : 34.1 Sensor Type (Discrete): Version Change Unable to read sensor: Device Not Present Sensor ID : Non Fatal PCI Er (0x26) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal IO Error (0x27) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MSR Info Log (0x28) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TXT Status (0x2a) Entity ID : 34.1 Sensor Type (Discrete): OS Critical Stop States Asserted : OS Critical Stop [Error during system startup] Sensor ID : iDPT Mem Fail (0x2b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Correctable ECC] Sensor ID : Additional Info (0x2e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU TDP (0x2f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x30) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x31) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x32) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x33) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Error (0x34) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x35) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x36) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chassis Mismatch (0x37) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change detected] Sensor ID : FatalPCIErrOnBus (0x38) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErBus (0x39) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal PCI SSD Er (0x3a) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalSSDEr (0x3b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPUMachineCheck (0x3c) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [SM BIOS Uncorrectable CPU-complex Error] [Presence detected] Sensor ID : FatalPCIErARI (0x3d) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErARI (0x3e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : FatalPCIExpEr (0x3f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NonFatalPCIExpEr (0x40) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Cable SAS A0 (0xc6) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B0 (0xc7) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Fan4A (0x3b) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan4B (0x43) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5A (0x3c) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5B (0x44) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6A (0x3d) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6B (0x45) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7920 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7A (0x3e) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7B (0x46) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8A (0x3f) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8B (0x47) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Unresp sensor (0xfe) Entity ID : 7.1 Sensor Type (Discrete): Other Sensor ID : CP Left Pres (0x56) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : CP Right Pres (0x57) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : 3.3V A PG (0x14) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x2d) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x37) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : TPM Presence (0x54) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Riser 1 Presence (0x4d) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Riser 2 Presence (0x4e) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Front LED Panel (0x23) Entity ID : 7.1 Sensor Type (Discrete): Management Subsys Health Sensor ID : OS Watchdog Time (0x23) Entity ID : 34.1 Sensor Type (Discrete): Watchdog2 Sensor ID : Fan1A Status (0xe2) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan1B Status (0xe3) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2A Status (0xe4) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2B Status (0xe5) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3A Status (0xe6) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3B Status (0xe7) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4A Status (0xe8) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4B Status (0xe9) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5A Status (0xea) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5B Status (0xeb) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6A Status (0xec) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6B Status (0xed) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7A Status (0xee) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7B Status (0xef) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8A Status (0xf0) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8B Status (0xf1) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Warning (0x46) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Error (0x47) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Info (0x48) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Dedicated NIC (0x70) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4c) Entity ID : 11.4 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : NVDIMM Battery (0x6a) Entity ID : 7.1 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : Exhaust Temp (0x6) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 37 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : 8.000 Upper Non-Critical : 75.000 Upper Critical : 80.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : Sensor ID : LT/Flex Addr (0x25) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPI Link Err (0x29) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TPM Presence (0x41) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change success] Sensor ID : CPU Link Info (0x42) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chipset Info (0x43) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Memory Config (0x44) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : POST Pkg Repair (0x45) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Redundancy Degraded from Fully Redundant] [Redundancy Degraded from Non-Redundant] Sensor ID : Pfault Fail Safe (0x74) Entity ID : 7.1 Sensor Type (Discrete): Voltage Unable to read sensor: Device Not Present Sensor ID : BP2 PG (0xd) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MMIOChipset Info (0x49) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMM Media Info (0x4a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMMThermal Info (0x4b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU Internal Err (0x9) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [IERR] Sensor ID : GPU1 Temp (0x89) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU2 Temp (0x8a) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU3 Temp (0x62) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : A1 (0xca) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : A2 (0xcb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A3 (0xcc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A4 (0xcd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A5 (0xce) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A6 (0xcf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A7 (0xd0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A8 (0xd1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A9 (0xd2) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A10 (0xd3) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A11 (0xd4) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A12 (0xd5) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B1 (0xd6) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : B2 (0xd7) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B3 (0xd8) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B4 (0xd9) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B5 (0xda) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B6 (0xdb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B7 (0xdc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B8 (0xdd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B9 (0xde) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B10 (0xdf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B11 (0xe0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B12 (0xe1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : Therm Config Err (0xfa) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : VCORE VR (0x17) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : VCORE VR (0x18) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1a) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1b) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1c) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1d) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : :: [ 14:16:24 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:16:24 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 32 Device Revision : 1 Firmware Revision : 5.00 IPMI Version : 2.0 Manufacturer ID : 674 Manufacturer Name : Dell Inc. Product ID : 256 (0x0100) Product Name : Unknown (0x100) Device Available : yes Provides Device SDRs : yes Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver Bridge Chassis Device Aux Firmware Rev Info : 0x00 0x01 0x0a 0x14 :: [ 14:16:24 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:16:24 ] :: [ BEGIN ] :: Running 'ipmitool sdr' Temp | 38 degrees C | ok Temp | 35 degrees C | ok Inlet Temp | 30 degrees C | ok DIMM PG | 0x00 | ok NDC PG | 0x00 | ok PS1 PG FAIL | 0x00 | ok PS2 PG FAIL | 0x00 | ok BP0 PG | 0x00 | ok BP1 PG | 0x00 | ok 1.8V SW PG | 0x00 | ok 2.5V SW PG | 0x00 | ok 5V SW PG | 0x00 | ok PVNN SW PG | 0x00 | ok VSB11 SW PG | 0x00 | ok VSBM SW PG | 0x00 | ok 3.3V B PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok Fan1A | 8280 RPM | ok Fan1B | 7680 RPM | ok Fan2A | 8280 RPM | ok Fan2B | 7680 RPM | ok Fan3A | 8280 RPM | ok Fan3B | 7800 RPM | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Intrusion Cable | 0x00 | ok VGA Cable Pres | 0x00 | ok Presence | 0x00 | ok BP0 Presence | 0x00 | ok BP1 Presence | 0x00 | ok Power Cable | Not Readable | ns Signal Cable | Not Readable | ns Power JBP1 | 0x00 | ok Signal Cable | 0x00 | ok Power JBP2 | Not Readable | ns Presence | 0x00 | ok Presence | 0x00 | ok Current 1 | 0.40 Amps | ok Current 2 | 0.40 Amps | ok Voltage 1 | 204 Volts | ok Voltage 2 | 204 Volts | ok Riser Config Err | 0x00 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok Power Optimized | 0x00 | ok Pwr Consumption | 144 Watts | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x00 | ok Redundancy | Not Readable | ns SD1 | Not Readable | ns SD2 | Not Readable | ns SD | Not Readable | ns IO Usage | 0 percent | ok MEM Usage | 3 percent | ok SYS Usage | 2 percent | ok CPU Usage | 1 percent | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok CMOS Battery | 0x00 | ok ROMB Battery | Not Readable | ns PCIe Slot1 | 0x00 | ok PCIe Slot2 | Not Readable | ns PCIe Slot3 | Not Readable | ns Drive 0 | 0x00 | ok Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns Cable PCIe A1 | Not Readable | ns Cable PCIe B1 | Not Readable | ns Cable PCIe A2 | Not Readable | ns Cable PCIe B2 | Not Readable | ns Cable SAS A0 | 0x00 | ok Cable SAS B0 | 0x00 | ok Cable SAS A1 | Not Readable | ns Cable SAS B1 | Not Readable | ns Cable SAS A2 | Not Readable | ns Cable SAS B2 | Not Readable | ns Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns ECC Corr Err | 0xa6 | ok ECC Uncorr Err | 0xa3 | ok PCI Parity Err | Not Readable | ns PCI System Err | 0x9e | ok SBE Log Disabled | 0xa5 | ok Unknown | 0x00 | ok CPU Machine Chk | 0x00 | ok Memory Spared | 0x00 | ok Memory Mirrored | 0x00 | ok PCIE Fatal Err | 0xb2 | ok Chipset Err | Not Readable | ns Err Reg Pointer | 0x7a | ok Mem ECC Warning | 0x7a | ok POST Err | Not Readable | ns Hdwr version err | Not Readable | ns Non Fatal PCI Er | 0x00 | ok Fatal IO Error | 0x00 | ok MSR Info Log | 0x00 | ok TXT Status | 0x00 | ok iDPT Mem Fail | 0x00 | ok Additional Info | 0x00 | ok CPU TDP | 0x00 | ok QPIRC Warning | 0x00 | ok QPIRC Warning | 0x00 | ok Link Warning | 0x00 | ok Link Warning | 0x00 | ok Link Error | 0x00 | ok MRC Warning | 0x00 | ok MRC Warning | 0x00 | ok Chassis Mismatch | 0x00 | ok FatalPCIErrOnBus | 0x45 | ok NonFatalPCIErBus | 0x45 | ok Fatal PCI SSD Er | 0x45 | ok NonFatalSSDEr | 0x45 | ok CPUMachineCheck | 0x45 | ok FatalPCIErARI | 0x45 | ok NonFatalPCIErARI | 0x45 | ok FatalPCIExpEr | 0x45 | ok NonFatalPCIExpEr | 0x40 | ok Cable SAS A0 | Not Readable | ns Cable SAS B0 | Not Readable | ns Fan4A | 8280 RPM | ok Fan4B | 7680 RPM | ok Fan5A | 8280 RPM | ok Fan5B | 7680 RPM | ok Fan6A | 8280 RPM | ok Fan6B | 7920 RPM | ok Fan7A | 8280 RPM | ok Fan7B | 7800 RPM | ok Fan8A | 8280 RPM | ok Fan8B | 7800 RPM | ok Unresp sensor | 0x00 | ok CP Left Pres | 0x00 | ok CP Right Pres | 0x00 | ok 3.3V A PG | 0x00 | ok VSA PG | 0x00 | ok VSA PG | 0x00 | ok TPM Presence | 0x00 | ok Riser 1 Presence | 0x00 | ok Riser 2 Presence | 0x00 | ok Front LED Panel | 0x00 | ok OS Watchdog Time | 0x00 | ok Fan1A Status | 0x00 | ok Fan1B Status | 0x00 | ok Fan2A Status | 0x00 | ok Fan2B Status | 0x00 | ok Fan3A Status | 0x00 | ok Fan3B Status | 0x00 | ok Fan4A Status | 0x00 | ok Fan4B Status | 0x00 | ok Fan5A Status | 0x00 | ok Fan5B Status | 0x00 | ok Fan6A Status | 0x00 | ok Fan6B Status | 0x00 | ok Fan7A Status | 0x00 | ok Fan7B Status | 0x00 | ok Fan8A Status | 0x00 | ok Fan8B Status | 0x00 | ok NVDIMM Warning | 0x41 | ok NVDIMM Error | 0x41 | ok NVDIMM Info | 0x00 | ok Dedicated NIC | 0x00 | ok Presence | 0x00 | ok NVDIMM Battery | Not Readable | ns Exhaust Temp | 37 degrees C | ok LT/Flex Addr | 0x00 | ok QPI Link Err | 0x00 | ok TPM Presence | 0x40 | ok CPU Link Info | 0x41 | ok Chipset Info | 0x40 | ok Memory Config | 0x40 | ok POST Pkg Repair | 0x42 | ok Pfault Fail Safe | Not Readable | ns BP2 PG | 0x00 | ok MMIOChipset Info | 0x00 | ok DIMM Media Info | 0x00 | ok DIMMThermal Info | 0x00 | ok CPU Internal Err | 0x00 | ok GPU1 Temp | disabled | ns GPU2 Temp | disabled | ns GPU3 Temp | disabled | ns A1 | 0x00 | ok A2 | 0x00 | ok A3 | 0x00 | ok A4 | 0x00 | ok A5 | 0x00 | ok A6 | 0x00 | ok A7 | 0x00 | ok A8 | 0x00 | ok A9 | 0x00 | ok A10 | 0x00 | ok A11 | 0x00 | ok A12 | 0x00 | ok B1 | 0x00 | ok B2 | 0x00 | ok B3 | 0x00 | ok B4 | 0x00 | ok B5 | 0x00 | ok B6 | 0x00 | ok B7 | 0x00 | ok B8 | 0x00 | ok B9 | 0x00 | ok B10 | 0x00 | ok B11 | 0x00 | ok B12 | 0x00 | ok Therm Config Err | 0x00 | ok VCORE VR | 1.78 Volts | ok VCORE VR | 1.78 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok :: [ 14:16:29 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:16:29 ] :: [ INFO ] :: Loop 4 Complete :: [ 14:16:29 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 14:16:29 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:16:29 ] :: [ BEGIN ] :: Running 'ipmitool sel list' 1 | 01/25/2023 | 09:16:28 AM EST | Event Logging Disabled #0x72 | Log area reset/cleared | Asserted :: [ 14:16:29 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:16:29 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 14:16:29 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:16:29 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 14:16:29 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:16:29 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:16:30 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:16:30 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 4c4c4544-0042-3910-8039-c6c04f544833 GUID Encoding : SMBIOS (WARNING: IPMI Specification violation!) GUID Version : Name-based using MD5 :: [ 14:16:30 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:16:30 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:16:30 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:16:30 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : command Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Sleep Button Disable : not allowed Diag Button Disable : not allowed Reset Button Disable : not allowed Power Button Disable : allowed Sleep Button Disabled: false Diag Button Disabled : false Reset Button Disabled: false Power Button Disabled: false :: [ 14:16:30 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:16:30 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 14:16:30 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:16:30 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 14:16:30 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:16:30 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Loading IANA PEN Registry... Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : Temp (0x1) Entity ID : 3.1 Sensor Type (Threshold) : Temperature Sensor Reading : 38 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Temp (0x2) Entity ID : 3.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Inlet Temp (0x5) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : -7.000 Lower Non-Critical : 3.000 Upper Non-Critical : 43.000 Upper Critical : 47.000 Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : lnc- lcr- unc+ ucr+ Deassertions Enabled : lnc- lcr- unc+ ucr+ Sensor ID : DIMM PG (0x7) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : NDC PG (0x8) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS1 PG FAIL (0x9) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS2 PG FAIL (0xa) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP0 PG (0xb) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP1 PG (0xc) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 1.8V SW PG (0xe) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 2.5V SW PG (0xf) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 5V SW PG (0x10) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PVNN SW PG (0x11) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSB11 SW PG (0x12) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSBM SW PG (0x13) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 3.3V B PG (0x15) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x24) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x25) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x26) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x27) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x28) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x29) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x2a) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x2b) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x2c) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x2e) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x2f) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x30) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x31) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x32) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x33) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x34) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x35) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x36) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : Fan1A (0x38) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan1B (0x40) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2A (0x39) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2B (0x41) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3A (0x3a) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3B (0x42) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Presence (0x48) Entity ID : 10.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x49) Entity ID : 10.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4a) Entity ID : 11.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4b) Entity ID : 11.3 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Intrusion Cable (0x51) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : VGA Cable Pres (0x52) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Presence (0x58) Entity ID : 11.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : BP0 Presence (0x59) Entity ID : 26.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : BP1 Presence (0x5a) Entity ID : 26.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Power Cable (0x5c) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Signal Cable (0x5d) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Power JBP1 (0x5e) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Signal Cable (0x5f) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Power JBP2 (0x60) Entity ID : 26.3 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Presence (0x66) Entity ID : 3.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x67) Entity ID : 3.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Current 1 (0x6b) Entity ID : 10.1 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Current 2 (0x6c) Entity ID : 10.2 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 1 (0x6d) Entity ID : 10.1 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 2 (0x6e) Entity ID : 10.2 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Riser Config Err (0x6f) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : OS Watchdog (0x71) Entity ID : 7.1 Sensor Type (Discrete): Watchdog2 Sensor ID : SEL (0x72) Entity ID : 0.1 Sensor Type (Discrete): Event Logging Disabled Unable to read sensor: Device Not Present Sensor ID : Intrusion (0x73) Entity ID : 7.1 Sensor Type (Discrete): Physical Security Sensor ID : Power Optimized (0x75) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Pwr Consumption (0x76) Entity ID : 7.1 Sensor Type (Threshold) : Current Sensor Reading : 144 (+/- 0) Watts Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 1632.000 Upper Critical : 1800.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertion Events : Assertions Enabled : unc+ ucr+ Deassertions Enabled : unc+ ucr+ Sensor ID : PS Redundancy (0x77) Entity ID : 7.1 Sensor Type (Discrete): Power Supply Unable to read sensor: Device Not Present Sensor ID : Fan Redundancy (0x78) Entity ID : 7.1 Sensor Type (Discrete): Fan States Asserted : Fan [Fully Redundant] Sensor ID : Redundancy (0x79) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD1 (0x7a) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD2 (0x7b) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD (0x7c) Entity ID : 11.4 Sensor Type (Discrete): Module / Board Unable to read sensor: Device Not Present Sensor ID : IO Usage (0x7d) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 0 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : MEM Usage (0x7e) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : SYS Usage (0x7f) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 2 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : CPU Usage (0x80) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 1 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : Status (0x81) Entity ID : 3.1 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x82) Entity ID : 3.2 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x85) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : Status (0x86) Entity ID : 10.2 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : CMOS Battery (0x87) Entity ID : 7.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : ROMB Battery (0x88) Entity ID : 11.2 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : PCIe Slot1 (0x8b) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Sensor ID : PCIe Slot2 (0x8c) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCIe Slot3 (0x8d) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Drive 0 (0x98) Entity ID : 7.1 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : Cable PCIe A0 (0xba) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xbb) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A1 (0xbc) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B1 (0xbd) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A2 (0xbe) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B2 (0xbf) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A0 (0xc0) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS B0 (0xc1) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS A1 (0xc2) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B1 (0xc3) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A2 (0xc4) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B2 (0xc5) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A0 (0xc8) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xc9) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : ECC Corr Err (0x1) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : ECC Uncorr Err (0x2) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : PCI Parity Err (0x4) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCI System Err (0x5) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : SBE Log Disabled (0x6) Entity ID : 34.1 Sensor Type (Discrete): Event Logging Disabled States Asserted : Event Logging Disabled Sensor ID : Unknown (0x8) Entity ID : 34.1 Sensor Type (Discrete): System Event States Asserted : System Event [System Reconfigured] Sensor ID : CPU Machine Chk (0xd) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [Transition to OK] Sensor ID : Memory Spared (0x11) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : Memory Mirrored (0x12) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : PCIE Fatal Err (0x18) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : Chipset Err (0x19) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Err Reg Pointer (0x1a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Mem ECC Warning (0x1b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Transition to Non-recoverable] [Monitor] Sensor ID : POST Err (0x1e) Entity ID : 34.1 Sensor Type (Discrete): System Firmwares Unable to read sensor: Device Not Present Sensor ID : Hdwr version err (0x1f) Entity ID : 34.1 Sensor Type (Discrete): Version Change Unable to read sensor: Device Not Present Sensor ID : Non Fatal PCI Er (0x26) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal IO Error (0x27) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MSR Info Log (0x28) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TXT Status (0x2a) Entity ID : 34.1 Sensor Type (Discrete): OS Critical Stop States Asserted : OS Critical Stop [Error during system startup] Sensor ID : iDPT Mem Fail (0x2b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Correctable ECC] Sensor ID : Additional Info (0x2e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU TDP (0x2f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x30) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x31) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x32) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x33) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Error (0x34) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x35) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x36) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chassis Mismatch (0x37) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change detected] Sensor ID : FatalPCIErrOnBus (0x38) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErBus (0x39) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal PCI SSD Er (0x3a) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalSSDEr (0x3b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPUMachineCheck (0x3c) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [SM BIOS Uncorrectable CPU-complex Error] [Presence detected] Sensor ID : FatalPCIErARI (0x3d) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErARI (0x3e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : FatalPCIExpEr (0x3f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NonFatalPCIExpEr (0x40) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Cable SAS A0 (0xc6) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B0 (0xc7) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Fan4A (0x3b) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan4B (0x43) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5A (0x3c) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5B (0x44) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6A (0x3d) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6B (0x45) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7920 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7A (0x3e) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7B (0x46) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8A (0x3f) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8B (0x47) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Unresp sensor (0xfe) Entity ID : 7.1 Sensor Type (Discrete): Other Sensor ID : CP Left Pres (0x56) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : CP Right Pres (0x57) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : 3.3V A PG (0x14) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x2d) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x37) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : TPM Presence (0x54) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Riser 1 Presence (0x4d) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Riser 2 Presence (0x4e) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Front LED Panel (0x23) Entity ID : 7.1 Sensor Type (Discrete): Management Subsys Health Sensor ID : OS Watchdog Time (0x23) Entity ID : 34.1 Sensor Type (Discrete): Watchdog2 Sensor ID : Fan1A Status (0xe2) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan1B Status (0xe3) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2A Status (0xe4) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2B Status (0xe5) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3A Status (0xe6) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3B Status (0xe7) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4A Status (0xe8) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4B Status (0xe9) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5A Status (0xea) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5B Status (0xeb) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6A Status (0xec) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6B Status (0xed) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7A Status (0xee) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7B Status (0xef) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8A Status (0xf0) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8B Status (0xf1) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Warning (0x46) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Error (0x47) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Info (0x48) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Dedicated NIC (0x70) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4c) Entity ID : 11.4 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : NVDIMM Battery (0x6a) Entity ID : 7.1 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : Exhaust Temp (0x6) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 37 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : 8.000 Upper Non-Critical : 75.000 Upper Critical : 80.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : Sensor ID : LT/Flex Addr (0x25) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPI Link Err (0x29) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TPM Presence (0x41) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change success] Sensor ID : CPU Link Info (0x42) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chipset Info (0x43) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Memory Config (0x44) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : POST Pkg Repair (0x45) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Redundancy Degraded from Fully Redundant] [Redundancy Degraded from Non-Redundant] Sensor ID : Pfault Fail Safe (0x74) Entity ID : 7.1 Sensor Type (Discrete): Voltage Unable to read sensor: Device Not Present Sensor ID : BP2 PG (0xd) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MMIOChipset Info (0x49) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMM Media Info (0x4a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMMThermal Info (0x4b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU Internal Err (0x9) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [IERR] Sensor ID : GPU1 Temp (0x89) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU2 Temp (0x8a) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU3 Temp (0x62) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : A1 (0xca) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : A2 (0xcb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A3 (0xcc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A4 (0xcd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A5 (0xce) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A6 (0xcf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A7 (0xd0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A8 (0xd1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A9 (0xd2) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A10 (0xd3) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A11 (0xd4) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A12 (0xd5) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B1 (0xd6) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : B2 (0xd7) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B3 (0xd8) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B4 (0xd9) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B5 (0xda) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B6 (0xdb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B7 (0xdc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B8 (0xdd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B9 (0xde) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B10 (0xdf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B11 (0xe0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B12 (0xe1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : Therm Config Err (0xfa) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : VCORE VR (0x17) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : VCORE VR (0x18) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1a) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1b) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1c) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1d) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : :: [ 14:16:35 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:16:35 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 32 Device Revision : 1 Firmware Revision : 5.00 IPMI Version : 2.0 Manufacturer ID : 674 Manufacturer Name : Dell Inc. Product ID : 256 (0x0100) Product Name : Unknown (0x100) Device Available : yes Provides Device SDRs : yes Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver Bridge Chassis Device Aux Firmware Rev Info : 0x00 0x01 0x0a 0x14 :: [ 14:16:36 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:16:36 ] :: [ BEGIN ] :: Running 'ipmitool sdr' Temp | 38 degrees C | ok Temp | 35 degrees C | ok Inlet Temp | 30 degrees C | ok DIMM PG | 0x00 | ok NDC PG | 0x00 | ok PS1 PG FAIL | 0x00 | ok PS2 PG FAIL | 0x00 | ok BP0 PG | 0x00 | ok BP1 PG | 0x00 | ok 1.8V SW PG | 0x00 | ok 2.5V SW PG | 0x00 | ok 5V SW PG | 0x00 | ok PVNN SW PG | 0x00 | ok VSB11 SW PG | 0x00 | ok VSBM SW PG | 0x00 | ok 3.3V B PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok Fan1A | 8280 RPM | ok Fan1B | 7680 RPM | ok Fan2A | 8280 RPM | ok Fan2B | 7680 RPM | ok Fan3A | 8280 RPM | ok Fan3B | 7800 RPM | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Intrusion Cable | 0x00 | ok VGA Cable Pres | 0x00 | ok Presence | 0x00 | ok BP0 Presence | 0x00 | ok BP1 Presence | 0x00 | ok Power Cable | Not Readable | ns Signal Cable | Not Readable | ns Power JBP1 | 0x00 | ok Signal Cable | 0x00 | ok Power JBP2 | Not Readable | ns Presence | 0x00 | ok Presence | 0x00 | ok Current 1 | 0.40 Amps | ok Current 2 | 0.40 Amps | ok Voltage 1 | 204 Volts | ok Voltage 2 | 204 Volts | ok Riser Config Err | 0x00 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok Power Optimized | 0x00 | ok Pwr Consumption | 144 Watts | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x00 | ok Redundancy | Not Readable | ns SD1 | Not Readable | ns SD2 | Not Readable | ns SD | Not Readable | ns IO Usage | 0 percent | ok MEM Usage | 3 percent | ok SYS Usage | 2 percent | ok CPU Usage | 1 percent | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok CMOS Battery | 0x00 | ok ROMB Battery | Not Readable | ns PCIe Slot1 | 0x00 | ok PCIe Slot2 | Not Readable | ns PCIe Slot3 | Not Readable | ns Drive 0 | 0x00 | ok Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns Cable PCIe A1 | Not Readable | ns Cable PCIe B1 | Not Readable | ns Cable PCIe A2 | Not Readable | ns Cable PCIe B2 | Not Readable | ns Cable SAS A0 | 0x00 | ok Cable SAS B0 | 0x00 | ok Cable SAS A1 | Not Readable | ns Cable SAS B1 | Not Readable | ns Cable SAS A2 | Not Readable | ns Cable SAS B2 | Not Readable | ns Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns ECC Corr Err | 0xa6 | ok ECC Uncorr Err | 0xa3 | ok PCI Parity Err | Not Readable | ns PCI System Err | 0x9e | ok SBE Log Disabled | 0xa5 | ok Unknown | 0x00 | ok CPU Machine Chk | 0x00 | ok Memory Spared | 0x00 | ok Memory Mirrored | 0x00 | ok PCIE Fatal Err | 0xb2 | ok Chipset Err | Not Readable | ns Err Reg Pointer | 0x7a | ok Mem ECC Warning | 0x7a | ok POST Err | Not Readable | ns Hdwr version err | Not Readable | ns Non Fatal PCI Er | 0x00 | ok Fatal IO Error | 0x00 | ok MSR Info Log | 0x00 | ok TXT Status | 0x00 | ok iDPT Mem Fail | 0x00 | ok Additional Info | 0x00 | ok CPU TDP | 0x00 | ok QPIRC Warning | 0x00 | ok QPIRC Warning | 0x00 | ok Link Warning | 0x00 | ok Link Warning | 0x00 | ok Link Error | 0x00 | ok MRC Warning | 0x00 | ok MRC Warning | 0x00 | ok Chassis Mismatch | 0x00 | ok FatalPCIErrOnBus | 0x45 | ok NonFatalPCIErBus | 0x45 | ok Fatal PCI SSD Er | 0x45 | ok NonFatalSSDEr | 0x45 | ok CPUMachineCheck | 0x45 | ok FatalPCIErARI | 0x45 | ok NonFatalPCIErARI | 0x45 | ok FatalPCIExpEr | 0x45 | ok NonFatalPCIExpEr | 0x40 | ok Cable SAS A0 | Not Readable | ns Cable SAS B0 | Not Readable | ns Fan4A | 8280 RPM | ok Fan4B | 7680 RPM | ok Fan5A | 8280 RPM | ok Fan5B | 7680 RPM | ok Fan6A | 8280 RPM | ok Fan6B | 7920 RPM | ok Fan7A | 8280 RPM | ok Fan7B | 7800 RPM | ok Fan8A | 8280 RPM | ok Fan8B | 7800 RPM | ok Unresp sensor | 0x00 | ok CP Left Pres | 0x00 | ok CP Right Pres | 0x00 | ok 3.3V A PG | 0x00 | ok VSA PG | 0x00 | ok VSA PG | 0x00 | ok TPM Presence | 0x00 | ok Riser 1 Presence | 0x00 | ok Riser 2 Presence | 0x00 | ok Front LED Panel | 0x00 | ok OS Watchdog Time | 0x00 | ok Fan1A Status | 0x00 | ok Fan1B Status | 0x00 | ok Fan2A Status | 0x00 | ok Fan2B Status | 0x00 | ok Fan3A Status | 0x00 | ok Fan3B Status | 0x00 | ok Fan4A Status | 0x00 | ok Fan4B Status | 0x00 | ok Fan5A Status | 0x00 | ok Fan5B Status | 0x00 | ok Fan6A Status | 0x00 | ok Fan6B Status | 0x00 | ok Fan7A Status | 0x00 | ok Fan7B Status | 0x00 | ok Fan8A Status | 0x00 | ok Fan8B Status | 0x00 | ok NVDIMM Warning | 0x41 | ok NVDIMM Error | 0x41 | ok NVDIMM Info | 0x00 | ok Dedicated NIC | 0x00 | ok Presence | 0x00 | ok NVDIMM Battery | Not Readable | ns Exhaust Temp | 37 degrees C | ok LT/Flex Addr | 0x00 | ok QPI Link Err | 0x00 | ok TPM Presence | 0x40 | ok CPU Link Info | 0x41 | ok Chipset Info | 0x40 | ok Memory Config | 0x40 | ok POST Pkg Repair | 0x42 | ok Pfault Fail Safe | Not Readable | ns BP2 PG | 0x00 | ok MMIOChipset Info | 0x00 | ok DIMM Media Info | 0x00 | ok DIMMThermal Info | 0x00 | ok CPU Internal Err | 0x00 | ok GPU1 Temp | disabled | ns GPU2 Temp | disabled | ns GPU3 Temp | disabled | ns A1 | 0x00 | ok A2 | 0x00 | ok A3 | 0x00 | ok A4 | 0x00 | ok A5 | 0x00 | ok A6 | 0x00 | ok A7 | 0x00 | ok A8 | 0x00 | ok A9 | 0x00 | ok A10 | 0x00 | ok A11 | 0x00 | ok A12 | 0x00 | ok B1 | 0x00 | ok B2 | 0x00 | ok B3 | 0x00 | ok B4 | 0x00 | ok B5 | 0x00 | ok B6 | 0x00 | ok B7 | 0x00 | ok B8 | 0x00 | ok B9 | 0x00 | ok B10 | 0x00 | ok B11 | 0x00 | ok B12 | 0x00 | ok Therm Config Err | 0x00 | ok VCORE VR | 1.78 Volts | ok VCORE VR | 1.78 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok :: [ 14:16:40 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:16:40 ] :: [ INFO ] :: Loop 5 Complete :: [ 14:16:40 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ BEGIN ] :: Running 'ipmitool sel list' 1 | 01/25/2023 | 09:16:40 AM EST | Event Logging Disabled #0x72 | Log area reset/cleared | Asserted :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 4c4c4544-0042-3910-8039-c6c04f544833 GUID Encoding : SMBIOS (WARNING: IPMI Specification violation!) GUID Version : Name-based using MD5 :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : command Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Sleep Button Disable : not allowed Diag Button Disable : not allowed Reset Button Disable : not allowed Power Button Disable : allowed Sleep Button Disabled: false Diag Button Disabled : false Reset Button Disabled: false Power Button Disabled: false :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:16:41 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 14:16:42 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:16:42 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Loading IANA PEN Registry... Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : Temp (0x1) Entity ID : 3.1 Sensor Type (Threshold) : Temperature Sensor Reading : 38 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Temp (0x2) Entity ID : 3.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Inlet Temp (0x5) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : -7.000 Lower Non-Critical : 3.000 Upper Non-Critical : 43.000 Upper Critical : 47.000 Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : lnc- lcr- unc+ ucr+ Deassertions Enabled : lnc- lcr- unc+ ucr+ Sensor ID : DIMM PG (0x7) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : NDC PG (0x8) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS1 PG FAIL (0x9) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS2 PG FAIL (0xa) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP0 PG (0xb) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP1 PG (0xc) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 1.8V SW PG (0xe) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 2.5V SW PG (0xf) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 5V SW PG (0x10) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PVNN SW PG (0x11) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSB11 SW PG (0x12) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSBM SW PG (0x13) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 3.3V B PG (0x15) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x24) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x25) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x26) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x27) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x28) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x29) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x2a) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x2b) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x2c) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x2e) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x2f) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x30) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x31) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x32) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x33) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x34) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x35) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x36) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : Fan1A (0x38) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan1B (0x40) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2A (0x39) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2B (0x41) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3A (0x3a) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3B (0x42) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Presence (0x48) Entity ID : 10.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x49) Entity ID : 10.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4a) Entity ID : 11.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4b) Entity ID : 11.3 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Intrusion Cable (0x51) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : VGA Cable Pres (0x52) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Presence (0x58) Entity ID : 11.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : BP0 Presence (0x59) Entity ID : 26.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : BP1 Presence (0x5a) Entity ID : 26.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Power Cable (0x5c) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Signal Cable (0x5d) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Power JBP1 (0x5e) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Signal Cable (0x5f) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Power JBP2 (0x60) Entity ID : 26.3 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Presence (0x66) Entity ID : 3.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x67) Entity ID : 3.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Current 1 (0x6b) Entity ID : 10.1 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Current 2 (0x6c) Entity ID : 10.2 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 1 (0x6d) Entity ID : 10.1 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 2 (0x6e) Entity ID : 10.2 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Riser Config Err (0x6f) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : OS Watchdog (0x71) Entity ID : 7.1 Sensor Type (Discrete): Watchdog2 Sensor ID : SEL (0x72) Entity ID : 0.1 Sensor Type (Discrete): Event Logging Disabled Unable to read sensor: Device Not Present Sensor ID : Intrusion (0x73) Entity ID : 7.1 Sensor Type (Discrete): Physical Security Sensor ID : Power Optimized (0x75) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Pwr Consumption (0x76) Entity ID : 7.1 Sensor Type (Threshold) : Current Sensor Reading : 144 (+/- 0) Watts Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 1632.000 Upper Critical : 1800.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertion Events : Assertions Enabled : unc+ ucr+ Deassertions Enabled : unc+ ucr+ Sensor ID : PS Redundancy (0x77) Entity ID : 7.1 Sensor Type (Discrete): Power Supply Unable to read sensor: Device Not Present Sensor ID : Fan Redundancy (0x78) Entity ID : 7.1 Sensor Type (Discrete): Fan States Asserted : Fan [Fully Redundant] Sensor ID : Redundancy (0x79) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD1 (0x7a) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD2 (0x7b) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD (0x7c) Entity ID : 11.4 Sensor Type (Discrete): Module / Board Unable to read sensor: Device Not Present Sensor ID : IO Usage (0x7d) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 0 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : MEM Usage (0x7e) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : SYS Usage (0x7f) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 2 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : CPU Usage (0x80) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 1 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : Status (0x81) Entity ID : 3.1 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x82) Entity ID : 3.2 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x85) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : Status (0x86) Entity ID : 10.2 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : CMOS Battery (0x87) Entity ID : 7.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : ROMB Battery (0x88) Entity ID : 11.2 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : PCIe Slot1 (0x8b) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Sensor ID : PCIe Slot2 (0x8c) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCIe Slot3 (0x8d) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Drive 0 (0x98) Entity ID : 7.1 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : Cable PCIe A0 (0xba) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xbb) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A1 (0xbc) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B1 (0xbd) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A2 (0xbe) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B2 (0xbf) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A0 (0xc0) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS B0 (0xc1) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS A1 (0xc2) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B1 (0xc3) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A2 (0xc4) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B2 (0xc5) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A0 (0xc8) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xc9) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : ECC Corr Err (0x1) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : ECC Uncorr Err (0x2) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : PCI Parity Err (0x4) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCI System Err (0x5) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : SBE Log Disabled (0x6) Entity ID : 34.1 Sensor Type (Discrete): Event Logging Disabled States Asserted : Event Logging Disabled Sensor ID : Unknown (0x8) Entity ID : 34.1 Sensor Type (Discrete): System Event States Asserted : System Event [System Reconfigured] Sensor ID : CPU Machine Chk (0xd) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [Transition to OK] Sensor ID : Memory Spared (0x11) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : Memory Mirrored (0x12) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : PCIE Fatal Err (0x18) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : Chipset Err (0x19) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Err Reg Pointer (0x1a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Mem ECC Warning (0x1b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Transition to Non-recoverable] [Monitor] Sensor ID : POST Err (0x1e) Entity ID : 34.1 Sensor Type (Discrete): System Firmwares Unable to read sensor: Device Not Present Sensor ID : Hdwr version err (0x1f) Entity ID : 34.1 Sensor Type (Discrete): Version Change Unable to read sensor: Device Not Present Sensor ID : Non Fatal PCI Er (0x26) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal IO Error (0x27) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MSR Info Log (0x28) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TXT Status (0x2a) Entity ID : 34.1 Sensor Type (Discrete): OS Critical Stop States Asserted : OS Critical Stop [Error during system startup] Sensor ID : iDPT Mem Fail (0x2b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Correctable ECC] Sensor ID : Additional Info (0x2e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU TDP (0x2f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x30) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x31) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x32) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x33) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Error (0x34) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x35) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x36) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chassis Mismatch (0x37) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change detected] Sensor ID : FatalPCIErrOnBus (0x38) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErBus (0x39) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal PCI SSD Er (0x3a) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalSSDEr (0x3b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPUMachineCheck (0x3c) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [SM BIOS Uncorrectable CPU-complex Error] [Presence detected] Sensor ID : FatalPCIErARI (0x3d) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErARI (0x3e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : FatalPCIExpEr (0x3f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NonFatalPCIExpEr (0x40) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Cable SAS A0 (0xc6) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B0 (0xc7) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Fan4A (0x3b) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan4B (0x43) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5A (0x3c) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8160 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5B (0x44) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6A (0x3d) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6B (0x45) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7920 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7A (0x3e) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7B (0x46) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8A (0x3f) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8B (0x47) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Unresp sensor (0xfe) Entity ID : 7.1 Sensor Type (Discrete): Other Sensor ID : CP Left Pres (0x56) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : CP Right Pres (0x57) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : 3.3V A PG (0x14) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x2d) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x37) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : TPM Presence (0x54) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Riser 1 Presence (0x4d) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Riser 2 Presence (0x4e) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Front LED Panel (0x23) Entity ID : 7.1 Sensor Type (Discrete): Management Subsys Health Sensor ID : OS Watchdog Time (0x23) Entity ID : 34.1 Sensor Type (Discrete): Watchdog2 Sensor ID : Fan1A Status (0xe2) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan1B Status (0xe3) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2A Status (0xe4) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2B Status (0xe5) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3A Status (0xe6) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3B Status (0xe7) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4A Status (0xe8) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4B Status (0xe9) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5A Status (0xea) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5B Status (0xeb) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6A Status (0xec) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6B Status (0xed) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7A Status (0xee) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7B Status (0xef) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8A Status (0xf0) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8B Status (0xf1) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Warning (0x46) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Error (0x47) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Info (0x48) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Dedicated NIC (0x70) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4c) Entity ID : 11.4 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : NVDIMM Battery (0x6a) Entity ID : 7.1 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : Exhaust Temp (0x6) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 37 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : 8.000 Upper Non-Critical : 75.000 Upper Critical : 80.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : Sensor ID : LT/Flex Addr (0x25) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPI Link Err (0x29) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TPM Presence (0x41) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change success] Sensor ID : CPU Link Info (0x42) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chipset Info (0x43) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Memory Config (0x44) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : POST Pkg Repair (0x45) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Redundancy Degraded from Fully Redundant] [Redundancy Degraded from Non-Redundant] Sensor ID : Pfault Fail Safe (0x74) Entity ID : 7.1 Sensor Type (Discrete): Voltage Unable to read sensor: Device Not Present Sensor ID : BP2 PG (0xd) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MMIOChipset Info (0x49) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMM Media Info (0x4a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMMThermal Info (0x4b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU Internal Err (0x9) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [IERR] Sensor ID : GPU1 Temp (0x89) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU2 Temp (0x8a) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU3 Temp (0x62) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : A1 (0xca) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : A2 (0xcb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A3 (0xcc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A4 (0xcd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A5 (0xce) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A6 (0xcf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A7 (0xd0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A8 (0xd1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A9 (0xd2) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A10 (0xd3) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A11 (0xd4) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A12 (0xd5) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B1 (0xd6) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : B2 (0xd7) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B3 (0xd8) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B4 (0xd9) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B5 (0xda) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B6 (0xdb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B7 (0xdc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B8 (0xdd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B9 (0xde) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B10 (0xdf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B11 (0xe0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B12 (0xe1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : Therm Config Err (0xfa) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : VCORE VR (0x17) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : VCORE VR (0x18) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1a) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1b) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1c) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1d) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : :: [ 14:16:47 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:16:47 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 32 Device Revision : 1 Firmware Revision : 5.00 IPMI Version : 2.0 Manufacturer ID : 674 Manufacturer Name : Dell Inc. Product ID : 256 (0x0100) Product Name : Unknown (0x100) Device Available : yes Provides Device SDRs : yes Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver Bridge Chassis Device Aux Firmware Rev Info : 0x00 0x01 0x0a 0x14 :: [ 14:16:47 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:16:47 ] :: [ BEGIN ] :: Running 'ipmitool sdr' Temp | 38 degrees C | ok Temp | 35 degrees C | ok Inlet Temp | 30 degrees C | ok DIMM PG | 0x00 | ok NDC PG | 0x00 | ok PS1 PG FAIL | 0x00 | ok PS2 PG FAIL | 0x00 | ok BP0 PG | 0x00 | ok BP1 PG | 0x00 | ok 1.8V SW PG | 0x00 | ok 2.5V SW PG | 0x00 | ok 5V SW PG | 0x00 | ok PVNN SW PG | 0x00 | ok VSB11 SW PG | 0x00 | ok VSBM SW PG | 0x00 | ok 3.3V B PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok Fan1A | 8280 RPM | ok Fan1B | 7680 RPM | ok Fan2A | 8280 RPM | ok Fan2B | 7680 RPM | ok Fan3A | 8280 RPM | ok Fan3B | 7800 RPM | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Intrusion Cable | 0x00 | ok VGA Cable Pres | 0x00 | ok Presence | 0x00 | ok BP0 Presence | 0x00 | ok BP1 Presence | 0x00 | ok Power Cable | Not Readable | ns Signal Cable | Not Readable | ns Power JBP1 | 0x00 | ok Signal Cable | 0x00 | ok Power JBP2 | Not Readable | ns Presence | 0x00 | ok Presence | 0x00 | ok Current 1 | 0.40 Amps | ok Current 2 | 0.40 Amps | ok Voltage 1 | 204 Volts | ok Voltage 2 | 204 Volts | ok Riser Config Err | 0x00 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok Power Optimized | 0x00 | ok Pwr Consumption | 144 Watts | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x00 | ok Redundancy | Not Readable | ns SD1 | Not Readable | ns SD2 | Not Readable | ns SD | Not Readable | ns IO Usage | 0 percent | ok MEM Usage | 3 percent | ok SYS Usage | 2 percent | ok CPU Usage | 1 percent | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok CMOS Battery | 0x00 | ok ROMB Battery | Not Readable | ns PCIe Slot1 | 0x00 | ok PCIe Slot2 | Not Readable | ns PCIe Slot3 | Not Readable | ns Drive 0 | 0x00 | ok Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns Cable PCIe A1 | Not Readable | ns Cable PCIe B1 | Not Readable | ns Cable PCIe A2 | Not Readable | ns Cable PCIe B2 | Not Readable | ns Cable SAS A0 | 0x00 | ok Cable SAS B0 | 0x00 | ok Cable SAS A1 | Not Readable | ns Cable SAS B1 | Not Readable | ns Cable SAS A2 | Not Readable | ns Cable SAS B2 | Not Readable | ns Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns ECC Corr Err | 0xa6 | ok ECC Uncorr Err | 0xa3 | ok PCI Parity Err | Not Readable | ns PCI System Err | 0x9e | ok SBE Log Disabled | 0xa5 | ok Unknown | 0x00 | ok CPU Machine Chk | 0x00 | ok Memory Spared | 0x00 | ok Memory Mirrored | 0x00 | ok PCIE Fatal Err | 0xb2 | ok Chipset Err | Not Readable | ns Err Reg Pointer | 0x7a | ok Mem ECC Warning | 0x7a | ok POST Err | Not Readable | ns Hdwr version err | Not Readable | ns Non Fatal PCI Er | 0x00 | ok Fatal IO Error | 0x00 | ok MSR Info Log | 0x00 | ok TXT Status | 0x00 | ok iDPT Mem Fail | 0x00 | ok Additional Info | 0x00 | ok CPU TDP | 0x00 | ok QPIRC Warning | 0x00 | ok QPIRC Warning | 0x00 | ok Link Warning | 0x00 | ok Link Warning | 0x00 | ok Link Error | 0x00 | ok MRC Warning | 0x00 | ok MRC Warning | 0x00 | ok Chassis Mismatch | 0x00 | ok FatalPCIErrOnBus | 0x45 | ok NonFatalPCIErBus | 0x45 | ok Fatal PCI SSD Er | 0x45 | ok NonFatalSSDEr | 0x45 | ok CPUMachineCheck | 0x45 | ok FatalPCIErARI | 0x45 | ok NonFatalPCIErARI | 0x45 | ok FatalPCIExpEr | 0x45 | ok NonFatalPCIExpEr | 0x40 | ok Cable SAS A0 | Not Readable | ns Cable SAS B0 | Not Readable | ns Fan4A | 8280 RPM | ok Fan4B | 7680 RPM | ok Fan5A | 8280 RPM | ok Fan5B | 7680 RPM | ok Fan6A | 8280 RPM | ok Fan6B | 7920 RPM | ok Fan7A | 8280 RPM | ok Fan7B | 7800 RPM | ok Fan8A | 8280 RPM | ok Fan8B | 7800 RPM | ok Unresp sensor | 0x00 | ok CP Left Pres | 0x00 | ok CP Right Pres | 0x00 | ok 3.3V A PG | 0x00 | ok VSA PG | 0x00 | ok VSA PG | 0x00 | ok TPM Presence | 0x00 | ok Riser 1 Presence | 0x00 | ok Riser 2 Presence | 0x00 | ok Front LED Panel | 0x00 | ok OS Watchdog Time | 0x00 | ok Fan1A Status | 0x00 | ok Fan1B Status | 0x00 | ok Fan2A Status | 0x00 | ok Fan2B Status | 0x00 | ok Fan3A Status | 0x00 | ok Fan3B Status | 0x00 | ok Fan4A Status | 0x00 | ok Fan4B Status | 0x00 | ok Fan5A Status | 0x00 | ok Fan5B Status | 0x00 | ok Fan6A Status | 0x00 | ok Fan6B Status | 0x00 | ok Fan7A Status | 0x00 | ok Fan7B Status | 0x00 | ok Fan8A Status | 0x00 | ok Fan8B Status | 0x00 | ok NVDIMM Warning | 0x41 | ok NVDIMM Error | 0x41 | ok NVDIMM Info | 0x00 | ok Dedicated NIC | 0x00 | ok Presence | 0x00 | ok NVDIMM Battery | Not Readable | ns Exhaust Temp | 37 degrees C | ok LT/Flex Addr | 0x00 | ok QPI Link Err | 0x00 | ok TPM Presence | 0x40 | ok CPU Link Info | 0x41 | ok Chipset Info | 0x40 | ok Memory Config | 0x40 | ok POST Pkg Repair | 0x42 | ok Pfault Fail Safe | Not Readable | ns BP2 PG | 0x00 | ok MMIOChipset Info | 0x00 | ok DIMM Media Info | 0x00 | ok DIMMThermal Info | 0x00 | ok CPU Internal Err | 0x00 | ok GPU1 Temp | disabled | ns GPU2 Temp | disabled | ns GPU3 Temp | disabled | ns A1 | 0x00 | ok A2 | 0x00 | ok A3 | 0x00 | ok A4 | 0x00 | ok A5 | 0x00 | ok A6 | 0x00 | ok A7 | 0x00 | ok A8 | 0x00 | ok A9 | 0x00 | ok A10 | 0x00 | ok A11 | 0x00 | ok A12 | 0x00 | ok B1 | 0x00 | ok B2 | 0x00 | ok B3 | 0x00 | ok B4 | 0x00 | ok B5 | 0x00 | ok B6 | 0x00 | ok B7 | 0x00 | ok B8 | 0x00 | ok B9 | 0x00 | ok B10 | 0x00 | ok B11 | 0x00 | ok B12 | 0x00 | ok Therm Config Err | 0x00 | ok VCORE VR | 1.78 Volts | ok VCORE VR | 1.78 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok :: [ 14:16:52 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:16:52 ] :: [ INFO ] :: Loop 6 Complete :: [ 14:16:52 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 14:16:52 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:16:52 ] :: [ BEGIN ] :: Running 'ipmitool sel list' 1 | 01/25/2023 | 09:16:51 AM EST | Event Logging Disabled #0x72 | Log area reset/cleared | Asserted :: [ 14:16:52 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:16:52 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 4c4c4544-0042-3910-8039-c6c04f544833 GUID Encoding : SMBIOS (WARNING: IPMI Specification violation!) GUID Version : Name-based using MD5 :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : command Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Sleep Button Disable : not allowed Diag Button Disable : not allowed Reset Button Disable : not allowed Power Button Disable : allowed Sleep Button Disabled: false Diag Button Disabled : false Reset Button Disabled: false Power Button Disabled: false :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:16:53 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Loading IANA PEN Registry... Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : Temp (0x1) Entity ID : 3.1 Sensor Type (Threshold) : Temperature Sensor Reading : 38 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Temp (0x2) Entity ID : 3.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Inlet Temp (0x5) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : -7.000 Lower Non-Critical : 3.000 Upper Non-Critical : 43.000 Upper Critical : 47.000 Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : lnc- lcr- unc+ ucr+ Deassertions Enabled : lnc- lcr- unc+ ucr+ Sensor ID : DIMM PG (0x7) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : NDC PG (0x8) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS1 PG FAIL (0x9) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS2 PG FAIL (0xa) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP0 PG (0xb) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP1 PG (0xc) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 1.8V SW PG (0xe) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 2.5V SW PG (0xf) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 5V SW PG (0x10) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PVNN SW PG (0x11) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSB11 SW PG (0x12) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSBM SW PG (0x13) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 3.3V B PG (0x15) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x24) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x25) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x26) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x27) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x28) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x29) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x2a) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x2b) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x2c) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x2e) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x2f) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x30) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x31) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x32) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x33) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x34) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x35) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x36) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : Fan1A (0x38) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan1B (0x40) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2A (0x39) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2B (0x41) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3A (0x3a) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3B (0x42) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Presence (0x48) Entity ID : 10.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x49) Entity ID : 10.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4a) Entity ID : 11.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4b) Entity ID : 11.3 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Intrusion Cable (0x51) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : VGA Cable Pres (0x52) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Presence (0x58) Entity ID : 11.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : BP0 Presence (0x59) Entity ID : 26.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : BP1 Presence (0x5a) Entity ID : 26.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Power Cable (0x5c) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Signal Cable (0x5d) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Power JBP1 (0x5e) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Signal Cable (0x5f) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Power JBP2 (0x60) Entity ID : 26.3 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Presence (0x66) Entity ID : 3.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x67) Entity ID : 3.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Current 1 (0x6b) Entity ID : 10.1 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Current 2 (0x6c) Entity ID : 10.2 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 1 (0x6d) Entity ID : 10.1 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 2 (0x6e) Entity ID : 10.2 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Riser Config Err (0x6f) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : OS Watchdog (0x71) Entity ID : 7.1 Sensor Type (Discrete): Watchdog2 Sensor ID : SEL (0x72) Entity ID : 0.1 Sensor Type (Discrete): Event Logging Disabled Unable to read sensor: Device Not Present Sensor ID : Intrusion (0x73) Entity ID : 7.1 Sensor Type (Discrete): Physical Security Sensor ID : Power Optimized (0x75) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Pwr Consumption (0x76) Entity ID : 7.1 Sensor Type (Threshold) : Current Sensor Reading : 144 (+/- 0) Watts Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 1632.000 Upper Critical : 1800.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertion Events : Assertions Enabled : unc+ ucr+ Deassertions Enabled : unc+ ucr+ Sensor ID : PS Redundancy (0x77) Entity ID : 7.1 Sensor Type (Discrete): Power Supply Unable to read sensor: Device Not Present Sensor ID : Fan Redundancy (0x78) Entity ID : 7.1 Sensor Type (Discrete): Fan States Asserted : Fan [Fully Redundant] Sensor ID : Redundancy (0x79) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD1 (0x7a) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD2 (0x7b) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD (0x7c) Entity ID : 11.4 Sensor Type (Discrete): Module / Board Unable to read sensor: Device Not Present Sensor ID : IO Usage (0x7d) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 0 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : MEM Usage (0x7e) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : SYS Usage (0x7f) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 2 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : CPU Usage (0x80) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 1 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : Status (0x81) Entity ID : 3.1 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x82) Entity ID : 3.2 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x85) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : Status (0x86) Entity ID : 10.2 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : CMOS Battery (0x87) Entity ID : 7.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : ROMB Battery (0x88) Entity ID : 11.2 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : PCIe Slot1 (0x8b) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Sensor ID : PCIe Slot2 (0x8c) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCIe Slot3 (0x8d) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Drive 0 (0x98) Entity ID : 7.1 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : Cable PCIe A0 (0xba) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xbb) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A1 (0xbc) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B1 (0xbd) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A2 (0xbe) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B2 (0xbf) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A0 (0xc0) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS B0 (0xc1) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS A1 (0xc2) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B1 (0xc3) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A2 (0xc4) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B2 (0xc5) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A0 (0xc8) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xc9) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : ECC Corr Err (0x1) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : ECC Uncorr Err (0x2) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : PCI Parity Err (0x4) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCI System Err (0x5) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : SBE Log Disabled (0x6) Entity ID : 34.1 Sensor Type (Discrete): Event Logging Disabled States Asserted : Event Logging Disabled Sensor ID : Unknown (0x8) Entity ID : 34.1 Sensor Type (Discrete): System Event States Asserted : System Event [System Reconfigured] Sensor ID : CPU Machine Chk (0xd) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [Transition to OK] Sensor ID : Memory Spared (0x11) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : Memory Mirrored (0x12) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : PCIE Fatal Err (0x18) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : Chipset Err (0x19) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Err Reg Pointer (0x1a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Mem ECC Warning (0x1b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Transition to Non-recoverable] [Monitor] Sensor ID : POST Err (0x1e) Entity ID : 34.1 Sensor Type (Discrete): System Firmwares Unable to read sensor: Device Not Present Sensor ID : Hdwr version err (0x1f) Entity ID : 34.1 Sensor Type (Discrete): Version Change Unable to read sensor: Device Not Present Sensor ID : Non Fatal PCI Er (0x26) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal IO Error (0x27) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MSR Info Log (0x28) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TXT Status (0x2a) Entity ID : 34.1 Sensor Type (Discrete): OS Critical Stop States Asserted : OS Critical Stop [Error during system startup] Sensor ID : iDPT Mem Fail (0x2b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Correctable ECC] Sensor ID : Additional Info (0x2e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU TDP (0x2f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x30) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x31) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x32) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x33) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Error (0x34) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x35) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x36) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chassis Mismatch (0x37) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change detected] Sensor ID : FatalPCIErrOnBus (0x38) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErBus (0x39) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal PCI SSD Er (0x3a) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalSSDEr (0x3b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPUMachineCheck (0x3c) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [SM BIOS Uncorrectable CPU-complex Error] [Presence detected] Sensor ID : FatalPCIErARI (0x3d) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErARI (0x3e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : FatalPCIExpEr (0x3f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NonFatalPCIExpEr (0x40) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Cable SAS A0 (0xc6) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B0 (0xc7) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Fan4A (0x3b) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan4B (0x43) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5A (0x3c) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5B (0x44) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6A (0x3d) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6B (0x45) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7920 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7A (0x3e) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7B (0x46) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8A (0x3f) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8B (0x47) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7920 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Unresp sensor (0xfe) Entity ID : 7.1 Sensor Type (Discrete): Other Sensor ID : CP Left Pres (0x56) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : CP Right Pres (0x57) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : 3.3V A PG (0x14) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x2d) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x37) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : TPM Presence (0x54) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Riser 1 Presence (0x4d) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Riser 2 Presence (0x4e) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Front LED Panel (0x23) Entity ID : 7.1 Sensor Type (Discrete): Management Subsys Health Sensor ID : OS Watchdog Time (0x23) Entity ID : 34.1 Sensor Type (Discrete): Watchdog2 Sensor ID : Fan1A Status (0xe2) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan1B Status (0xe3) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2A Status (0xe4) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2B Status (0xe5) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3A Status (0xe6) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3B Status (0xe7) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4A Status (0xe8) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4B Status (0xe9) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5A Status (0xea) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5B Status (0xeb) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6A Status (0xec) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6B Status (0xed) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7A Status (0xee) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7B Status (0xef) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8A Status (0xf0) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8B Status (0xf1) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Warning (0x46) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Error (0x47) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Info (0x48) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Dedicated NIC (0x70) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4c) Entity ID : 11.4 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : NVDIMM Battery (0x6a) Entity ID : 7.1 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : Exhaust Temp (0x6) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 37 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : 8.000 Upper Non-Critical : 75.000 Upper Critical : 80.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : Sensor ID : LT/Flex Addr (0x25) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPI Link Err (0x29) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TPM Presence (0x41) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change success] Sensor ID : CPU Link Info (0x42) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chipset Info (0x43) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Memory Config (0x44) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : POST Pkg Repair (0x45) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Redundancy Degraded from Fully Redundant] [Redundancy Degraded from Non-Redundant] Sensor ID : Pfault Fail Safe (0x74) Entity ID : 7.1 Sensor Type (Discrete): Voltage Unable to read sensor: Device Not Present Sensor ID : BP2 PG (0xd) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MMIOChipset Info (0x49) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMM Media Info (0x4a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMMThermal Info (0x4b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU Internal Err (0x9) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [IERR] Sensor ID : GPU1 Temp (0x89) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU2 Temp (0x8a) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU3 Temp (0x62) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : A1 (0xca) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : A2 (0xcb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A3 (0xcc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A4 (0xcd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A5 (0xce) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A6 (0xcf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A7 (0xd0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A8 (0xd1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A9 (0xd2) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A10 (0xd3) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A11 (0xd4) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A12 (0xd5) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B1 (0xd6) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : B2 (0xd7) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B3 (0xd8) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B4 (0xd9) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B5 (0xda) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B6 (0xdb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B7 (0xdc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B8 (0xdd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B9 (0xde) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B10 (0xdf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B11 (0xe0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B12 (0xe1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : Therm Config Err (0xfa) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : VCORE VR (0x17) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : VCORE VR (0x18) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1a) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1b) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1c) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1d) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : :: [ 14:16:59 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:16:59 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 32 Device Revision : 1 Firmware Revision : 5.00 IPMI Version : 2.0 Manufacturer ID : 674 Manufacturer Name : Dell Inc. Product ID : 256 (0x0100) Product Name : Unknown (0x100) Device Available : yes Provides Device SDRs : yes Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver Bridge Chassis Device Aux Firmware Rev Info : 0x00 0x01 0x0a 0x14 :: [ 14:16:59 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:16:59 ] :: [ BEGIN ] :: Running 'ipmitool sdr' Temp | 38 degrees C | ok Temp | 35 degrees C | ok Inlet Temp | 30 degrees C | ok DIMM PG | 0x00 | ok NDC PG | 0x00 | ok PS1 PG FAIL | 0x00 | ok PS2 PG FAIL | 0x00 | ok BP0 PG | 0x00 | ok BP1 PG | 0x00 | ok 1.8V SW PG | 0x00 | ok 2.5V SW PG | 0x00 | ok 5V SW PG | 0x00 | ok PVNN SW PG | 0x00 | ok VSB11 SW PG | 0x00 | ok VSBM SW PG | 0x00 | ok 3.3V B PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok Fan1A | 8280 RPM | ok Fan1B | 7680 RPM | ok Fan2A | 8280 RPM | ok Fan2B | 7680 RPM | ok Fan3A | 8280 RPM | ok Fan3B | 7800 RPM | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Intrusion Cable | 0x00 | ok VGA Cable Pres | 0x00 | ok Presence | 0x00 | ok BP0 Presence | 0x00 | ok BP1 Presence | 0x00 | ok Power Cable | Not Readable | ns Signal Cable | Not Readable | ns Power JBP1 | 0x00 | ok Signal Cable | 0x00 | ok Power JBP2 | Not Readable | ns Presence | 0x00 | ok Presence | 0x00 | ok Current 1 | 0.40 Amps | ok Current 2 | 0.40 Amps | ok Voltage 1 | 204 Volts | ok Voltage 2 | 204 Volts | ok Riser Config Err | 0x00 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok Power Optimized | 0x00 | ok Pwr Consumption | 144 Watts | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x00 | ok Redundancy | Not Readable | ns SD1 | Not Readable | ns SD2 | Not Readable | ns SD | Not Readable | ns IO Usage | 0 percent | ok MEM Usage | 3 percent | ok SYS Usage | 2 percent | ok CPU Usage | 1 percent | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok CMOS Battery | 0x00 | ok ROMB Battery | Not Readable | ns PCIe Slot1 | 0x00 | ok PCIe Slot2 | Not Readable | ns PCIe Slot3 | Not Readable | ns Drive 0 | 0x00 | ok Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns Cable PCIe A1 | Not Readable | ns Cable PCIe B1 | Not Readable | ns Cable PCIe A2 | Not Readable | ns Cable PCIe B2 | Not Readable | ns Cable SAS A0 | 0x00 | ok Cable SAS B0 | 0x00 | ok Cable SAS A1 | Not Readable | ns Cable SAS B1 | Not Readable | ns Cable SAS A2 | Not Readable | ns Cable SAS B2 | Not Readable | ns Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns ECC Corr Err | 0xa6 | ok ECC Uncorr Err | 0xa3 | ok PCI Parity Err | Not Readable | ns PCI System Err | 0x9e | ok SBE Log Disabled | 0xa5 | ok Unknown | 0x00 | ok CPU Machine Chk | 0x00 | ok Memory Spared | 0x00 | ok Memory Mirrored | 0x00 | ok PCIE Fatal Err | 0xb2 | ok Chipset Err | Not Readable | ns Err Reg Pointer | 0x7a | ok Mem ECC Warning | 0x7a | ok POST Err | Not Readable | ns Hdwr version err | Not Readable | ns Non Fatal PCI Er | 0x00 | ok Fatal IO Error | 0x00 | ok MSR Info Log | 0x00 | ok TXT Status | 0x00 | ok iDPT Mem Fail | 0x00 | ok Additional Info | 0x00 | ok CPU TDP | 0x00 | ok QPIRC Warning | 0x00 | ok QPIRC Warning | 0x00 | ok Link Warning | 0x00 | ok Link Warning | 0x00 | ok Link Error | 0x00 | ok MRC Warning | 0x00 | ok MRC Warning | 0x00 | ok Chassis Mismatch | 0x00 | ok FatalPCIErrOnBus | 0x45 | ok NonFatalPCIErBus | 0x45 | ok Fatal PCI SSD Er | 0x45 | ok NonFatalSSDEr | 0x45 | ok CPUMachineCheck | 0x45 | ok FatalPCIErARI | 0x45 | ok NonFatalPCIErARI | 0x45 | ok FatalPCIExpEr | 0x45 | ok NonFatalPCIExpEr | 0x40 | ok Cable SAS A0 | Not Readable | ns Cable SAS B0 | Not Readable | ns Fan4A | 8280 RPM | ok Fan4B | 7680 RPM | ok Fan5A | 8280 RPM | ok Fan5B | 7680 RPM | ok Fan6A | 8280 RPM | ok Fan6B | 7920 RPM | ok Fan7A | 8280 RPM | ok Fan7B | 7800 RPM | ok Fan8A | 8280 RPM | ok Fan8B | 7800 RPM | ok Unresp sensor | 0x00 | ok CP Left Pres | 0x00 | ok CP Right Pres | 0x00 | ok 3.3V A PG | 0x00 | ok VSA PG | 0x00 | ok VSA PG | 0x00 | ok TPM Presence | 0x00 | ok Riser 1 Presence | 0x00 | ok Riser 2 Presence | 0x00 | ok Front LED Panel | 0x00 | ok OS Watchdog Time | 0x00 | ok Fan1A Status | 0x00 | ok Fan1B Status | 0x00 | ok Fan2A Status | 0x00 | ok Fan2B Status | 0x00 | ok Fan3A Status | 0x00 | ok Fan3B Status | 0x00 | ok Fan4A Status | 0x00 | ok Fan4B Status | 0x00 | ok Fan5A Status | 0x00 | ok Fan5B Status | 0x00 | ok Fan6A Status | 0x00 | ok Fan6B Status | 0x00 | ok Fan7A Status | 0x00 | ok Fan7B Status | 0x00 | ok Fan8A Status | 0x00 | ok Fan8B Status | 0x00 | ok NVDIMM Warning | 0x41 | ok NVDIMM Error | 0x41 | ok NVDIMM Info | 0x00 | ok Dedicated NIC | 0x00 | ok Presence | 0x00 | ok NVDIMM Battery | Not Readable | ns Exhaust Temp | 37 degrees C | ok LT/Flex Addr | 0x00 | ok QPI Link Err | 0x00 | ok TPM Presence | 0x40 | ok CPU Link Info | 0x41 | ok Chipset Info | 0x40 | ok Memory Config | 0x40 | ok POST Pkg Repair | 0x42 | ok Pfault Fail Safe | Not Readable | ns BP2 PG | 0x00 | ok MMIOChipset Info | 0x00 | ok DIMM Media Info | 0x00 | ok DIMMThermal Info | 0x00 | ok CPU Internal Err | 0x00 | ok GPU1 Temp | disabled | ns GPU2 Temp | disabled | ns GPU3 Temp | disabled | ns A1 | 0x00 | ok A2 | 0x00 | ok A3 | 0x00 | ok A4 | 0x00 | ok A5 | 0x00 | ok A6 | 0x00 | ok A7 | 0x00 | ok A8 | 0x00 | ok A9 | 0x00 | ok A10 | 0x00 | ok A11 | 0x00 | ok A12 | 0x00 | ok B1 | 0x00 | ok B2 | 0x00 | ok B3 | 0x00 | ok B4 | 0x00 | ok B5 | 0x00 | ok B6 | 0x00 | ok B7 | 0x00 | ok B8 | 0x00 | ok B9 | 0x00 | ok B10 | 0x00 | ok B11 | 0x00 | ok B12 | 0x00 | ok Therm Config Err | 0x00 | ok VCORE VR | 1.78 Volts | ok VCORE VR | 1.78 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ INFO ] :: Loop 7 Complete :: [ 14:17:04 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ BEGIN ] :: Running 'ipmitool sel list' 1 | 01/25/2023 | 09:17:03 AM EST | Event Logging Disabled #0x72 | Log area reset/cleared | Asserted :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 4c4c4544-0042-3910-8039-c6c04f544833 GUID Encoding : SMBIOS (WARNING: IPMI Specification violation!) GUID Version : Name-based using MD5 :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : command Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Sleep Button Disable : not allowed Diag Button Disable : not allowed Reset Button Disable : not allowed Power Button Disable : allowed Sleep Button Disabled: false Diag Button Disabled : false Reset Button Disabled: false Power Button Disabled: false :: [ 14:17:05 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:17:05 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 14:17:05 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:17:05 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 14:17:05 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:17:05 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Loading IANA PEN Registry... Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : Temp (0x1) Entity ID : 3.1 Sensor Type (Threshold) : Temperature Sensor Reading : 38 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Temp (0x2) Entity ID : 3.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Inlet Temp (0x5) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : -7.000 Lower Non-Critical : 3.000 Upper Non-Critical : 43.000 Upper Critical : 47.000 Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : lnc- lcr- unc+ ucr+ Deassertions Enabled : lnc- lcr- unc+ ucr+ Sensor ID : DIMM PG (0x7) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : NDC PG (0x8) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS1 PG FAIL (0x9) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS2 PG FAIL (0xa) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP0 PG (0xb) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP1 PG (0xc) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 1.8V SW PG (0xe) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 2.5V SW PG (0xf) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 5V SW PG (0x10) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PVNN SW PG (0x11) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSB11 SW PG (0x12) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSBM SW PG (0x13) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 3.3V B PG (0x15) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x24) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x25) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x26) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x27) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x28) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x29) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x2a) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x2b) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x2c) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x2e) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x2f) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x30) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x31) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x32) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x33) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x34) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x35) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x36) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : Fan1A (0x38) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan1B (0x40) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2A (0x39) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2B (0x41) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3A (0x3a) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3B (0x42) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Presence (0x48) Entity ID : 10.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x49) Entity ID : 10.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4a) Entity ID : 11.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4b) Entity ID : 11.3 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Intrusion Cable (0x51) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : VGA Cable Pres (0x52) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Presence (0x58) Entity ID : 11.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : BP0 Presence (0x59) Entity ID : 26.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : BP1 Presence (0x5a) Entity ID : 26.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Power Cable (0x5c) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Signal Cable (0x5d) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Power JBP1 (0x5e) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Signal Cable (0x5f) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Power JBP2 (0x60) Entity ID : 26.3 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Presence (0x66) Entity ID : 3.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x67) Entity ID : 3.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Current 1 (0x6b) Entity ID : 10.1 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Current 2 (0x6c) Entity ID : 10.2 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 1 (0x6d) Entity ID : 10.1 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 2 (0x6e) Entity ID : 10.2 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Riser Config Err (0x6f) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : OS Watchdog (0x71) Entity ID : 7.1 Sensor Type (Discrete): Watchdog2 Sensor ID : SEL (0x72) Entity ID : 0.1 Sensor Type (Discrete): Event Logging Disabled Unable to read sensor: Device Not Present Sensor ID : Intrusion (0x73) Entity ID : 7.1 Sensor Type (Discrete): Physical Security Sensor ID : Power Optimized (0x75) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Pwr Consumption (0x76) Entity ID : 7.1 Sensor Type (Threshold) : Current Sensor Reading : 144 (+/- 0) Watts Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 1632.000 Upper Critical : 1800.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertion Events : Assertions Enabled : unc+ ucr+ Deassertions Enabled : unc+ ucr+ Sensor ID : PS Redundancy (0x77) Entity ID : 7.1 Sensor Type (Discrete): Power Supply Unable to read sensor: Device Not Present Sensor ID : Fan Redundancy (0x78) Entity ID : 7.1 Sensor Type (Discrete): Fan States Asserted : Fan [Fully Redundant] Sensor ID : Redundancy (0x79) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD1 (0x7a) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD2 (0x7b) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD (0x7c) Entity ID : 11.4 Sensor Type (Discrete): Module / Board Unable to read sensor: Device Not Present Sensor ID : IO Usage (0x7d) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 0 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : MEM Usage (0x7e) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : SYS Usage (0x7f) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 2 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : CPU Usage (0x80) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 1 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : Status (0x81) Entity ID : 3.1 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x82) Entity ID : 3.2 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x85) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : Status (0x86) Entity ID : 10.2 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : CMOS Battery (0x87) Entity ID : 7.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : ROMB Battery (0x88) Entity ID : 11.2 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : PCIe Slot1 (0x8b) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Sensor ID : PCIe Slot2 (0x8c) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCIe Slot3 (0x8d) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Drive 0 (0x98) Entity ID : 7.1 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : Cable PCIe A0 (0xba) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xbb) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A1 (0xbc) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B1 (0xbd) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A2 (0xbe) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B2 (0xbf) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A0 (0xc0) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS B0 (0xc1) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS A1 (0xc2) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B1 (0xc3) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A2 (0xc4) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B2 (0xc5) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A0 (0xc8) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xc9) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : ECC Corr Err (0x1) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : ECC Uncorr Err (0x2) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : PCI Parity Err (0x4) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCI System Err (0x5) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : SBE Log Disabled (0x6) Entity ID : 34.1 Sensor Type (Discrete): Event Logging Disabled States Asserted : Event Logging Disabled Sensor ID : Unknown (0x8) Entity ID : 34.1 Sensor Type (Discrete): System Event States Asserted : System Event [System Reconfigured] Sensor ID : CPU Machine Chk (0xd) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [Transition to OK] Sensor ID : Memory Spared (0x11) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : Memory Mirrored (0x12) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : PCIE Fatal Err (0x18) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : Chipset Err (0x19) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Err Reg Pointer (0x1a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Mem ECC Warning (0x1b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Transition to Non-recoverable] [Monitor] Sensor ID : POST Err (0x1e) Entity ID : 34.1 Sensor Type (Discrete): System Firmwares Unable to read sensor: Device Not Present Sensor ID : Hdwr version err (0x1f) Entity ID : 34.1 Sensor Type (Discrete): Version Change Unable to read sensor: Device Not Present Sensor ID : Non Fatal PCI Er (0x26) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal IO Error (0x27) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MSR Info Log (0x28) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TXT Status (0x2a) Entity ID : 34.1 Sensor Type (Discrete): OS Critical Stop States Asserted : OS Critical Stop [Error during system startup] Sensor ID : iDPT Mem Fail (0x2b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Correctable ECC] Sensor ID : Additional Info (0x2e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU TDP (0x2f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x30) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x31) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x32) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x33) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Error (0x34) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x35) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x36) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chassis Mismatch (0x37) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change detected] Sensor ID : FatalPCIErrOnBus (0x38) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErBus (0x39) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal PCI SSD Er (0x3a) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalSSDEr (0x3b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPUMachineCheck (0x3c) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [SM BIOS Uncorrectable CPU-complex Error] [Presence detected] Sensor ID : FatalPCIErARI (0x3d) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErARI (0x3e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : FatalPCIExpEr (0x3f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NonFatalPCIExpEr (0x40) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Cable SAS A0 (0xc6) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B0 (0xc7) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Fan4A (0x3b) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan4B (0x43) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5A (0x3c) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5B (0x44) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6A (0x3d) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6B (0x45) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7920 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7A (0x3e) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7B (0x46) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8A (0x3f) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8B (0x47) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Unresp sensor (0xfe) Entity ID : 7.1 Sensor Type (Discrete): Other Sensor ID : CP Left Pres (0x56) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : CP Right Pres (0x57) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : 3.3V A PG (0x14) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x2d) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x37) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : TPM Presence (0x54) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Riser 1 Presence (0x4d) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Riser 2 Presence (0x4e) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Front LED Panel (0x23) Entity ID : 7.1 Sensor Type (Discrete): Management Subsys Health Sensor ID : OS Watchdog Time (0x23) Entity ID : 34.1 Sensor Type (Discrete): Watchdog2 Sensor ID : Fan1A Status (0xe2) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan1B Status (0xe3) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2A Status (0xe4) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2B Status (0xe5) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3A Status (0xe6) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3B Status (0xe7) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4A Status (0xe8) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4B Status (0xe9) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5A Status (0xea) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5B Status (0xeb) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6A Status (0xec) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6B Status (0xed) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7A Status (0xee) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7B Status (0xef) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8A Status (0xf0) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8B Status (0xf1) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Warning (0x46) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Error (0x47) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Info (0x48) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Dedicated NIC (0x70) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4c) Entity ID : 11.4 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : NVDIMM Battery (0x6a) Entity ID : 7.1 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : Exhaust Temp (0x6) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 37 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : 8.000 Upper Non-Critical : 75.000 Upper Critical : 80.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : Sensor ID : LT/Flex Addr (0x25) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPI Link Err (0x29) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TPM Presence (0x41) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change success] Sensor ID : CPU Link Info (0x42) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chipset Info (0x43) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Memory Config (0x44) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : POST Pkg Repair (0x45) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Redundancy Degraded from Fully Redundant] [Redundancy Degraded from Non-Redundant] Sensor ID : Pfault Fail Safe (0x74) Entity ID : 7.1 Sensor Type (Discrete): Voltage Unable to read sensor: Device Not Present Sensor ID : BP2 PG (0xd) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MMIOChipset Info (0x49) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMM Media Info (0x4a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMMThermal Info (0x4b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU Internal Err (0x9) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [IERR] Sensor ID : GPU1 Temp (0x89) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU2 Temp (0x8a) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU3 Temp (0x62) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : A1 (0xca) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : A2 (0xcb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A3 (0xcc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A4 (0xcd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A5 (0xce) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A6 (0xcf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A7 (0xd0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A8 (0xd1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A9 (0xd2) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A10 (0xd3) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A11 (0xd4) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A12 (0xd5) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B1 (0xd6) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : B2 (0xd7) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B3 (0xd8) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B4 (0xd9) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B5 (0xda) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B6 (0xdb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B7 (0xdc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B8 (0xdd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B9 (0xde) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B10 (0xdf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B11 (0xe0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B12 (0xe1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : Therm Config Err (0xfa) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : VCORE VR (0x17) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : VCORE VR (0x18) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1a) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1b) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1c) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1d) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : :: [ 14:17:10 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:17:10 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 32 Device Revision : 1 Firmware Revision : 5.00 IPMI Version : 2.0 Manufacturer ID : 674 Manufacturer Name : Dell Inc. Product ID : 256 (0x0100) Product Name : Unknown (0x100) Device Available : yes Provides Device SDRs : yes Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver Bridge Chassis Device Aux Firmware Rev Info : 0x00 0x01 0x0a 0x14 :: [ 14:17:10 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:17:10 ] :: [ BEGIN ] :: Running 'ipmitool sdr' Temp | 38 degrees C | ok Temp | 35 degrees C | ok Inlet Temp | 30 degrees C | ok DIMM PG | 0x00 | ok NDC PG | 0x00 | ok PS1 PG FAIL | 0x00 | ok PS2 PG FAIL | 0x00 | ok BP0 PG | 0x00 | ok BP1 PG | 0x00 | ok 1.8V SW PG | 0x00 | ok 2.5V SW PG | 0x00 | ok 5V SW PG | 0x00 | ok PVNN SW PG | 0x00 | ok VSB11 SW PG | 0x00 | ok VSBM SW PG | 0x00 | ok 3.3V B PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok Fan1A | 8280 RPM | ok Fan1B | 7680 RPM | ok Fan2A | 8280 RPM | ok Fan2B | 7680 RPM | ok Fan3A | 8280 RPM | ok Fan3B | 7800 RPM | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Intrusion Cable | 0x00 | ok VGA Cable Pres | 0x00 | ok Presence | 0x00 | ok BP0 Presence | 0x00 | ok BP1 Presence | 0x00 | ok Power Cable | Not Readable | ns Signal Cable | Not Readable | ns Power JBP1 | 0x00 | ok Signal Cable | 0x00 | ok Power JBP2 | Not Readable | ns Presence | 0x00 | ok Presence | 0x00 | ok Current 1 | 0.40 Amps | ok Current 2 | 0.40 Amps | ok Voltage 1 | 204 Volts | ok Voltage 2 | 204 Volts | ok Riser Config Err | 0x00 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok Power Optimized | 0x00 | ok Pwr Consumption | 144 Watts | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x00 | ok Redundancy | Not Readable | ns SD1 | Not Readable | ns SD2 | Not Readable | ns SD | Not Readable | ns IO Usage | 0 percent | ok MEM Usage | 3 percent | ok SYS Usage | 2 percent | ok CPU Usage | 1 percent | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok CMOS Battery | 0x00 | ok ROMB Battery | Not Readable | ns PCIe Slot1 | 0x00 | ok PCIe Slot2 | Not Readable | ns PCIe Slot3 | Not Readable | ns Drive 0 | 0x00 | ok Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns Cable PCIe A1 | Not Readable | ns Cable PCIe B1 | Not Readable | ns Cable PCIe A2 | Not Readable | ns Cable PCIe B2 | Not Readable | ns Cable SAS A0 | 0x00 | ok Cable SAS B0 | 0x00 | ok Cable SAS A1 | Not Readable | ns Cable SAS B1 | Not Readable | ns Cable SAS A2 | Not Readable | ns Cable SAS B2 | Not Readable | ns Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns ECC Corr Err | 0xa6 | ok ECC Uncorr Err | 0xa3 | ok PCI Parity Err | Not Readable | ns PCI System Err | 0x9e | ok SBE Log Disabled | 0xa5 | ok Unknown | 0x00 | ok CPU Machine Chk | 0x00 | ok Memory Spared | 0x00 | ok Memory Mirrored | 0x00 | ok PCIE Fatal Err | 0xb2 | ok Chipset Err | Not Readable | ns Err Reg Pointer | 0x7a | ok Mem ECC Warning | 0x7a | ok POST Err | Not Readable | ns Hdwr version err | Not Readable | ns Non Fatal PCI Er | 0x00 | ok Fatal IO Error | 0x00 | ok MSR Info Log | 0x00 | ok TXT Status | 0x00 | ok iDPT Mem Fail | 0x00 | ok Additional Info | 0x00 | ok CPU TDP | 0x00 | ok QPIRC Warning | 0x00 | ok QPIRC Warning | 0x00 | ok Link Warning | 0x00 | ok Link Warning | 0x00 | ok Link Error | 0x00 | ok MRC Warning | 0x00 | ok MRC Warning | 0x00 | ok Chassis Mismatch | 0x00 | ok FatalPCIErrOnBus | 0x45 | ok NonFatalPCIErBus | 0x45 | ok Fatal PCI SSD Er | 0x45 | ok NonFatalSSDEr | 0x45 | ok CPUMachineCheck | 0x45 | ok FatalPCIErARI | 0x45 | ok NonFatalPCIErARI | 0x45 | ok FatalPCIExpEr | 0x45 | ok NonFatalPCIExpEr | 0x40 | ok Cable SAS A0 | Not Readable | ns Cable SAS B0 | Not Readable | ns Fan4A | 8280 RPM | ok Fan4B | 7680 RPM | ok Fan5A | 8280 RPM | ok Fan5B | 7680 RPM | ok Fan6A | 8280 RPM | ok Fan6B | 7920 RPM | ok Fan7A | 8280 RPM | ok Fan7B | 7800 RPM | ok Fan8A | 8280 RPM | ok Fan8B | 7800 RPM | ok Unresp sensor | 0x00 | ok CP Left Pres | 0x00 | ok CP Right Pres | 0x00 | ok 3.3V A PG | 0x00 | ok VSA PG | 0x00 | ok VSA PG | 0x00 | ok TPM Presence | 0x00 | ok Riser 1 Presence | 0x00 | ok Riser 2 Presence | 0x00 | ok Front LED Panel | 0x00 | ok OS Watchdog Time | 0x00 | ok Fan1A Status | 0x00 | ok Fan1B Status | 0x00 | ok Fan2A Status | 0x00 | ok Fan2B Status | 0x00 | ok Fan3A Status | 0x00 | ok Fan3B Status | 0x00 | ok Fan4A Status | 0x00 | ok Fan4B Status | 0x00 | ok Fan5A Status | 0x00 | ok Fan5B Status | 0x00 | ok Fan6A Status | 0x00 | ok Fan6B Status | 0x00 | ok Fan7A Status | 0x00 | ok Fan7B Status | 0x00 | ok Fan8A Status | 0x00 | ok Fan8B Status | 0x00 | ok NVDIMM Warning | 0x41 | ok NVDIMM Error | 0x41 | ok NVDIMM Info | 0x00 | ok Dedicated NIC | 0x00 | ok Presence | 0x00 | ok NVDIMM Battery | Not Readable | ns Exhaust Temp | 37 degrees C | ok LT/Flex Addr | 0x00 | ok QPI Link Err | 0x00 | ok TPM Presence | 0x40 | ok CPU Link Info | 0x41 | ok Chipset Info | 0x40 | ok Memory Config | 0x40 | ok POST Pkg Repair | 0x42 | ok Pfault Fail Safe | Not Readable | ns BP2 PG | 0x00 | ok MMIOChipset Info | 0x00 | ok DIMM Media Info | 0x00 | ok DIMMThermal Info | 0x00 | ok CPU Internal Err | 0x00 | ok GPU1 Temp | disabled | ns GPU2 Temp | disabled | ns GPU3 Temp | disabled | ns A1 | 0x00 | ok A2 | 0x00 | ok A3 | 0x00 | ok A4 | 0x00 | ok A5 | 0x00 | ok A6 | 0x00 | ok A7 | 0x00 | ok A8 | 0x00 | ok A9 | 0x00 | ok A10 | 0x00 | ok A11 | 0x00 | ok A12 | 0x00 | ok B1 | 0x00 | ok B2 | 0x00 | ok B3 | 0x00 | ok B4 | 0x00 | ok B5 | 0x00 | ok B6 | 0x00 | ok B7 | 0x00 | ok B8 | 0x00 | ok B9 | 0x00 | ok B10 | 0x00 | ok B11 | 0x00 | ok B12 | 0x00 | ok Therm Config Err | 0x00 | ok VCORE VR | 1.78 Volts | ok VCORE VR | 1.78 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok :: [ 14:17:15 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:17:15 ] :: [ INFO ] :: Loop 8 Complete :: [ 14:17:15 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ BEGIN ] :: Running 'ipmitool sel list' 1 | 01/25/2023 | 09:17:15 AM EST | Event Logging Disabled #0x72 | Log area reset/cleared | Asserted :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 4c4c4544-0042-3910-8039-c6c04f544833 GUID Encoding : SMBIOS (WARNING: IPMI Specification violation!) GUID Version : Name-based using MD5 :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : command Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Sleep Button Disable : not allowed Diag Button Disable : not allowed Reset Button Disable : not allowed Power Button Disable : allowed Sleep Button Disabled: false Diag Button Disabled : false Reset Button Disabled: false Power Button Disabled: false :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:17:16 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 14:17:17 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:17:17 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Loading IANA PEN Registry... Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : Temp (0x1) Entity ID : 3.1 Sensor Type (Threshold) : Temperature Sensor Reading : 38 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Temp (0x2) Entity ID : 3.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Inlet Temp (0x5) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : -7.000 Lower Non-Critical : 3.000 Upper Non-Critical : 43.000 Upper Critical : 47.000 Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : lnc- lcr- unc+ ucr+ Deassertions Enabled : lnc- lcr- unc+ ucr+ Sensor ID : DIMM PG (0x7) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : NDC PG (0x8) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS1 PG FAIL (0x9) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS2 PG FAIL (0xa) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP0 PG (0xb) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP1 PG (0xc) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 1.8V SW PG (0xe) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 2.5V SW PG (0xf) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 5V SW PG (0x10) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PVNN SW PG (0x11) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSB11 SW PG (0x12) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSBM SW PG (0x13) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 3.3V B PG (0x15) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x24) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x25) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x26) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x27) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x28) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x29) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x2a) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x2b) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x2c) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x2e) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x2f) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x30) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x31) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x32) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x33) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x34) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x35) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x36) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : Fan1A (0x38) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan1B (0x40) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2A (0x39) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2B (0x41) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3A (0x3a) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3B (0x42) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Presence (0x48) Entity ID : 10.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x49) Entity ID : 10.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4a) Entity ID : 11.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4b) Entity ID : 11.3 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Intrusion Cable (0x51) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : VGA Cable Pres (0x52) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Presence (0x58) Entity ID : 11.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : BP0 Presence (0x59) Entity ID : 26.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : BP1 Presence (0x5a) Entity ID : 26.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Power Cable (0x5c) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Signal Cable (0x5d) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Power JBP1 (0x5e) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Signal Cable (0x5f) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Power JBP2 (0x60) Entity ID : 26.3 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Presence (0x66) Entity ID : 3.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x67) Entity ID : 3.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Current 1 (0x6b) Entity ID : 10.1 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Current 2 (0x6c) Entity ID : 10.2 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 1 (0x6d) Entity ID : 10.1 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 2 (0x6e) Entity ID : 10.2 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Riser Config Err (0x6f) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : OS Watchdog (0x71) Entity ID : 7.1 Sensor Type (Discrete): Watchdog2 Sensor ID : SEL (0x72) Entity ID : 0.1 Sensor Type (Discrete): Event Logging Disabled Unable to read sensor: Device Not Present Sensor ID : Intrusion (0x73) Entity ID : 7.1 Sensor Type (Discrete): Physical Security Sensor ID : Power Optimized (0x75) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Pwr Consumption (0x76) Entity ID : 7.1 Sensor Type (Threshold) : Current Sensor Reading : 144 (+/- 0) Watts Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 1632.000 Upper Critical : 1800.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertion Events : Assertions Enabled : unc+ ucr+ Deassertions Enabled : unc+ ucr+ Sensor ID : PS Redundancy (0x77) Entity ID : 7.1 Sensor Type (Discrete): Power Supply Unable to read sensor: Device Not Present Sensor ID : Fan Redundancy (0x78) Entity ID : 7.1 Sensor Type (Discrete): Fan States Asserted : Fan [Fully Redundant] Sensor ID : Redundancy (0x79) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD1 (0x7a) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD2 (0x7b) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD (0x7c) Entity ID : 11.4 Sensor Type (Discrete): Module / Board Unable to read sensor: Device Not Present Sensor ID : IO Usage (0x7d) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 0 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : MEM Usage (0x7e) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : SYS Usage (0x7f) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 2 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : CPU Usage (0x80) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 1 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : Status (0x81) Entity ID : 3.1 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x82) Entity ID : 3.2 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x85) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : Status (0x86) Entity ID : 10.2 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : CMOS Battery (0x87) Entity ID : 7.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : ROMB Battery (0x88) Entity ID : 11.2 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : PCIe Slot1 (0x8b) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Sensor ID : PCIe Slot2 (0x8c) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCIe Slot3 (0x8d) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Drive 0 (0x98) Entity ID : 7.1 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : Cable PCIe A0 (0xba) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xbb) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A1 (0xbc) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B1 (0xbd) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A2 (0xbe) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B2 (0xbf) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A0 (0xc0) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS B0 (0xc1) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS A1 (0xc2) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B1 (0xc3) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A2 (0xc4) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B2 (0xc5) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A0 (0xc8) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xc9) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : ECC Corr Err (0x1) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : ECC Uncorr Err (0x2) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : PCI Parity Err (0x4) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCI System Err (0x5) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : SBE Log Disabled (0x6) Entity ID : 34.1 Sensor Type (Discrete): Event Logging Disabled States Asserted : Event Logging Disabled Sensor ID : Unknown (0x8) Entity ID : 34.1 Sensor Type (Discrete): System Event States Asserted : System Event [System Reconfigured] Sensor ID : CPU Machine Chk (0xd) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [Transition to OK] Sensor ID : Memory Spared (0x11) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : Memory Mirrored (0x12) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : PCIE Fatal Err (0x18) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : Chipset Err (0x19) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Err Reg Pointer (0x1a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Mem ECC Warning (0x1b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Transition to Non-recoverable] [Monitor] Sensor ID : POST Err (0x1e) Entity ID : 34.1 Sensor Type (Discrete): System Firmwares Unable to read sensor: Device Not Present Sensor ID : Hdwr version err (0x1f) Entity ID : 34.1 Sensor Type (Discrete): Version Change Unable to read sensor: Device Not Present Sensor ID : Non Fatal PCI Er (0x26) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal IO Error (0x27) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MSR Info Log (0x28) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TXT Status (0x2a) Entity ID : 34.1 Sensor Type (Discrete): OS Critical Stop States Asserted : OS Critical Stop [Error during system startup] Sensor ID : iDPT Mem Fail (0x2b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Correctable ECC] Sensor ID : Additional Info (0x2e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU TDP (0x2f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x30) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x31) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x32) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x33) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Error (0x34) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x35) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x36) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chassis Mismatch (0x37) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change detected] Sensor ID : FatalPCIErrOnBus (0x38) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErBus (0x39) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal PCI SSD Er (0x3a) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalSSDEr (0x3b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPUMachineCheck (0x3c) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [SM BIOS Uncorrectable CPU-complex Error] [Presence detected] Sensor ID : FatalPCIErARI (0x3d) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErARI (0x3e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : FatalPCIExpEr (0x3f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NonFatalPCIExpEr (0x40) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Cable SAS A0 (0xc6) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B0 (0xc7) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Fan4A (0x3b) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan4B (0x43) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5A (0x3c) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5B (0x44) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6A (0x3d) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6B (0x45) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7920 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7A (0x3e) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7B (0x46) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8A (0x3f) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8B (0x47) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Unresp sensor (0xfe) Entity ID : 7.1 Sensor Type (Discrete): Other Sensor ID : CP Left Pres (0x56) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : CP Right Pres (0x57) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : 3.3V A PG (0x14) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x2d) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x37) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : TPM Presence (0x54) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Riser 1 Presence (0x4d) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Riser 2 Presence (0x4e) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Front LED Panel (0x23) Entity ID : 7.1 Sensor Type (Discrete): Management Subsys Health Sensor ID : OS Watchdog Time (0x23) Entity ID : 34.1 Sensor Type (Discrete): Watchdog2 Sensor ID : Fan1A Status (0xe2) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan1B Status (0xe3) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2A Status (0xe4) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2B Status (0xe5) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3A Status (0xe6) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3B Status (0xe7) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4A Status (0xe8) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4B Status (0xe9) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5A Status (0xea) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5B Status (0xeb) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6A Status (0xec) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6B Status (0xed) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7A Status (0xee) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7B Status (0xef) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8A Status (0xf0) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8B Status (0xf1) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Warning (0x46) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Error (0x47) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Info (0x48) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Dedicated NIC (0x70) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4c) Entity ID : 11.4 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : NVDIMM Battery (0x6a) Entity ID : 7.1 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : Exhaust Temp (0x6) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 37 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : 8.000 Upper Non-Critical : 75.000 Upper Critical : 80.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : Sensor ID : LT/Flex Addr (0x25) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPI Link Err (0x29) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TPM Presence (0x41) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change success] Sensor ID : CPU Link Info (0x42) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chipset Info (0x43) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Memory Config (0x44) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : POST Pkg Repair (0x45) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Redundancy Degraded from Fully Redundant] [Redundancy Degraded from Non-Redundant] Sensor ID : Pfault Fail Safe (0x74) Entity ID : 7.1 Sensor Type (Discrete): Voltage Unable to read sensor: Device Not Present Sensor ID : BP2 PG (0xd) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MMIOChipset Info (0x49) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMM Media Info (0x4a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMMThermal Info (0x4b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU Internal Err (0x9) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [IERR] Sensor ID : GPU1 Temp (0x89) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU2 Temp (0x8a) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU3 Temp (0x62) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : A1 (0xca) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : A2 (0xcb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A3 (0xcc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A4 (0xcd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A5 (0xce) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A6 (0xcf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A7 (0xd0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A8 (0xd1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A9 (0xd2) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A10 (0xd3) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A11 (0xd4) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A12 (0xd5) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B1 (0xd6) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : B2 (0xd7) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B3 (0xd8) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B4 (0xd9) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B5 (0xda) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B6 (0xdb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B7 (0xdc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B8 (0xdd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B9 (0xde) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B10 (0xdf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B11 (0xe0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B12 (0xe1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : Therm Config Err (0xfa) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : VCORE VR (0x17) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : VCORE VR (0x18) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1a) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1b) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1c) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1d) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : :: [ 14:17:22 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:17:22 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 32 Device Revision : 1 Firmware Revision : 5.00 IPMI Version : 2.0 Manufacturer ID : 674 Manufacturer Name : Dell Inc. Product ID : 256 (0x0100) Product Name : Unknown (0x100) Device Available : yes Provides Device SDRs : yes Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver Bridge Chassis Device Aux Firmware Rev Info : 0x00 0x01 0x0a 0x14 :: [ 14:17:22 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:17:22 ] :: [ BEGIN ] :: Running 'ipmitool sdr' Temp | 38 degrees C | ok Temp | 35 degrees C | ok Inlet Temp | 30 degrees C | ok DIMM PG | 0x00 | ok NDC PG | 0x00 | ok PS1 PG FAIL | 0x00 | ok PS2 PG FAIL | 0x00 | ok BP0 PG | 0x00 | ok BP1 PG | 0x00 | ok 1.8V SW PG | 0x00 | ok 2.5V SW PG | 0x00 | ok 5V SW PG | 0x00 | ok PVNN SW PG | 0x00 | ok VSB11 SW PG | 0x00 | ok VSBM SW PG | 0x00 | ok 3.3V B PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok Fan1A | 8280 RPM | ok Fan1B | 7680 RPM | ok Fan2A | 8280 RPM | ok Fan2B | 7680 RPM | ok Fan3A | 8280 RPM | ok Fan3B | 7800 RPM | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Intrusion Cable | 0x00 | ok VGA Cable Pres | 0x00 | ok Presence | 0x00 | ok BP0 Presence | 0x00 | ok BP1 Presence | 0x00 | ok Power Cable | Not Readable | ns Signal Cable | Not Readable | ns Power JBP1 | 0x00 | ok Signal Cable | 0x00 | ok Power JBP2 | Not Readable | ns Presence | 0x00 | ok Presence | 0x00 | ok Current 1 | 0.40 Amps | ok Current 2 | 0.40 Amps | ok Voltage 1 | 204 Volts | ok Voltage 2 | 204 Volts | ok Riser Config Err | 0x00 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok Power Optimized | 0x00 | ok Pwr Consumption | 144 Watts | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x00 | ok Redundancy | Not Readable | ns SD1 | Not Readable | ns SD2 | Not Readable | ns SD | Not Readable | ns IO Usage | 0 percent | ok MEM Usage | 3 percent | ok SYS Usage | 2 percent | ok CPU Usage | 1 percent | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok CMOS Battery | 0x00 | ok ROMB Battery | Not Readable | ns PCIe Slot1 | 0x00 | ok PCIe Slot2 | Not Readable | ns PCIe Slot3 | Not Readable | ns Drive 0 | 0x00 | ok Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns Cable PCIe A1 | Not Readable | ns Cable PCIe B1 | Not Readable | ns Cable PCIe A2 | Not Readable | ns Cable PCIe B2 | Not Readable | ns Cable SAS A0 | 0x00 | ok Cable SAS B0 | 0x00 | ok Cable SAS A1 | Not Readable | ns Cable SAS B1 | Not Readable | ns Cable SAS A2 | Not Readable | ns Cable SAS B2 | Not Readable | ns Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns ECC Corr Err | 0xa6 | ok ECC Uncorr Err | 0xa3 | ok PCI Parity Err | Not Readable | ns PCI System Err | 0x9e | ok SBE Log Disabled | 0xa5 | ok Unknown | 0x00 | ok CPU Machine Chk | 0x00 | ok Memory Spared | 0x00 | ok Memory Mirrored | 0x00 | ok PCIE Fatal Err | 0xb2 | ok Chipset Err | Not Readable | ns Err Reg Pointer | 0x7a | ok Mem ECC Warning | 0x7a | ok POST Err | Not Readable | ns Hdwr version err | Not Readable | ns Non Fatal PCI Er | 0x00 | ok Fatal IO Error | 0x00 | ok MSR Info Log | 0x00 | ok TXT Status | 0x00 | ok iDPT Mem Fail | 0x00 | ok Additional Info | 0x00 | ok CPU TDP | 0x00 | ok QPIRC Warning | 0x00 | ok QPIRC Warning | 0x00 | ok Link Warning | 0x00 | ok Link Warning | 0x00 | ok Link Error | 0x00 | ok MRC Warning | 0x00 | ok MRC Warning | 0x00 | ok Chassis Mismatch | 0x00 | ok FatalPCIErrOnBus | 0x45 | ok NonFatalPCIErBus | 0x45 | ok Fatal PCI SSD Er | 0x45 | ok NonFatalSSDEr | 0x45 | ok CPUMachineCheck | 0x45 | ok FatalPCIErARI | 0x45 | ok NonFatalPCIErARI | 0x45 | ok FatalPCIExpEr | 0x45 | ok NonFatalPCIExpEr | 0x40 | ok Cable SAS A0 | Not Readable | ns Cable SAS B0 | Not Readable | ns Fan4A | 8280 RPM | ok Fan4B | 7680 RPM | ok Fan5A | 8160 RPM | ok Fan5B | 7680 RPM | ok Fan6A | 8280 RPM | ok Fan6B | 7920 RPM | ok Fan7A | 8280 RPM | ok Fan7B | 7800 RPM | ok Fan8A | 8280 RPM | ok Fan8B | 7800 RPM | ok Unresp sensor | 0x00 | ok CP Left Pres | 0x00 | ok CP Right Pres | 0x00 | ok 3.3V A PG | 0x00 | ok VSA PG | 0x00 | ok VSA PG | 0x00 | ok TPM Presence | 0x00 | ok Riser 1 Presence | 0x00 | ok Riser 2 Presence | 0x00 | ok Front LED Panel | 0x00 | ok OS Watchdog Time | 0x00 | ok Fan1A Status | 0x00 | ok Fan1B Status | 0x00 | ok Fan2A Status | 0x00 | ok Fan2B Status | 0x00 | ok Fan3A Status | 0x00 | ok Fan3B Status | 0x00 | ok Fan4A Status | 0x00 | ok Fan4B Status | 0x00 | ok Fan5A Status | 0x00 | ok Fan5B Status | 0x00 | ok Fan6A Status | 0x00 | ok Fan6B Status | 0x00 | ok Fan7A Status | 0x00 | ok Fan7B Status | 0x00 | ok Fan8A Status | 0x00 | ok Fan8B Status | 0x00 | ok NVDIMM Warning | 0x41 | ok NVDIMM Error | 0x41 | ok NVDIMM Info | 0x00 | ok Dedicated NIC | 0x00 | ok Presence | 0x00 | ok NVDIMM Battery | Not Readable | ns Exhaust Temp | 37 degrees C | ok LT/Flex Addr | 0x00 | ok QPI Link Err | 0x00 | ok TPM Presence | 0x40 | ok CPU Link Info | 0x41 | ok Chipset Info | 0x40 | ok Memory Config | 0x40 | ok POST Pkg Repair | 0x42 | ok Pfault Fail Safe | Not Readable | ns BP2 PG | 0x00 | ok MMIOChipset Info | 0x00 | ok DIMM Media Info | 0x00 | ok DIMMThermal Info | 0x00 | ok CPU Internal Err | 0x00 | ok GPU1 Temp | disabled | ns GPU2 Temp | disabled | ns GPU3 Temp | disabled | ns A1 | 0x00 | ok A2 | 0x00 | ok A3 | 0x00 | ok A4 | 0x00 | ok A5 | 0x00 | ok A6 | 0x00 | ok A7 | 0x00 | ok A8 | 0x00 | ok A9 | 0x00 | ok A10 | 0x00 | ok A11 | 0x00 | ok A12 | 0x00 | ok B1 | 0x00 | ok B2 | 0x00 | ok B3 | 0x00 | ok B4 | 0x00 | ok B5 | 0x00 | ok B6 | 0x00 | ok B7 | 0x00 | ok B8 | 0x00 | ok B9 | 0x00 | ok B10 | 0x00 | ok B11 | 0x00 | ok B12 | 0x00 | ok Therm Config Err | 0x00 | ok VCORE VR | 1.78 Volts | ok VCORE VR | 1.78 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok :: [ 14:17:27 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:17:27 ] :: [ INFO ] :: Loop 9 Complete :: [ 14:17:27 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 14:17:27 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:17:27 ] :: [ BEGIN ] :: Running 'ipmitool sel list' 1 | 01/25/2023 | 09:17:26 AM EST | Event Logging Disabled #0x72 | Log area reset/cleared | Asserted :: [ 14:17:27 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:17:27 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 14:17:27 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:17:27 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 14:17:27 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:17:27 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:17:27 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:17:28 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 4c4c4544-0042-3910-8039-c6c04f544833 GUID Encoding : SMBIOS (WARNING: IPMI Specification violation!) GUID Version : Name-based using MD5 :: [ 14:17:28 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:17:28 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : disabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : enabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 14:17:28 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:17:28 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : command Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Sleep Button Disable : not allowed Diag Button Disable : not allowed Reset Button Disable : not allowed Power Button Disable : allowed Sleep Button Disabled: false Diag Button Disabled : false Reset Button Disabled: false Power Button Disabled: false :: [ 14:17:28 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:17:28 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 14:17:28 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:17:28 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 14:17:28 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:17:28 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Loading IANA PEN Registry... Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : Temp (0x1) Entity ID : 3.1 Sensor Type (Threshold) : Temperature Sensor Reading : 38 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Temp (0x2) Entity ID : 3.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 90.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : lcr- ucr+ Deassertions Enabled : lcr- ucr+ Sensor ID : Inlet Temp (0x5) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : -7.000 Lower Non-Critical : 3.000 Upper Non-Critical : 43.000 Upper Critical : 47.000 Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : lnc- lcr- unc+ ucr+ Deassertions Enabled : lnc- lcr- unc+ ucr+ Sensor ID : DIMM PG (0x7) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : NDC PG (0x8) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS1 PG FAIL (0x9) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PS2 PG FAIL (0xa) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP0 PG (0xb) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : BP1 PG (0xc) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 1.8V SW PG (0xe) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 2.5V SW PG (0xf) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 5V SW PG (0x10) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : PVNN SW PG (0x11) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSB11 SW PG (0x12) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSBM SW PG (0x13) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : 3.3V B PG (0x15) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x24) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x25) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x26) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x27) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x28) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x29) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x2a) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x2b) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x2c) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VDDQ PG (0x2e) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VPP PG (0x2f) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM012 VTT PG (0x30) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VDDQ PG (0x31) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VPP PG (0x32) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MEM345 VTT PG (0x33) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCCIO PG (0x34) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VCORE PG (0x35) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : FIVR PG (0x36) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : Fan1A (0x38) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan1B (0x40) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2A (0x39) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan2B (0x41) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3A (0x3a) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan3B (0x42) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Presence (0x48) Entity ID : 10.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x49) Entity ID : 10.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4a) Entity ID : 11.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4b) Entity ID : 11.3 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Intrusion Cable (0x51) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : VGA Cable Pres (0x52) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Presence (0x58) Entity ID : 11.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : BP0 Presence (0x59) Entity ID : 26.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : BP1 Presence (0x5a) Entity ID : 26.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Power Cable (0x5c) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Signal Cable (0x5d) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Power JBP1 (0x5e) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Signal Cable (0x5f) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Power JBP2 (0x60) Entity ID : 26.3 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Presence (0x66) Entity ID : 3.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x67) Entity ID : 3.2 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Current 1 (0x6b) Entity ID : 10.1 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Current 2 (0x6c) Entity ID : 10.2 Sensor Type (Threshold) : Current Sensor Reading : 0.400 (+/- 0) Amps Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 1 (0x6d) Entity ID : 10.1 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Voltage 2 (0x6e) Entity ID : 10.2 Sensor Type (Threshold) : Voltage Sensor Reading : 204 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : Riser Config Err (0x6f) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : OS Watchdog (0x71) Entity ID : 7.1 Sensor Type (Discrete): Watchdog2 Sensor ID : SEL (0x72) Entity ID : 0.1 Sensor Type (Discrete): Event Logging Disabled Unable to read sensor: Device Not Present Sensor ID : Intrusion (0x73) Entity ID : 7.1 Sensor Type (Discrete): Physical Security Sensor ID : Power Optimized (0x75) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Pwr Consumption (0x76) Entity ID : 7.1 Sensor Type (Threshold) : Current Sensor Reading : 144 (+/- 0) Watts Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 1632.000 Upper Critical : 1800.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertion Events : Assertions Enabled : unc+ ucr+ Deassertions Enabled : unc+ ucr+ Sensor ID : PS Redundancy (0x77) Entity ID : 7.1 Sensor Type (Discrete): Power Supply Unable to read sensor: Device Not Present Sensor ID : Fan Redundancy (0x78) Entity ID : 7.1 Sensor Type (Discrete): Fan States Asserted : Fan [Fully Redundant] Sensor ID : Redundancy (0x79) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD1 (0x7a) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD2 (0x7b) Entity ID : 11.3 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : SD (0x7c) Entity ID : 11.4 Sensor Type (Discrete): Module / Board Unable to read sensor: Device Not Present Sensor ID : IO Usage (0x7d) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 0 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : MEM Usage (0x7e) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 3 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : SYS Usage (0x7f) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 2 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : CPU Usage (0x80) Entity ID : 7.1 Sensor Type (Threshold) : Other Sensor Reading : 1 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : 101.000 Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 2.000 Negative Hysteresis : 2.000 Assertion Events : Assertions Enabled : unc+ Deassertions Enabled : unc+ Sensor ID : Status (0x81) Entity ID : 3.1 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x82) Entity ID : 3.2 Sensor Type (Discrete): Processor States Asserted : Processor [Presence detected] Sensor ID : Status (0x85) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : Status (0x86) Entity ID : 10.2 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : CMOS Battery (0x87) Entity ID : 7.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : ROMB Battery (0x88) Entity ID : 11.2 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : PCIe Slot1 (0x8b) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Sensor ID : PCIe Slot2 (0x8c) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCIe Slot3 (0x8d) Entity ID : 7.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Drive 0 (0x98) Entity ID : 7.1 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : Cable PCIe A0 (0xba) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xbb) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A1 (0xbc) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B1 (0xbd) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A2 (0xbe) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B2 (0xbf) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A0 (0xc0) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS B0 (0xc1) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Cable SAS A1 (0xc2) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B1 (0xc3) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS A2 (0xc4) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B2 (0xc5) Entity ID : 26.2 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe A0 (0xc8) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable PCIe B0 (0xc9) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : ECC Corr Err (0x1) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : ECC Uncorr Err (0x2) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] [Configuration Error] Sensor ID : PCI Parity Err (0x4) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : PCI System Err (0x5) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : SBE Log Disabled (0x6) Entity ID : 34.1 Sensor Type (Discrete): Event Logging Disabled States Asserted : Event Logging Disabled Sensor ID : Unknown (0x8) Entity ID : 34.1 Sensor Type (Discrete): System Event States Asserted : System Event [System Reconfigured] Sensor ID : CPU Machine Chk (0xd) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [Transition to OK] Sensor ID : Memory Spared (0x11) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : Memory Mirrored (0x12) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Fully Redundant] Sensor ID : PCIE Fatal Err (0x18) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : Chipset Err (0x19) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt Unable to read sensor: Device Not Present Sensor ID : Err Reg Pointer (0x1a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Mem ECC Warning (0x1b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Transition to Non-recoverable] [Monitor] Sensor ID : POST Err (0x1e) Entity ID : 34.1 Sensor Type (Discrete): System Firmwares Unable to read sensor: Device Not Present Sensor ID : Hdwr version err (0x1f) Entity ID : 34.1 Sensor Type (Discrete): Version Change Unable to read sensor: Device Not Present Sensor ID : Non Fatal PCI Er (0x26) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal IO Error (0x27) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MSR Info Log (0x28) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TXT Status (0x2a) Entity ID : 34.1 Sensor Type (Discrete): OS Critical Stop States Asserted : OS Critical Stop [Error during system startup] Sensor ID : iDPT Mem Fail (0x2b) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Correctable ECC] Sensor ID : Additional Info (0x2e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU TDP (0x2f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x30) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPIRC Warning (0x31) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x32) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Warning (0x33) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Link Error (0x34) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x35) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : MRC Warning (0x36) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chassis Mismatch (0x37) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change detected] Sensor ID : FatalPCIErrOnBus (0x38) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErBus (0x39) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Fatal PCI SSD Er (0x3a) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalSSDEr (0x3b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPUMachineCheck (0x3c) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [SM BIOS Uncorrectable CPU-complex Error] [Presence detected] Sensor ID : FatalPCIErARI (0x3d) Entity ID : 34.1 Sensor Type (Discrete): Critical Interrupt States Asserted : Critical Interrupt [EISA failsafe timeout] [Bus Correctable error] Sensor ID : NonFatalPCIErARI (0x3e) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : FatalPCIExpEr (0x3f) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NonFatalPCIExpEr (0x40) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Cable SAS A0 (0xc6) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Cable SAS B0 (0xc7) Entity ID : 26.1 Sensor Type (Discrete): Cable / Interconnect Unable to read sensor: Device Not Present Sensor ID : Fan4A (0x3b) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan4B (0x43) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5A (0x3c) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan5B (0x44) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7680 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6A (0x3d) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan6B (0x45) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7920 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7A (0x3e) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan7B (0x46) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8A (0x3f) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 8280 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Fan8B (0x47) Entity ID : 7.1 Sensor Type (Threshold) : Fan Sensor Reading : 7800 (+/- 120) RPM Status : ok Lower Non-Recoverable : na Lower Critical : 600.000 Lower Non-Critical : 960.000 Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : 120.000 Negative Hysteresis : 120.000 Assertion Events : Assertions Enabled : lnc- lcr- Deassertions Enabled : lnc- lcr- Sensor ID : Unresp sensor (0xfe) Entity ID : 7.1 Sensor Type (Discrete): Other Sensor ID : CP Left Pres (0x56) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : CP Right Pres (0x57) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : 3.3V A PG (0x14) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x2d) Entity ID : 3.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : VSA PG (0x37) Entity ID : 3.2 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : TPM Presence (0x54) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : Riser 1 Presence (0x4d) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Riser 2 Presence (0x4e) Entity ID : 7.1 Sensor Type (Discrete): Cable / Interconnect States Asserted : Cable / Interconnect [Connected] Sensor ID : Front LED Panel (0x23) Entity ID : 7.1 Sensor Type (Discrete): Management Subsys Health Sensor ID : OS Watchdog Time (0x23) Entity ID : 34.1 Sensor Type (Discrete): Watchdog2 Sensor ID : Fan1A Status (0xe2) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan1B Status (0xe3) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2A Status (0xe4) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan2B Status (0xe5) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3A Status (0xe6) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan3B Status (0xe7) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4A Status (0xe8) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan4B Status (0xe9) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5A Status (0xea) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan5B Status (0xeb) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6A Status (0xec) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan6B Status (0xed) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7A Status (0xee) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan7B Status (0xef) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8A Status (0xf0) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : Fan8B Status (0xf1) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Warning (0x46) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Error (0x47) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : NVDIMM Info (0x48) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Dedicated NIC (0x70) Entity ID : 7.1 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Present] Sensor ID : Presence (0x4c) Entity ID : 11.4 Sensor Type (Discrete): Entity Presence States Asserted : Entity Presence [Absent] Sensor ID : NVDIMM Battery (0x6a) Entity ID : 7.1 Sensor Type (Discrete): Battery Unable to read sensor: Device Not Present Sensor ID : Exhaust Temp (0x6) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : 37 (+/- 1) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : 3.000 Lower Non-Critical : 8.000 Upper Non-Critical : 75.000 Upper Critical : 80.000 Upper Non-Recoverable : na Positive Hysteresis : 1.000 Negative Hysteresis : 1.000 Assertion Events : Assertions Enabled : Sensor ID : LT/Flex Addr (0x25) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : QPI Link Err (0x29) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : TPM Presence (0x41) Entity ID : 34.1 Sensor Type (Discrete): Version Change States Asserted : Version Change [Hardware change success] Sensor ID : CPU Link Info (0x42) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Chipset Info (0x43) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : Memory Config (0x44) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : POST Pkg Repair (0x45) Entity ID : 34.1 Sensor Type (Discrete): Memory States Asserted : Memory [Redundancy Degraded from Fully Redundant] [Redundancy Degraded from Non-Redundant] Sensor ID : Pfault Fail Safe (0x74) Entity ID : 7.1 Sensor Type (Discrete): Voltage Unable to read sensor: Device Not Present Sensor ID : BP2 PG (0xd) Entity ID : 7.1 Sensor Type (Discrete): Voltage States Asserted : Voltage [State Deasserted] Sensor ID : MMIOChipset Info (0x49) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMM Media Info (0x4a) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : DIMMThermal Info (0x4b) Entity ID : 34.1 Sensor Type (Discrete): Unknown Sensor ID : CPU Internal Err (0x9) Entity ID : 34.1 Sensor Type (Discrete): Processor States Asserted : Processor [IERR] Sensor ID : GPU1 Temp (0x89) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU2 Temp (0x8a) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : GPU3 Temp (0x62) Entity ID : 7.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertion Events : Assertions Enabled : Sensor ID : A1 (0xca) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : A2 (0xcb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A3 (0xcc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A4 (0xcd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A5 (0xce) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A6 (0xcf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A7 (0xd0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A8 (0xd1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A9 (0xd2) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A10 (0xd3) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A11 (0xd4) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : A12 (0xd5) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B1 (0xd6) Entity ID : 32.1 Sensor Type (Discrete): Memory States Asserted : Memory [Presence Detected] Sensor ID : B2 (0xd7) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B3 (0xd8) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B4 (0xd9) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B5 (0xda) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B6 (0xdb) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B7 (0xdc) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B8 (0xdd) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B9 (0xde) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B10 (0xdf) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B11 (0xe0) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : B12 (0xe1) Entity ID : 32.1 Sensor Type (Discrete): Memory Sensor ID : Therm Config Err (0xfa) Entity ID : 7.1 Sensor Type (Discrete): Unknown Sensor ID : VCORE VR (0x17) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : VCORE VR (0x18) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.780 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1a) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1b) Entity ID : 3.1 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM012 VR (0x1c) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : Sensor ID : MEM345 VR (0x1d) Entity ID : 3.2 Sensor Type (Threshold) : Voltage Sensor Reading : 1.220 (+/- 0) Volts Status : ok Sensor Threshold Settings not available Assertion Events : Assertions Enabled : :: [ 14:17:34 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:17:34 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 32 Device Revision : 1 Firmware Revision : 5.00 IPMI Version : 2.0 Manufacturer ID : 674 Manufacturer Name : Dell Inc. Product ID : 256 (0x0100) Product Name : Unknown (0x100) Device Available : yes Provides Device SDRs : yes Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device IPMB Event Receiver Bridge Chassis Device Aux Firmware Rev Info : 0x00 0x01 0x0a 0x14 :: [ 14:17:34 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:17:34 ] :: [ BEGIN ] :: Running 'ipmitool sdr' Temp | 38 degrees C | ok Temp | 35 degrees C | ok Inlet Temp | 30 degrees C | ok DIMM PG | 0x00 | ok NDC PG | 0x00 | ok PS1 PG FAIL | 0x00 | ok PS2 PG FAIL | 0x00 | ok BP0 PG | 0x00 | ok BP1 PG | 0x00 | ok 1.8V SW PG | 0x00 | ok 2.5V SW PG | 0x00 | ok 5V SW PG | 0x00 | ok PVNN SW PG | 0x00 | ok VSB11 SW PG | 0x00 | ok VSBM SW PG | 0x00 | ok 3.3V B PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok MEM012 VDDQ PG | 0x00 | ok MEM012 VPP PG | 0x00 | ok MEM012 VTT PG | 0x00 | ok MEM345 VDDQ PG | 0x00 | ok MEM345 VPP PG | 0x00 | ok MEM345 VTT PG | 0x00 | ok VCCIO PG | 0x00 | ok VCORE PG | 0x00 | ok FIVR PG | 0x00 | ok Fan1A | 8280 RPM | ok Fan1B | 7680 RPM | ok Fan2A | 8280 RPM | ok Fan2B | 7680 RPM | ok Fan3A | 8280 RPM | ok Fan3B | 7800 RPM | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Presence | 0x00 | ok Intrusion Cable | 0x00 | ok VGA Cable Pres | 0x00 | ok Presence | 0x00 | ok BP0 Presence | 0x00 | ok BP1 Presence | 0x00 | ok Power Cable | Not Readable | ns Signal Cable | Not Readable | ns Power JBP1 | 0x00 | ok Signal Cable | 0x00 | ok Power JBP2 | Not Readable | ns Presence | 0x00 | ok Presence | 0x00 | ok Current 1 | 0.40 Amps | ok Current 2 | 0.40 Amps | ok Voltage 1 | 204 Volts | ok Voltage 2 | 204 Volts | ok Riser Config Err | 0x00 | ok OS Watchdog | 0x00 | ok SEL | Not Readable | ns Intrusion | 0x00 | ok Power Optimized | 0x00 | ok Pwr Consumption | 144 Watts | ok PS Redundancy | Not Readable | ns Fan Redundancy | 0x00 | ok Redundancy | Not Readable | ns SD1 | Not Readable | ns SD2 | Not Readable | ns SD | Not Readable | ns IO Usage | 0 percent | ok MEM Usage | 3 percent | ok SYS Usage | 2 percent | ok CPU Usage | 1 percent | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok Status | 0x00 | ok CMOS Battery | 0x00 | ok ROMB Battery | Not Readable | ns PCIe Slot1 | 0x00 | ok PCIe Slot2 | Not Readable | ns PCIe Slot3 | Not Readable | ns Drive 0 | 0x00 | ok Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns Cable PCIe A1 | Not Readable | ns Cable PCIe B1 | Not Readable | ns Cable PCIe A2 | Not Readable | ns Cable PCIe B2 | Not Readable | ns Cable SAS A0 | 0x00 | ok Cable SAS B0 | 0x00 | ok Cable SAS A1 | Not Readable | ns Cable SAS B1 | Not Readable | ns Cable SAS A2 | Not Readable | ns Cable SAS B2 | Not Readable | ns Cable PCIe A0 | Not Readable | ns Cable PCIe B0 | Not Readable | ns ECC Corr Err | 0xa6 | ok ECC Uncorr Err | 0xa3 | ok PCI Parity Err | Not Readable | ns PCI System Err | 0x9e | ok SBE Log Disabled | 0xa5 | ok Unknown | 0x00 | ok CPU Machine Chk | 0x00 | ok Memory Spared | 0x00 | ok Memory Mirrored | 0x00 | ok PCIE Fatal Err | 0xb2 | ok Chipset Err | Not Readable | ns Err Reg Pointer | 0x7a | ok Mem ECC Warning | 0x7a | ok POST Err | Not Readable | ns Hdwr version err | Not Readable | ns Non Fatal PCI Er | 0x00 | ok Fatal IO Error | 0x00 | ok MSR Info Log | 0x00 | ok TXT Status | 0x00 | ok iDPT Mem Fail | 0x00 | ok Additional Info | 0x00 | ok CPU TDP | 0x00 | ok QPIRC Warning | 0x00 | ok QPIRC Warning | 0x00 | ok Link Warning | 0x00 | ok Link Warning | 0x00 | ok Link Error | 0x00 | ok MRC Warning | 0x00 | ok MRC Warning | 0x00 | ok Chassis Mismatch | 0x00 | ok FatalPCIErrOnBus | 0x45 | ok NonFatalPCIErBus | 0x45 | ok Fatal PCI SSD Er | 0x45 | ok NonFatalSSDEr | 0x45 | ok CPUMachineCheck | 0x45 | ok FatalPCIErARI | 0x45 | ok NonFatalPCIErARI | 0x45 | ok FatalPCIExpEr | 0x45 | ok NonFatalPCIExpEr | 0x40 | ok Cable SAS A0 | Not Readable | ns Cable SAS B0 | Not Readable | ns Fan4A | 8280 RPM | ok Fan4B | 7680 RPM | ok Fan5A | 8280 RPM | ok Fan5B | 7680 RPM | ok Fan6A | 8280 RPM | ok Fan6B | 7920 RPM | ok Fan7A | 8280 RPM | ok Fan7B | 7800 RPM | ok Fan8A | 8280 RPM | ok Fan8B | 7800 RPM | ok Unresp sensor | 0x00 | ok CP Left Pres | 0x00 | ok CP Right Pres | 0x00 | ok 3.3V A PG | 0x00 | ok VSA PG | 0x00 | ok VSA PG | 0x00 | ok TPM Presence | 0x00 | ok Riser 1 Presence | 0x00 | ok Riser 2 Presence | 0x00 | ok Front LED Panel | 0x00 | ok OS Watchdog Time | 0x00 | ok Fan1A Status | 0x00 | ok Fan1B Status | 0x00 | ok Fan2A Status | 0x00 | ok Fan2B Status | 0x00 | ok Fan3A Status | 0x00 | ok Fan3B Status | 0x00 | ok Fan4A Status | 0x00 | ok Fan4B Status | 0x00 | ok Fan5A Status | 0x00 | ok Fan5B Status | 0x00 | ok Fan6A Status | 0x00 | ok Fan6B Status | 0x00 | ok Fan7A Status | 0x00 | ok Fan7B Status | 0x00 | ok Fan8A Status | 0x00 | ok Fan8B Status | 0x00 | ok NVDIMM Warning | 0x41 | ok NVDIMM Error | 0x41 | ok NVDIMM Info | 0x00 | ok Dedicated NIC | 0x00 | ok Presence | 0x00 | ok NVDIMM Battery | Not Readable | ns Exhaust Temp | 37 degrees C | ok LT/Flex Addr | 0x00 | ok QPI Link Err | 0x00 | ok TPM Presence | 0x40 | ok CPU Link Info | 0x41 | ok Chipset Info | 0x40 | ok Memory Config | 0x40 | ok POST Pkg Repair | 0x42 | ok Pfault Fail Safe | Not Readable | ns BP2 PG | 0x00 | ok MMIOChipset Info | 0x00 | ok DIMM Media Info | 0x00 | ok DIMMThermal Info | 0x00 | ok CPU Internal Err | 0x00 | ok GPU1 Temp | disabled | ns GPU2 Temp | disabled | ns GPU3 Temp | disabled | ns A1 | 0x00 | ok A2 | 0x00 | ok A3 | 0x00 | ok A4 | 0x00 | ok A5 | 0x00 | ok A6 | 0x00 | ok A7 | 0x00 | ok A8 | 0x00 | ok A9 | 0x00 | ok A10 | 0x00 | ok A11 | 0x00 | ok A12 | 0x00 | ok B1 | 0x00 | ok B2 | 0x00 | ok B3 | 0x00 | ok B4 | 0x00 | ok B5 | 0x00 | ok B6 | 0x00 | ok B7 | 0x00 | ok B8 | 0x00 | ok B9 | 0x00 | ok B10 | 0x00 | ok B11 | 0x00 | ok B12 | 0x00 | ok Therm Config Err | 0x00 | ok VCORE VR | 1.78 Volts | ok VCORE VR | 1.78 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok MEM012 VR | 1.22 Volts | ok MEM345 VR | 1.22 Volts | ok :: [ 14:17:39 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:17:39 ] :: [ INFO ] :: Loop 10 Complete :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Duration: 129s :: Assertions: 143 good, 0 bad :: RESULT: PASS (Test) ** Test PASS Score:0 Uploading resultoutputfile.log .done :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Test :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: [ 14:17:39 ] :: [ BEGIN ] :: Running 'journalctl -b -p err | grep ipmi > /tmp/error.log' :: [ 14:17:39 ] :: [ PASS ] :: Command 'journalctl -b -p err | grep ipmi > /tmp/error.log' (Expected 0,1, got 1) :: [ 14:17:39 ] :: [ BEGIN ] :: Running 'cat /tmp/error.log' :: [ 14:17:39 ] :: [ PASS ] :: Command 'cat /tmp/error.log' (Expected 0, got 0) :: [ 14:17:39 ] :: [ PASS ] :: File '/tmp/error.log' should not contain 'error|fail|warn' :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Duration: 0s :: Assertions: 3 good, 0 bad :: RESULT: PASS (Test) ** Test PASS Score:0 Uploading resultoutputfile.log .done :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: /kernel/ipmi/stress/ipmitool-loop :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: [ 14:17:39 ] :: [ LOG ] :: Phases fingerprint: GpTeNtEf :: [ 14:17:39 ] :: [ LOG ] :: Asserts fingerprint: soqEEN4+ Uploading journal.xml .done :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Duration: 130s :: Phases: 3 good, 0 bad :: OVERALL RESULT: PASS (/kernel/ipmi/stress/ipmitool-loop) :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: TEST PROTOCOL :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: Test run ID : 8 Package : ipmi beakerlib RPM : beakerlib-1.29.3-1.fc38.noarch Test name : /kernel/ipmi/stress/ipmitool-loop Test started : 2023-01-25 14:15:29 EST Test finished : 2023-01-25 14:17:39 EST Test duration : 130 seconds Distro : Fedora release 38 (Rawhide) Hostname : rdma-qe-36.rdma.lab.eng.rdu2.redhat.com Architecture : unknown CPUs : 32 x Intel(R) Xeon(R) Silver 4208 CPU @ 2.10GHz RAM size : 63878 MB HDD size : 278.74 GB :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Test description :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: PURPOSE of /kernel/ipmi/stress/ipmitool-loop Description: IPMItool loop stress test Author: Rachel Sibley Execute various IPMItool commands in a loop, verify the ipmi driver does not get wedged after so many iterations. :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Setup :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: [ 14:15:30 ] :: [ LOG ] :: Output of 'dmidecode --type 38 > /tmp/dmidecode.log': :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 14:15:30 ] :: [ PASS ] :: Command 'dmidecode --type 38 > /tmp/dmidecode.log' (Expected 0, got 0) :: [ 14:15:30 ] :: [ PASS ] :: Moving on, host is ipmi compatible :: [ 14:15:30 ] :: [ PASS ] :: Command 'modprobe -r ipmi_ssif ipmi_devintf ipmi_poweroff ipmi_watchdog ipmi_si' (Expected 0,1, got 1) :: [ 14:15:30 ] :: [ LOG ] :: Output of 'modprobe ipmi_ssif': :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 14:15:30 ] :: [ PASS ] :: Command 'modprobe ipmi_ssif' (Expected 0,1, got 0) :: [ 14:15:30 ] :: [ LOG ] :: Output of 'modprobe ipmi_devintf': :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 14:15:30 ] :: [ PASS ] :: Command 'modprobe ipmi_devintf' (Expected 0,1, got 0) :: [ 14:15:30 ] :: [ LOG ] :: Output of 'modprobe ipmi_poweroff': :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 14:15:30 ] :: [ PASS ] :: Command 'modprobe ipmi_poweroff' (Expected 0,1, got 0) :: [ 14:15:30 ] :: [ LOG ] :: Output of 'modprobe ipmi_watchdog': :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 14:15:30 ] :: [ PASS ] :: Command 'modprobe ipmi_watchdog' (Expected 0,1, got 0) :: [ 14:15:30 ] :: [ LOG ] :: Output of 'modprobe ipmi_si': :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 14:15:30 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 14:15:30 ] :: [ PASS ] :: Command 'modprobe ipmi_si' (Expected 0,1, got 0) :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Duration: 1s :: Assertions: 8 good, 0 bad :: RESULT: PASS (Setup) :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Test :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:15:31 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:15:32 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:15:32 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:15:37 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:15:37 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:15:42 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:15:42 ] :: [ INFO ] :: Loop 0 Complete :: [ 14:15:42 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:15:42 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:15:43 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:15:49 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:15:49 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:15:54 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:15:54 ] :: [ INFO ] :: Loop 1 Complete :: [ 14:15:54 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:15:54 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:15:54 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:15:55 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:16:01 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:16:01 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:16:05 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ INFO ] :: Loop 2 Complete :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:16:06 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:16:07 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:16:07 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:16:07 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:16:12 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:16:12 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:16:17 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:16:17 ] :: [ INFO ] :: Loop 3 Complete :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:16:18 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:16:24 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:16:24 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:16:29 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:16:29 ] :: [ INFO ] :: Loop 4 Complete :: [ 14:16:29 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:16:29 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:16:29 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:16:29 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:16:30 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:16:30 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:16:30 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:16:30 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:16:30 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:16:30 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:16:35 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:16:36 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:16:40 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:16:40 ] :: [ INFO ] :: Loop 5 Complete :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:16:41 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:16:42 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:16:47 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:16:47 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:16:52 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:16:52 ] :: [ INFO ] :: Loop 6 Complete :: [ 14:16:52 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:16:52 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:16:53 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:16:59 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:16:59 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ INFO ] :: Loop 7 Complete :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:17:04 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:17:05 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:17:05 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:17:05 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:17:10 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:17:10 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:17:15 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:17:15 ] :: [ INFO ] :: Loop 8 Complete :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 14:17:16 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 1) :: [ 14:17:17 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 14:17:22 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 14:17:22 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 14:17:27 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 14:17:27 ] :: [ INFO ] :: Loop 9 Complete :: [ 14:17:27 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 14:17:27 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 14:17:27 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 14:17:27 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 14:17:27 ] :: [ PASS ] :: Command 'ipmitool mc ge