[ 115.890939] systemd-rc-local-generator[12169]: /etc/rc.d/rc.local is not marked executable, skipping. [ 116.022785] systemd-rc-local-generator[12193]: /etc/rc.d/rc.local is not marked executable, skipping. [ 116.801928] systemd-rc-local-generator[12495]: /etc/rc.d/rc.local is not marked executable, skipping. [ 117.620774] Running test [R:13211436 T:7 - Storage - blktests - srp - Kernel: 5.14.0-232.rt14.233.1872_744827333.el9.x86_64] [ 119.520420] run blktests srp/001 at 2023-01-12 00:01:51 [ 119.639674] null_blk: module loaded [ 119.656545] null_blk: disk nullb0 created [ 119.662046] null_blk: disk nullb1 created [ 119.679891] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 119.679891] Please review provided documentation for limitations. [ 119.682275] SoftiWARP attached [ 119.708005] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ff474775ca265000 [ 119.708259] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 119.708260] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 119.708263] scsi host10: scsi_debug: version 0191 [20210520] [ 119.708263] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 119.708540] scsi 10:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 119.708920] sd 10:0:0:0: Attached scsi generic sg1 type 0 [ 119.709001] sd 10:0:0:0: Power-on or device reset occurred [ 119.709049] sd 10:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 119.709061] sd 10:0:0:0: [sdb] Write Protect is off [ 119.709083] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 119.709130] sd 10:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 119.709131] sd 10:0:0:0: [sdb] Enabling DIF Type 3 protection [ 119.709133] sd 10:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 119.709134] sd 10:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 119.728598] sd 10:0:0:0: [sdb] Attached SCSI disk [ 119.901673] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 120.010199] Rounding down aligned max_sectors from 255 to 248 [ 120.019593] Rounding down aligned max_sectors from 255 to 248 [ 120.028276] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 120.029905] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 120.166704] scsi host11: REJ reason 0xffffff98 [ 120.166718] scsi host11: ib_srp: Connection 0/10 to 10.16.222.6 failed [ 120.283087] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 120.294918] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 120.301299] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 120.307256] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 120.313294] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 120.319343] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 120.325374] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 120.331306] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 120.337186] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 120.343038] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 120.348119] scsi host11: SRP.T10:A6BF01FFFE827C05 [ 120.349226] scsi 11:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 120.349801] scsi 11:0:0:0: alua: supports implicit and explicit TPGS [ 120.349805] scsi 11:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 120.350255] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 120.350406] sd 11:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 120.357943] sd 11:0:0:0: alua: transition timeout set to 60 seconds [ 120.357946] sd 11:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 120.357954] sd 11:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 120.357991] sd 11:0:0:0: [sdc] Write Protect is off [ 120.358051] scsi 11:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 120.358064] sd 11:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 120.358096] sd 11:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 120.358098] sd 11:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 120.358534] scsi 11:0:0:2: alua: supports implicit and explicit TPGS [ 120.358537] scsi 11:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 120.358632] scsi 11:0:0:2: Attached scsi generic sg3 type 0 [ 120.359064] sd 11:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 120.359067] scsi 11:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 120.359103] sd 11:0:0:2: [sdd] Write Protect is off [ 120.359173] sd 11:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 120.359207] sd 11:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 120.359209] sd 11:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 120.359532] scsi 11:0:0:1: alua: supports implicit and explicit TPGS [ 120.359535] scsi 11:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 120.360683] sd 11:0:0:1: Attached scsi generic sg4 type 0 [ 120.360983] sd 11:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 120.363699] scsi host12: ib_srp: Already connected to target port with id_ext=a6bf01fffe827c05;ioc_guid=a6bf01fffe827c05;dest=fe80:0000:0000:0000:a6bf:01ff:fe82:7c05 [ 120.364949] sd 11:0:0:1: alua: transition timeout set to 60 seconds [ 120.364951] sd 11:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 120.365029] sd 11:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 120.365067] sd 11:0:0:1: [sde] Write Protect is off [ 120.365138] sd 11:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 120.365170] sd 11:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 120.365171] sd 11:0:0:1: [sde] Optimal transfer size 126976 bytes [ 120.409038] sd 11:0:0:2: alua: transition timeout set to 60 seconds [ 120.409040] sd 11:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 120.409351] sd 11:0:0:1: [sde] Attached SCSI disk [ 120.409377] sd 11:0:0:0: [sdc] Attached SCSI disk [ 120.409458] sd 11:0:0:2: [sdd] Attached SCSI disk [ 120.433705] device-mapper: multipath service-time: version 0.3.0 loaded [ 121.130698] scsi 11:0:0:0: alua: Detached [ 121.188703] sd 11:0:0:2: [sdd] Synchronizing SCSI cache [ 121.214658] scsi 11:0:0:2: alua: Detached [ 121.268964] ib_srpt receiving failed for ioctx 0000000075f8a7fb with status 5 [ 121.268972] ib_srpt receiving failed for ioctx 00000000cc5fbb2b with status 5 [ 121.268988] ib_srpt receiving failed for ioctx 00000000e88d9325 with status 5 [ 121.268990] ib_srpt receiving failed for ioctx 000000001f3cfb89 with status 5 [ 121.269003] ib_srpt receiving failed for ioctx 000000008675ec8f with status 5 [ 121.269005] ib_srpt receiving failed for ioctx 00000000931a24ba with status 5 [ 121.269018] ib_srpt receiving failed for ioctx 000000008c72ec62 with status 5 [ 121.269020] ib_srpt receiving failed for ioctx 00000000efb4f1ed with status 5 [ 121.269032] ib_srpt receiving failed for ioctx 000000001479aa3b with status 5 [ 121.269034] ib_srpt receiving failed for ioctx 00000000f49ea452 with status 5 [ 121.510652] scsi 11:0:0:1: alua: Detached [ 122.926426] sd 10:0:0:0: [sdb] Synchronizing SCSI cache [ 122.982771] SoftiWARP detached [ 123.492375] run blktests srp/005 at 2023-01-12 00:01:55 [ 123.569425] null_blk: module loaded [ 123.583906] null_blk: disk nullb0 created [ 123.588330] null_blk: disk nullb1 created [ 123.604486] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 123.604486] Please review provided documentation for limitations. [ 123.607245] SoftiWARP attached [ 123.632488] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ff474775c9d01000 [ 123.632778] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 123.632780] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 123.632783] scsi host10: scsi_debug: version 0191 [20210520] [ 123.632783] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 123.633162] scsi 10:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 123.633598] sd 10:0:0:0: Attached scsi generic sg1 type 0 [ 123.633693] sd 10:0:0:0: Power-on or device reset occurred [ 123.633732] sd 10:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 123.633744] sd 10:0:0:0: [sdb] Write Protect is off [ 123.633764] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 123.633798] sd 10:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 123.633800] sd 10:0:0:0: [sdb] Enabling DIF Type 3 protection [ 123.633801] sd 10:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 123.633802] sd 10:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 123.651722] sd 10:0:0:0: [sdb] Attached SCSI disk [ 123.754204] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 123.845711] Rounding down aligned max_sectors from 255 to 248 [ 123.854427] Rounding down aligned max_sectors from 255 to 248 [ 123.862508] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 123.863949] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 124.016042] scsi host11: REJ reason 0xffffff98 [ 124.016049] scsi host11: ib_srp: Connection 0/1 to 10.16.222.6 failed [ 124.142467] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 124.153135] scsi host11: ib_srp: Connection 0/1 to 2620:0052:0000:10de:a6bf:01ff:fe82:7c05 failed [ 124.153140] ib_srpt receiving failed for ioctx 0000000057ef9fc6 with status 5 [ 124.153142] ib_srpt receiving failed for ioctx 000000004ecb623f with status 5 [ 124.153146] ib_srpt receiving failed for ioctx 000000001fd11c49 with status 5 [ 124.153146] ib_srpt receiving failed for ioctx 000000001f170d4f with status 5 [ 124.153149] ib_srpt receiving failed for ioctx 000000000400abc4 with status 5 [ 124.153150] ib_srpt receiving failed for ioctx 00000000240a3dae with status 5 [ 124.153153] ib_srpt receiving failed for ioctx 00000000830d24f8 with status 5 [ 124.153154] ib_srpt receiving failed for ioctx 0000000012bf6b1a with status 5 [ 124.153157] ib_srpt receiving failed for ioctx 00000000339c00ae with status 5 [ 124.153157] ib_srpt receiving failed for ioctx 00000000bb8de1e1 with status 5 [ 124.267358] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 124.272237] scsi host11: SRP.T10:A6BF01FFFE827C05 [ 124.272625] scsi 11:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 124.273023] scsi 11:0:0:0: alua: supports implicit and explicit TPGS [ 124.273026] scsi 11:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 124.273169] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 124.273293] sd 11:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 124.276591] sd 11:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 124.276742] sd 11:0:0:0: [sdc] Write Protect is off [ 124.276856] scsi 11:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 124.277035] sd 11:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 124.277125] sd 11:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 124.277126] sd 11:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 124.277428] scsi 11:0:0:2: alua: supports implicit and explicit TPGS [ 124.277431] scsi 11:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 124.277540] scsi 11:0:0:2: Attached scsi generic sg3 type 0 [ 124.277710] scsi 11:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 124.277837] sd 11:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 124.277867] sd 11:0:0:2: [sdd] Write Protect is off [ 124.277928] sd 11:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 124.277955] sd 11:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 124.277956] sd 11:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 124.278099] scsi 11:0:0:1: alua: supports implicit and explicit TPGS [ 124.278101] scsi 11:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 124.278380] sd 11:0:0:0: alua: transition timeout set to 60 seconds [ 124.278383] sd 11:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 124.279310] sd 11:0:0:1: Attached scsi generic sg4 type 0 [ 124.279627] sd 11:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 124.283396] sd 11:0:0:1: alua: transition timeout set to 60 seconds [ 124.283399] sd 11:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 124.283433] sd 11:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 124.283461] sd 11:0:0:1: [sde] Write Protect is off [ 124.283519] sd 11:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 124.283543] sd 11:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 124.283544] sd 11:0:0:1: [sde] Optimal transfer size 126976 bytes [ 124.305683] sd 11:0:0:2: alua: transition timeout set to 60 seconds [ 124.305692] sd 11:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 124.306325] sd 11:0:0:2: [sdd] Attached SCSI disk [ 124.306330] sd 11:0:0:1: [sde] Attached SCSI disk [ 124.306334] sd 11:0:0:0: [sdc] Attached SCSI disk [ 135.230292] scsi 11:0:0:0: alua: Detached [ 135.290338] sd 11:0:0:2: [sdd] Synchronizing SCSI cache [ 135.373307] scsi 11:0:0:1: alua: Detached [ 135.373826] srpt_recv_done: 118 callbacks suppressed [ 135.373828] ib_srpt receiving failed for ioctx 00000000db5edddb with status 5 [ 135.373830] ib_srpt receiving failed for ioctx 00000000cd1c7b8a with status 5 [ 135.373834] ib_srpt receiving failed for ioctx 000000009b9ef503 with status 5 [ 135.373835] ib_srpt receiving failed for ioctx 000000003cd7aff9 with status 5 [ 135.373838] ib_srpt receiving failed for ioctx 00000000a24a35d4 with status 5 [ 135.373839] ib_srpt receiving failed for ioctx 00000000d0bb90c8 with status 5 [ 135.373842] ib_srpt receiving failed for ioctx 0000000054427881 with status 5 [ 135.373843] ib_srpt receiving failed for ioctx 000000000f259e22 with status 5 [ 135.373846] ib_srpt receiving failed for ioctx 00000000a5ebae30 with status 5 [ 135.373847] ib_srpt receiving failed for ioctx 000000008e4a84a8 with status 5 [ 135.616265] scsi 11:0:0:2: alua: Detached [ 136.902161] sd 10:0:0:0: [sdb] Synchronizing SCSI cache [ 136.952382] SoftiWARP detached [ 137.451282] run blktests srp/006 at 2023-01-12 00:02:09 [ 137.523119] null_blk: module loaded [ 137.535871] null_blk: disk nullb0 created [ 137.541693] null_blk: disk nullb1 created [ 137.559362] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 137.559362] Please review provided documentation for limitations. [ 137.562237] SoftiWARP attached [ 137.588168] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ff474775c9cc9000 [ 137.588459] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 137.588460] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 137.588463] scsi host10: scsi_debug: version 0191 [20210520] [ 137.588463] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 137.588752] scsi 10:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 137.589109] sd 10:0:0:0: Attached scsi generic sg1 type 0 [ 137.589204] sd 10:0:0:0: Power-on or device reset occurred [ 137.589247] sd 10:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 137.589259] sd 10:0:0:0: [sdb] Write Protect is off [ 137.589275] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 137.589305] sd 10:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 137.589306] sd 10:0:0:0: [sdb] Enabling DIF Type 3 protection [ 137.589308] sd 10:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 137.589309] sd 10:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 137.607359] sd 10:0:0:0: [sdb] Attached SCSI disk [ 137.711553] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 137.832593] Rounding down aligned max_sectors from 255 to 248 [ 137.841862] Rounding down aligned max_sectors from 255 to 248 [ 137.851949] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 137.853560] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 137.978811] scsi host11: REJ reason 0xffffff98 [ 137.978817] scsi host11: ib_srp: Connection 0/1 to 10.16.222.6 failed [ 138.100924] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 138.111997] scsi host11: SRP.T10:A6BF01FFFE827C05 [ 138.112485] scsi 11:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 138.112867] scsi 11:0:0:0: alua: supports implicit and explicit TPGS [ 138.112870] scsi 11:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 138.113015] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 138.113215] sd 11:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 138.113246] scsi 11:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 138.113608] scsi 11:0:0:2: alua: supports implicit and explicit TPGS [ 138.113610] scsi 11:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 138.113844] scsi 11:0:0:2: Attached scsi generic sg3 type 0 [ 138.114029] scsi 11:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 138.114147] sd 11:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 138.114181] sd 11:0:0:2: [sdd] Write Protect is off [ 138.114246] sd 11:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 138.114273] sd 11:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 138.114274] sd 11:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 138.114441] scsi 11:0:0:1: alua: supports implicit and explicit TPGS [ 138.114444] scsi 11:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 138.115897] sd 11:0:0:1: Attached scsi generic sg4 type 0 [ 138.116057] sd 11:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 138.118026] sd 11:0:0:0: alua: transition timeout set to 60 seconds [ 138.118029] sd 11:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 138.118065] sd 11:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 138.118092] sd 11:0:0:0: [sdc] Write Protect is off [ 138.118143] sd 11:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 138.118165] sd 11:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 138.118166] sd 11:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 138.118632] scsi host12: ib_srp: Already connected to target port with id_ext=a6bf01fffe827c05;ioc_guid=a6bf01fffe827c05;dest=fe80:0000:0000:0000:a6bf:01ff:fe82:7c05 [ 138.121018] sd 11:0:0:1: alua: transition timeout set to 60 seconds [ 138.121020] sd 11:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 138.121055] sd 11:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 138.121081] sd 11:0:0:1: [sde] Write Protect is off [ 138.121132] sd 11:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 138.121154] sd 11:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 138.121155] sd 11:0:0:1: [sde] Optimal transfer size 126976 bytes [ 138.140393] sd 11:0:0:1: [sde] Attached SCSI disk [ 138.141049] sd 11:0:0:2: alua: transition timeout set to 60 seconds [ 138.141051] sd 11:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 138.141256] sd 11:0:0:0: [sdc] Attached SCSI disk [ 138.141291] sd 11:0:0:2: [sdd] Attached SCSI disk [ 149.368903] scsi 11:0:0:0: alua: Detached [ 149.420188] sd 11:0:0:2: [sdd] Synchronizing SCSI cache [ 149.450883] scsi 11:0:0:2: alua: Detached [ 149.495832] ib_srpt receiving failed for ioctx 000000008dc01434 with status 5 [ 149.495835] ib_srpt receiving failed for ioctx 000000001db010d6 with status 5 [ 149.495839] ib_srpt receiving failed for ioctx 00000000c5043182 with status 5 [ 149.495839] ib_srpt receiving failed for ioctx 000000002124ef71 with status 5 [ 149.495842] ib_srpt receiving failed for ioctx 00000000e107b662 with status 5 [ 149.495843] ib_srpt receiving failed for ioctx 00000000d0dc1803 with status 5 [ 149.495846] ib_srpt receiving failed for ioctx 000000000ed9ec1b with status 5 [ 149.495846] ib_srpt receiving failed for ioctx 00000000b8f20aa8 with status 5 [ 149.495849] ib_srpt receiving failed for ioctx 00000000d167776f with status 5 [ 149.495850] ib_srpt receiving failed for ioctx 00000000190bb07e with status 5 [ 149.570889] scsi 11:0:0:1: alua: Detached [ 151.019862] sd 10:0:0:0: [sdb] Synchronizing SCSI cache [ 151.063461] SoftiWARP detached [ 151.560160] run blktests srp/007 at 2023-01-12 00:02:23 [ 151.634901] null_blk: module loaded [ 151.647272] null_blk: disk nullb0 created [ 151.651667] null_blk: disk nullb1 created [ 151.668259] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 151.668259] Please review provided documentation for limitations. [ 151.671084] SoftiWARP attached [ 151.698098] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ff474775c9cc9000 [ 151.698388] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 151.698390] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 151.698393] scsi host10: scsi_debug: version 0191 [20210520] [ 151.698393] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 151.698677] scsi 10:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 151.699020] sd 10:0:0:0: Attached scsi generic sg1 type 0 [ 151.699103] sd 10:0:0:0: Power-on or device reset occurred [ 151.699139] sd 10:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 151.699150] sd 10:0:0:0: [sdb] Write Protect is off [ 151.699167] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 151.699198] sd 10:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 151.699199] sd 10:0:0:0: [sdb] Enabling DIF Type 3 protection [ 151.699201] sd 10:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 151.699202] sd 10:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 151.715812] sd 10:0:0:0: [sdb] Attached SCSI disk [ 151.821167] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 151.948996] Rounding down aligned max_sectors from 255 to 248 [ 151.958726] Rounding down aligned max_sectors from 255 to 248 [ 151.969279] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 151.970896] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 152.107384] scsi host11: REJ reason 0xffffff98 [ 152.107390] scsi host11: ib_srp: Connection 0/1 to 10.16.222.6 failed [ 152.224224] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 152.235424] scsi host11: SRP.T10:A6BF01FFFE827C05 [ 152.235886] scsi 11:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 152.236276] scsi 11:0:0:0: alua: supports implicit and explicit TPGS [ 152.236279] scsi 11:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 152.236744] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 152.236920] sd 11:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 152.240660] sd 11:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 152.240713] sd 11:0:0:0: [sdc] Write Protect is off [ 152.240727] scsi 11:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 152.240770] sd 11:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 152.240806] sd 11:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 152.240807] sd 11:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 152.241107] scsi 11:0:0:2: alua: supports implicit and explicit TPGS [ 152.241109] scsi 11:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 152.241191] sd 11:0:0:2: Attached scsi generic sg3 type 0 [ 152.241333] scsi 11:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 152.241344] sd 11:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 152.241381] sd 11:0:0:2: [sdd] Write Protect is off [ 152.241447] sd 11:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 152.241473] sd 11:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 152.241474] sd 11:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 152.241632] sd 11:0:0:0: alua: transition timeout set to 60 seconds [ 152.241634] sd 11:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 152.241744] scsi 11:0:0:1: alua: supports implicit and explicit TPGS [ 152.241746] scsi 11:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 152.243567] sd 11:0:0:1: Attached scsi generic sg4 type 0 [ 152.243675] sd 11:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 152.246336] scsi host12: ib_srp: Already connected to target port with id_ext=a6bf01fffe827c05;ioc_guid=a6bf01fffe827c05;dest=fe80:0000:0000:0000:a6bf:01ff:fe82:7c05 [ 152.251592] sd 11:0:0:1: alua: transition timeout set to 60 seconds [ 152.251596] sd 11:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 152.251597] sd 11:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 152.251631] sd 11:0:0:1: [sde] Write Protect is off [ 152.251682] sd 11:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 152.251708] sd 11:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 152.251709] sd 11:0:0:1: [sde] Optimal transfer size 126976 bytes [ 152.262666] sd 11:0:0:2: alua: transition timeout set to 60 seconds [ 152.262670] sd 11:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 152.262838] sd 11:0:0:0: [sdc] Attached SCSI disk [ 152.262871] sd 11:0:0:2: [sdd] Attached SCSI disk [ 152.271788] sd 11:0:0:1: [sde] Attached SCSI disk [ 163.269533] scsi 11:0:0:0: alua: Detached [ 163.322349] sd 11:0:0:2: [sdd] Synchronizing SCSI cache [ 163.390183] ib_srpt receiving failed for ioctx 000000007b23d6e0 with status 5 [ 163.390186] ib_srpt receiving failed for ioctx 000000009e7d6eec with status 5 [ 163.390190] ib_srpt receiving failed for ioctx 000000005fdb92c6 with status 5 [ 163.390190] ib_srpt receiving failed for ioctx 000000009314d3e3 with status 5 [ 163.390194] ib_srpt receiving failed for ioctx 000000008982c5ed with status 5 [ 163.390194] ib_srpt receiving failed for ioctx 0000000090a47194 with status 5 [ 163.390197] ib_srpt receiving failed for ioctx 00000000ea389a8b with status 5 [ 163.390198] ib_srpt receiving failed for ioctx 00000000a3b83eeb with status 5 [ 163.390201] ib_srpt receiving failed for ioctx 00000000f91b2817 with status 5 [ 163.390201] ib_srpt receiving failed for ioctx 00000000e5c252b2 with status 5 [ 163.679503] scsi 11:0:0:2: alua: Detached [ 163.695513] scsi 11:0:0:1: alua: Detached [ 164.905083] sd 10:0:0:0: [sdb] Synchronizing SCSI cache [ 164.954801] SoftiWARP detached [ 165.444377] run blktests srp/008 at 2023-01-12 00:02:37 [ 165.517685] null_blk: module loaded [ 165.532133] null_blk: disk nullb0 created [ 165.536522] null_blk: disk nullb1 created [ 165.552749] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 165.552749] Please review provided documentation for limitations. [ 165.555262] SoftiWARP attached [ 165.580339] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ff474775c9ca9000 [ 165.580880] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 165.580882] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 165.580884] scsi host10: scsi_debug: version 0191 [20210520] [ 165.580884] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 165.581149] scsi 10:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 165.581516] sd 10:0:0:0: Attached scsi generic sg1 type 0 [ 165.581683] sd 10:0:0:0: Power-on or device reset occurred [ 165.581723] sd 10:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 165.581739] sd 10:0:0:0: [sdb] Write Protect is off [ 165.581760] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 165.581786] sd 10:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 165.581787] sd 10:0:0:0: [sdb] Enabling DIF Type 3 protection [ 165.581788] sd 10:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 165.581790] sd 10:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 165.607402] sd 10:0:0:0: [sdb] Attached SCSI disk [ 165.711681] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 165.833488] Rounding down aligned max_sectors from 255 to 248 [ 165.842665] Rounding down aligned max_sectors from 255 to 248 [ 165.851897] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 165.854278] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 165.996388] scsi host11: REJ reason 0xffffff98 [ 165.996403] scsi host11: ib_srp: Connection 0/1 to 10.16.222.6 failed [ 166.111392] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 166.122800] scsi host11: SRP.T10:A6BF01FFFE827C05 [ 166.123360] scsi 11:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 166.123858] scsi 11:0:0:0: alua: supports implicit and explicit TPGS [ 166.123861] scsi 11:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 166.124074] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 166.124345] sd 11:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 166.124441] sd 11:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 166.124476] sd 11:0:0:0: [sdc] Write Protect is off [ 166.124561] sd 11:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 166.124588] scsi 11:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 166.124599] sd 11:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 166.124601] sd 11:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 166.125056] scsi 11:0:0:2: alua: supports implicit and explicit TPGS [ 166.125058] scsi 11:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 166.126176] sd 11:0:0:2: Attached scsi generic sg3 type 0 [ 166.126656] scsi 11:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 166.126668] sd 11:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 166.126712] sd 11:0:0:2: [sdd] Write Protect is off [ 166.126788] sd 11:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 166.126819] sd 11:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 166.126820] sd 11:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 166.127131] scsi 11:0:0:1: alua: supports implicit and explicit TPGS [ 166.127134] scsi 11:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 166.128021] sd 11:0:0:1: Attached scsi generic sg4 type 0 [ 166.128213] sd 11:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 166.130264] sd 11:0:0:2: alua: transition timeout set to 60 seconds [ 166.130267] sd 11:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 166.130451] scsi host12: ib_srp: Already connected to target port with id_ext=a6bf01fffe827c05;ioc_guid=a6bf01fffe827c05;dest=fe80:0000:0000:0000:a6bf:01ff:fe82:7c05 [ 166.137267] sd 11:0:0:1: alua: transition timeout set to 60 seconds [ 166.137270] sd 11:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 166.137322] sd 11:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 166.137358] sd 11:0:0:1: [sde] Write Protect is off [ 166.137425] sd 11:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 166.137457] sd 11:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 166.137459] sd 11:0:0:1: [sde] Optimal transfer size 126976 bytes [ 166.149394] sd 11:0:0:0: alua: transition timeout set to 60 seconds [ 166.149398] sd 11:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 166.149487] sd 11:0:0:2: [sdd] Attached SCSI disk [ 166.149633] sd 11:0:0:0: [sdc] Attached SCSI disk [ 166.157523] sd 11:0:0:1: [sde] Attached SCSI disk [ 177.101171] scsi 11:0:0:0: alua: Detached [ 177.151878] sd 11:0:0:2: [sdd] Synchronizing SCSI cache [ 177.233155] scsi 11:0:0:1: alua: Detached [ 177.233862] ib_srpt receiving failed for ioctx 00000000f2e4452a with status 5 [ 177.233870] ib_srpt receiving failed for ioctx 00000000927a8c6b with status 5 [ 177.233885] ib_srpt receiving failed for ioctx 00000000446b326d with status 5 [ 177.233888] ib_srpt receiving failed for ioctx 0000000003d87ec6 with status 5 [ 177.233900] ib_srpt receiving failed for ioctx 00000000f0266f8f with status 5 [ 177.233902] ib_srpt receiving failed for ioctx 000000006fb9f683 with status 5 [ 177.233915] ib_srpt receiving failed for ioctx 00000000a558c6fa with status 5 [ 177.233917] ib_srpt receiving failed for ioctx 00000000c4f0b66f with status 5 [ 177.233929] ib_srpt receiving failed for ioctx 0000000031a8b1eb with status 5 [ 177.233931] ib_srpt receiving failed for ioctx 00000000f6fb588c with status 5 [ 177.569131] scsi 11:0:0:2: alua: Detached [ 178.738796] sd 10:0:0:0: [sdb] Synchronizing SCSI cache [ 178.786559] SoftiWARP detached [ 179.274515] run blktests srp/009 at 2023-01-12 00:02:51 [ 179.350046] null_blk: module loaded [ 179.362467] null_blk: disk nullb0 created [ 179.369483] null_blk: disk nullb1 created [ 179.386049] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 179.386049] Please review provided documentation for limitations. [ 179.388728] SoftiWARP attached [ 179.414181] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ff474775c9ca9000 [ 179.414449] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 179.414450] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 179.414453] scsi host10: scsi_debug: version 0191 [20210520] [ 179.414453] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 179.414765] scsi 10:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 179.415333] sd 10:0:0:0: Attached scsi generic sg1 type 0 [ 179.415555] sd 10:0:0:0: Power-on or device reset occurred [ 179.415597] sd 10:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 179.415615] sd 10:0:0:0: [sdb] Write Protect is off [ 179.415642] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 179.415673] sd 10:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 179.415674] sd 10:0:0:0: [sdb] Enabling DIF Type 3 protection [ 179.415675] sd 10:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 179.415677] sd 10:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 179.432360] sd 10:0:0:0: [sdb] Attached SCSI disk [ 179.535363] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 179.641287] Rounding down aligned max_sectors from 255 to 248 [ 179.651572] Rounding down aligned max_sectors from 255 to 248 [ 179.660421] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 179.662401] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 179.811596] scsi host11: REJ reason 0xffffff98 [ 179.811601] scsi host11: ib_srp: Connection 0/1 to 10.16.222.6 failed [ 179.936602] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 179.947617] scsi host11: SRP.T10:A6BF01FFFE827C05 [ 179.947975] scsi 11:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 179.948375] scsi 11:0:0:0: alua: supports implicit and explicit TPGS [ 179.948377] scsi 11:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 179.948549] scsi 11:0:0:0: Attached scsi generic sg2 type 0 [ 179.948743] scsi 11:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 179.948771] sd 11:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 179.949139] scsi 11:0:0:2: alua: supports implicit and explicit TPGS [ 179.949141] scsi 11:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 179.949388] scsi 11:0:0:2: Attached scsi generic sg3 type 0 [ 179.949616] scsi 11:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 179.949767] sd 11:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 179.949801] sd 11:0:0:2: [sdd] Write Protect is off [ 179.949876] sd 11:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 179.949903] sd 11:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 179.949904] sd 11:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 179.950023] scsi 11:0:0:1: alua: supports implicit and explicit TPGS [ 179.950025] scsi 11:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 179.951377] sd 11:0:0:1: Attached scsi generic sg4 type 0 [ 179.951529] sd 11:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 179.953710] scsi host12: ib_srp: Already connected to target port with id_ext=a6bf01fffe827c05;ioc_guid=a6bf01fffe827c05;dest=fe80:0000:0000:0000:a6bf:01ff:fe82:7c05 [ 179.953896] sd 11:0:0:0: alua: transition timeout set to 60 seconds [ 179.953899] sd 11:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 179.953937] sd 11:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 179.953964] sd 11:0:0:0: [sdc] Write Protect is off [ 179.954014] sd 11:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 179.954037] sd 11:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 179.954038] sd 11:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 179.955899] sd 11:0:0:1: alua: transition timeout set to 60 seconds [ 179.955901] sd 11:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 179.955937] sd 11:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 179.955963] sd 11:0:0:1: [sde] Write Protect is off [ 179.956012] sd 11:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 179.956035] sd 11:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 179.956036] sd 11:0:0:1: [sde] Optimal transfer size 126976 bytes [ 179.974290] sd 11:0:0:0: [sdc] Attached SCSI disk [ 179.974919] sd 11:0:0:2: alua: transition timeout set to 60 seconds [ 179.974921] sd 11:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 179.975101] sd 11:0:0:2: [sdd] Attached SCSI disk [ 179.982055] sd 11:0:0:1: [sde] Attached SCSI disk [ 191.117812] scsi 11:0:0:0: alua: Detached [ 191.168453] sd 11:0:0:2: [sdd] Synchronizing SCSI cache [ 191.236381] ib_srpt receiving failed for ioctx 000000006e6d74dd with status 5 [ 191.236389] ib_srpt receiving failed for ioctx 0000000021821055 with status 5 [ 191.236408] ib_srpt receiving failed for ioctx 000000003a479e81 with status 5 [ 191.236410] ib_srpt receiving failed for ioctx 000000006a0ed00c with status 5 [ 191.236423] ib_srpt receiving failed for ioctx 00000000fa151f76 with status 5 [ 191.236425] ib_srpt receiving failed for ioctx 00000000c02a4e65 with status 5 [ 191.236437] ib_srpt receiving failed for ioctx 00000000ead86966 with status 5 [ 191.236439] ib_srpt receiving failed for ioctx 00000000884e7fd9 with status 5 [ 191.236452] ib_srpt receiving failed for ioctx 0000000026faa4c4 with status 5 [ 191.236453] ib_srpt receiving failed for ioctx 00000000ad62c24a with status 5 [ 191.400771] scsi 11:0:0:2: alua: Detached [ 191.416781] scsi 11:0:0:1: alua: Detached [ 192.761377] sd 10:0:0:0: [sdb] Synchronizing SCSI cache [ 192.808751] SoftiWARP detached [ 193.318526] run blktests srp/010 at 2023-01-12 00:03:05 [ 193.395033] null_blk: module loaded [ 193.408465] null_blk: disk nullb0 created [ 193.412686] null_blk: disk nullb1 created [ 193.429875] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 193.429875] Please review provided documentation for limitations. [ 193.431948] SoftiWARP attached [ 193.457574] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ff474775c9ca9000 [ 193.457856] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 193.457857] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 193.457860] scsi host10: scsi_debug: version 0191 [20210520] [ 193.457860] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 193.458178] scsi 10:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 193.458773] sd 10:0:0:0: Attached scsi generic sg1 type 0 [ 193.458828] sd 10:0:0:0: Power-on or device reset occurred [ 193.458877] sd 10:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 193.458891] sd 10:0:0:0: [sdb] Write Protect is off [ 193.458908] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 193.458937] sd 10:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 193.458939] sd 10:0:0:0: [sdb] Enabling DIF Type 3 protection [ 193.458940] sd 10:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 193.458941] sd 10:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 193.476938] sd 10:0:0:0: [sdb] Attached SCSI disk [ 193.584147] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 193.708360] Rounding down aligned max_sectors from 255 to 248 [ 193.718016] Rounding down aligned max_sectors from 255 to 248 [ 193.725911] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 193.727334] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 193.862754] scsi host11: REJ reason 0xffffff98 [ 193.862760] scsi host11: ib_srp: Connection 0/1 to 10.16.222.6 failed [ 193.986374] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 193.997270] scsi host11: SRP.T10:A6BF01FFFE827C05 [ 193.997796] scsi 11:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 193.998182] scsi 11:0:0:0: alua: supports implicit and explicit TPGS [ 193.998186] scsi 11:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 193.998398] sd 11:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 193.998406] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 194.002568] sd 11:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 194.002598] sd 11:0:0:0: [sdc] Write Protect is off [ 194.002673] sd 11:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 194.002703] scsi 11:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 194.002710] sd 11:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 194.002711] sd 11:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 194.003117] scsi 11:0:0:2: alua: supports implicit and explicit TPGS [ 194.003119] scsi 11:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 194.003189] scsi 11:0:0:2: Attached scsi generic sg3 type 0 [ 194.003349] scsi 11:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 194.003485] sd 11:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 194.003535] sd 11:0:0:2: [sdd] Write Protect is off [ 194.003622] sd 11:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 194.003651] sd 11:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 194.003652] sd 11:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 194.003854] scsi 11:0:0:1: alua: supports implicit and explicit TPGS [ 194.003856] scsi 11:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 194.004510] sd 11:0:0:0: alua: transition timeout set to 60 seconds [ 194.004513] sd 11:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 194.005181] sd 11:0:0:1: Attached scsi generic sg4 type 0 [ 194.005508] sd 11:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 194.007812] scsi host12: ib_srp: Already connected to target port with id_ext=a6bf01fffe827c05;ioc_guid=a6bf01fffe827c05;dest=fe80:0000:0000:0000:a6bf:01ff:fe82:7c05 [ 194.014509] sd 11:0:0:1: alua: transition timeout set to 60 seconds [ 194.014512] sd 11:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 194.014546] sd 11:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 194.014574] sd 11:0:0:1: [sde] Write Protect is off [ 194.014626] sd 11:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 194.014648] sd 11:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 194.014649] sd 11:0:0:1: [sde] Optimal transfer size 126976 bytes [ 194.023710] sd 11:0:0:0: [sdc] Attached SCSI disk [ 194.024539] sd 11:0:0:2: alua: transition timeout set to 60 seconds [ 194.024541] sd 11:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 194.024727] sd 11:0:0:2: [sdd] Attached SCSI disk [ 194.039705] sd 11:0:0:1: [sde] Attached SCSI disk [ 205.147400] scsi 11:0:0:0: alua: Detached [ 205.199553] sd 11:0:0:2: [sdd] Synchronizing SCSI cache [ 205.261433] ib_srpt receiving failed for ioctx 0000000063ed1414 with status 5 [ 205.261436] ib_srpt receiving failed for ioctx 00000000096562fd with status 5 [ 205.261441] ib_srpt receiving failed for ioctx 00000000ffde6bf5 with status 5 [ 205.261441] ib_srpt receiving failed for ioctx 0000000031279fa8 with status 5 [ 205.261444] ib_srpt receiving failed for ioctx 000000004b574355 with status 5 [ 205.261445] ib_srpt receiving failed for ioctx 0000000013415179 with status 5 [ 205.261448] ib_srpt receiving failed for ioctx 000000000f04adbf with status 5 [ 205.261448] ib_srpt receiving failed for ioctx 00000000e8313eec with status 5 [ 205.261451] ib_srpt receiving failed for ioctx 00000000af7d8a8a with status 5 [ 205.261452] ib_srpt receiving failed for ioctx 000000006d7ace53 with status 5 [ 205.453380] scsi 11:0:0:2: alua: Detached [ 205.459390] scsi 11:0:0:1: alua: Detached [ 206.767958] sd 10:0:0:0: [sdb] Synchronizing SCSI cache [ 206.815006] SoftiWARP detached [ 207.311396] run blktests srp/013 at 2023-01-12 00:03:19 [ 207.389012] null_blk: module loaded [ 207.407796] null_blk: disk nullb0 created [ 207.415747] null_blk: disk nullb1 created [ 207.432486] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 207.432486] Please review provided documentation for limitations. [ 207.435642] SoftiWARP attached [ 207.461722] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ff474775c9cf3000 [ 207.461982] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 207.461985] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 207.461987] scsi host10: scsi_debug: version 0191 [20210520] [ 207.461987] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 207.462296] scsi 10:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 207.462605] sd 10:0:0:0: Attached scsi generic sg1 type 0 [ 207.462705] sd 10:0:0:0: Power-on or device reset occurred [ 207.462728] sd 10:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 207.462737] sd 10:0:0:0: [sdb] Write Protect is off [ 207.462753] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 207.462782] sd 10:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 207.462784] sd 10:0:0:0: [sdb] Enabling DIF Type 3 protection [ 207.462785] sd 10:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 207.462786] sd 10:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 207.488525] sd 10:0:0:0: [sdb] Attached SCSI disk [ 207.592626] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 207.721680] Rounding down aligned max_sectors from 255 to 248 [ 207.732264] Rounding down aligned max_sectors from 255 to 248 [ 207.741196] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 207.742762] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 207.876184] scsi host11: REJ reason 0xffffff98 [ 207.876193] scsi host11: ib_srp: Connection 0/10 to 10.16.222.6 failed [ 207.993830] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 208.006446] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 208.012390] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 208.018328] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 208.023795] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 208.029789] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 208.035593] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 208.041380] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 208.047190] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 208.053130] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 208.058239] scsi host11: SRP.T10:A6BF01FFFE827C05 [ 208.059290] scsi 11:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 208.059863] scsi 11:0:0:0: alua: supports implicit and explicit TPGS [ 208.059866] scsi 11:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 208.060193] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 208.060265] sd 11:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 208.060483] sd 11:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 208.060523] sd 11:0:0:0: [sdc] Write Protect is off [ 208.060525] scsi 11:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 208.060598] sd 11:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 208.060630] sd 11:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 208.060631] sd 11:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 208.061117] scsi 11:0:0:2: alua: supports implicit and explicit TPGS [ 208.061119] scsi 11:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 208.062232] sd 11:0:0:2: Attached scsi generic sg3 type 0 [ 208.062703] scsi 11:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 208.062806] sd 11:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 208.062841] sd 11:0:0:2: [sdd] Write Protect is off [ 208.062908] sd 11:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 208.062944] sd 11:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 208.062945] sd 11:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 208.063251] scsi 11:0:0:1: alua: supports implicit and explicit TPGS [ 208.063254] scsi 11:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 208.064662] sd 11:0:0:1: Attached scsi generic sg4 type 0 [ 208.065146] sd 11:0:0:0: alua: transition timeout set to 60 seconds [ 208.065150] sd 11:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 208.065198] sd 11:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 208.066940] scsi host12: ib_srp: Already connected to target port with id_ext=a6bf01fffe827c05;ioc_guid=a6bf01fffe827c05;dest=fe80:0000:0000:0000:a6bf:01ff:fe82:7c05 [ 208.070184] sd 11:0:0:1: alua: transition timeout set to 60 seconds [ 208.070186] sd 11:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 208.070480] sd 11:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 208.070521] sd 11:0:0:1: [sde] Write Protect is off [ 208.070598] sd 11:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 208.070634] sd 11:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 208.070635] sd 11:0:0:1: [sde] Optimal transfer size 126976 bytes [ 208.120265] sd 11:0:0:2: alua: transition timeout set to 60 seconds [ 208.120277] sd 11:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 208.120551] sd 11:0:0:0: [sdc] Attached SCSI disk [ 208.120661] sd 11:0:0:2: [sdd] Attached SCSI disk [ 208.120680] sd 11:0:0:1: [sde] Attached SCSI disk [ 208.849357] sd 11:0:0:2: [sdd] Synchronizing SCSI cache [ 208.931024] scsi 11:0:0:1: alua: Detached [ 208.932040] ib_srpt receiving failed for ioctx 0000000054c3efe7 with status 5 [ 208.932042] ib_srpt receiving failed for ioctx 000000001910e39a with status 5 [ 208.932046] ib_srpt receiving failed for ioctx 0000000026949f65 with status 5 [ 208.932048] ib_srpt receiving failed for ioctx 00000000b5b08717 with status 5 [ 208.932051] ib_srpt receiving failed for ioctx 00000000910225ff with status 5 [ 208.932052] ib_srpt receiving failed for ioctx 00000000d14254ef with status 5 [ 208.932055] ib_srpt receiving failed for ioctx 000000002cb8cba9 with status 5 [ 208.932055] ib_srpt receiving failed for ioctx 000000009db2bc1f with status 5 [ 208.932058] ib_srpt receiving failed for ioctx 00000000f8cdc691 with status 5 [ 208.932059] ib_srpt receiving failed for ioctx 000000009f1d586f with status 5 [ 209.213045] scsi 11:0:0:0: alua: Detached [ 209.229018] scsi 11:0:0:2: alua: Detached [ 210.587133] sd 10:0:0:0: [sdb] Synchronizing SCSI cache [ 210.635941] SoftiWARP detached [ 211.129831] run blktests srp/014 at 2023-01-12 00:03:23 [ 211.204157] null_blk: module loaded [ 211.217732] null_blk: disk nullb0 created [ 211.222345] null_blk: disk nullb1 created [ 211.239603] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 211.239603] Please review provided documentation for limitations. [ 211.242115] SoftiWARP attached [ 211.268616] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ff474775c9d03000 [ 211.268908] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 211.268910] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 211.268913] scsi host10: scsi_debug: version 0191 [20210520] [ 211.268913] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 211.269200] scsi 10:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 211.269508] sd 10:0:0:0: Attached scsi generic sg1 type 0 [ 211.269600] sd 10:0:0:0: Power-on or device reset occurred [ 211.269624] sd 10:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 211.269634] sd 10:0:0:0: [sdb] Write Protect is off [ 211.269649] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 211.269676] sd 10:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 211.269677] sd 10:0:0:0: [sdb] Enabling DIF Type 3 protection [ 211.269678] sd 10:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 211.269680] sd 10:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 211.294106] sd 10:0:0:0: [sdb] Attached SCSI disk [ 211.396368] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 211.503497] Rounding down aligned max_sectors from 255 to 248 [ 211.512615] Rounding down aligned max_sectors from 255 to 248 [ 211.521057] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 211.522619] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 211.664782] scsi host11: REJ reason 0xffffff98 [ 211.664792] scsi host11: ib_srp: Connection 0/10 to 10.16.222.6 failed [ 211.785771] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 211.797969] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 211.803880] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 211.809903] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 211.815765] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 211.821324] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 211.827164] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 211.833109] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 211.839065] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 211.845006] ib_srpt Received SRP_LOGIN_REQ with i_port_id a4bf:0182:7c05:0000:0000:0000:0000:0000, t_port_id a6bf:01ff:fe82:7c05:a6bf:01ff:fe82:7c05 and it_iu_len 8260 on port 1 (guid=a4bf:0182:7c05:0000:0000:0000:0000:0000); pkey 0x00 [ 211.850126] scsi host11: SRP.T10:A6BF01FFFE827C05 [ 211.852319] scsi 11:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 211.853056] scsi 11:0:0:0: alua: supports implicit and explicit TPGS [ 211.853060] scsi 11:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 211.853198] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 211.853749] sd 11:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 211.863027] sd 11:0:0:0: alua: transition timeout set to 60 seconds [ 211.863036] sd 11:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 211.863140] sd 11:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 211.863187] sd 11:0:0:0: [sdc] Write Protect is off [ 211.863212] scsi 11:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 211.863267] sd 11:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 211.863311] sd 11:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 211.863313] sd 11:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 211.863740] scsi 11:0:0:2: alua: supports implicit and explicit TPGS [ 211.863743] scsi 11:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 211.864006] sd 11:0:0:2: Attached scsi generic sg3 type 0 [ 211.864233] scsi 11:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 211.864355] sd 11:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 211.864394] sd 11:0:0:2: [sdd] Write Protect is off [ 211.864471] sd 11:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 211.864507] sd 11:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 211.864508] sd 11:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 211.864715] scsi 11:0:0:1: alua: supports implicit and explicit TPGS [ 211.864717] scsi 11:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 211.866282] sd 11:0:0:1: Attached scsi generic sg4 type 0 [ 211.866684] sd 11:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 211.868972] scsi host12: ib_srp: Already connected to target port with id_ext=a6bf01fffe827c05;ioc_guid=a6bf01fffe827c05;dest=fe80:0000:0000:0000:a6bf:01ff:fe82:7c05 [ 211.870785] sd 11:0:0:1: alua: transition timeout set to 60 seconds [ 211.870789] sd 11:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 211.870863] sd 11:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 211.870899] sd 11:0:0:1: [sde] Write Protect is off [ 211.870967] sd 11:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 211.870998] sd 11:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 211.870999] sd 11:0:0:1: [sde] Optimal transfer size 126976 bytes [ 211.911886] sd 11:0:0:2: alua: transition timeout set to 60 seconds [ 211.911896] sd 11:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 211.912177] sd 11:0:0:0: [sdc] Attached SCSI disk [ 211.912186] sd 11:0:0:2: [sdd] Attached SCSI disk [ 211.912265] sd 11:0:0:1: [sde] Attached SCSI disk [ 213.287869] scsi host11: SRP reset_device called [ 213.288244] sd 11:0:0:0: Power-on or device reset occurred [ 215.296424] scsi host11: SRP reset_device called [ 215.296664] sd 11:0:0:0: Power-on or device reset occurred [ 217.303793] scsi host11: SRP reset_device called [ 217.304089] sd 11:0:0:0: Power-on or device reset occurred [ 219.312059] scsi host11: SRP reset_device called [ 219.312404] sd 11:0:0:0: Power-on or device reset occurred [ 221.319615] scsi host11: SRP reset_device called [ 221.319839] sd 11:0:0:0: Power-on or device reset occurred [ 223.327040] scsi host11: SRP reset_device called [ 223.327097] ------------[ cut here ]------------ [ 223.327098] WARNING: CPU: 106 PID: 30478 at drivers/target/target_core_tmr.c:77 __target_check_io_state+0xf8/0x110 [target_core_mod] [ 223.348248] Modules linked in: ib_srp scsi_transport_srp target_core_user uio target_core_pscsi target_core_file ib_srpt target_core_iblock target_core_mod rdma_cm iw_cm ib_cm scsi_debug siw(X) null_blk dm_service_time ib_umad ib_uverbs dm_multipath ib_core tls rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support ipmi_ssif intel_rapl_common i10nm_edac nfit libnvdimm ast x86_pkg_temp_thermal drm_shmem_helper intel_powerclamp coretemp rapl intel_cstate acpi_ipmi mei_me drm_kms_helper isst_if_mbox_pci isst_if_mmio syscopyarea i2c_i801 sysfillrect intel_uncore sysimgblt pcspkr fb_sys_fops vfat isst_if_common ipmi_si i2c_smbus mei intel_pch_thermal ioatdma intel_vsec ipmi_devintf fat ipmi_msghandler acpi_power_meter acpi_pad fuse drm xfs libcrc32c sd_mod t10_pi sg ahci crct10dif_pclmul crc32_pclmul crc32c_intel ixgbe igb libahci ghash_clmulni_intel libata i2c_algo_bit mdio dca wmi dm_mirror dm_region_hash [ 223.348285] dm_log dm_mod [last unloaded: null_blk] [ 223.439924] CPU: 106 PID: 30478 Comm: kworker/106:7 Kdump: loaded Tainted: G X --------- --- 5.14.0-232.rt14.233.1872_744827333.el9.x86_64 #1 [ 223.453903] Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0020.P21.2012150710 12/15/2020 [ 223.464406] Workqueue: events target_tmr_work [target_core_mod] [ 223.470341] RIP: 0010:__target_check_io_state+0xf8/0x110 [target_core_mod] [ 223.477223] Code: c6 b0 b1 d7 c0 48 c7 c7 50 96 d9 c0 e8 c1 ad e2 c6 eb ce 31 f6 e8 a8 af df c6 44 89 e0 5b 5d 41 5c 41 5d c3 cc cc cc cc 0f 0b <0f> 0b e9 34 ff ff ff 89 c2 eb 85 45 31 e4 eb 97 0f 1f 84 00 00 00 [ 223.495968] RSP: 0018:ff474775c8077da0 EFLAGS: 00010202 [ 223.501192] RAX: 0000000000000282 RBX: ff116acc713004c8 RCX: 0000000000000000 [ 223.508316] RDX: 0000000000000001 RSI: ff116acc657a70e0 RDI: ff116acc713004c8 [ 223.515448] RBP: ff116acc657a70e0 R08: 0000000000000000 R09: ff116acc6928cc74 [ 223.522572] R10: ff116acc71300668 R11: ff116acc5929f8b0 R12: 0000000000000001 [ 223.529702] R13: ff116acc71300668 R14: ff116acc18a997d0 R15: ff116acc713004c8 [ 223.536827] FS: 0000000000000000(0000) GS:ff116acf30180000(0000) knlGS:0000000000000000 [ 223.544911] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 223.550647] CR2: 00007f7d867bd004 CR3: 000000024241a003 CR4: 0000000000771ee0 [ 223.557771] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 223.564894] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 223.572020] PKRU: 55555554 [ 223.574730] Call Trace: [ 223.577176] [ 223.579282] core_tmr_drain_state_list+0x13d/0x320 [target_core_mod] [ 223.585650] ? core_tmr_drain_tmr_list+0x1ad/0x290 [target_core_mod] [ 223.592010] core_tmr_lun_reset+0x7e/0x190 [target_core_mod] [ 223.597678] target_tmr_work+0xb4/0xf0 [target_core_mod] [ 223.603001] process_one_work+0x1e5/0x410 [ 223.607012] worker_thread+0x50/0x3b0 [ 223.610678] ? process_one_work+0x410/0x410 [ 223.614861] kthread+0x103/0x130 [ 223.618096] ? kthread_complete_and_exit+0x20/0x20 [ 223.622887] ret_from_fork+0x1f/0x30 [ 223.626466] [ 223.628651] ---[ end trace b90f6ea83ee2e330 ]--- [ 223.636717] sd 11:0:0:0: Power-on or device reset occurred [ 225.640492] scsi host11: SRP reset_device called [ 225.640709] sd 11:0:0:0: Power-on or device reset occurred [ 227.647991] scsi host11: SRP reset_device called [ 227.648192] sd 11:0:0:0: Power-on or device reset occurred [ 229.655358] scsi host11: SRP reset_device called [ 229.655540] sd 11:0:0:0: Power-on or device reset occurred [ 231.662840] scsi host11: SRP reset_device called [ 231.663021] sd 11:0:0:0: Power-on or device reset occurred [ 233.669680] scsi host11: SRP reset_device called [ 233.670243] sd 11:0:0:0: Power-on or device reset occurred [ 235.677181] scsi host11: SRP reset_device called [ 235.677366] sd 11:0:0:0: Power-on or device reset occurred [ 237.684506] scsi host11: SRP reset_device called [ 237.684841] sd 11:0:0:0: Power-on or device reset occurred [ 239.691907] scsi host11: SRP reset_device called [ 239.692095] sd 11:0:0:0: Power-on or device reset occurred [ 241.699313] scsi host11: SRP reset_device called [ 241.699480] sd 11:0:0:0: Power-on or device reset occurred [ 243.078666] scsi 11:0:0:0: alua: Detached [ 243.130385] sd 11:0:0:2: [sdd] Synchronizing SCSI cache [ 243.163650] scsi 11:0:0:2: alua: Detached [ 243.231648] scsi 11:0:0:1: alua: Detached [ 243.232631] ib_srpt receiving failed for ioctx 0000000060a886a0 with status 5 [ 243.232634] ib_srpt receiving failed for ioctx 00000000282628c8 with status 5 [ 243.232638] ib_srpt receiving failed for ioctx 00000000137068d8 with status 5 [ 243.232639] ib_srpt receiving failed for ioctx 00000000c58d0dea with status 5 [ 243.232642] ib_srpt receiving failed for ioctx 000000004ef12849 with status 5 [ 243.232643] ib_srpt receiving failed for ioctx 0000000043cce9e8 with status 5 [ 243.232646] ib_srpt receiving failed for ioctx 00000000d87a9d01 with status 5 [ 243.232646] ib_srpt receiving failed for ioctx 00000000d2ee573d with status 5 [ 243.232650] ib_srpt receiving failed for ioctx 00000000dde6bde2 with status 5 [ 243.232651] ib_srpt receiving failed for ioctx 00000000a574f0ad with status 5