[ 222.691476] systemd-rc-local-generator[8059]: /etc/rc.d/rc.local is not marked executable, skipping. [ 222.951967] systemd-rc-local-generator[8084]: /etc/rc.d/rc.local is not marked executable, skipping. [ 223.856221] systemd-rc-local-generator[8226]: /etc/rc.d/rc.local is not marked executable, skipping. [ 225.289797] Running test [R:13165876 T:7 - Storage - blktests - srp - Kernel: 5.14.0-226.rt14.227.1742_736206986.el9.x86_64] [ 228.161063] run blktests srp/001 at 2023-01-02 10:56:52 [ 228.355988] null_blk: module loaded [ 228.376286] null_blk: disk nullb0 created [ 228.383110] null_blk: disk nullb1 created [ 228.414595] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 228.414595] Please review provided documentation for limitations. [ 228.415317] SoftiWARP attached [ 228.454922] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ffffb35c83631000 [ 228.455329] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 228.455332] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 228.455337] scsi host4: scsi_debug: version 0191 [20210520] [ 228.455337] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 228.455977] scsi 4:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 228.456398] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 228.456605] sd 4:0:0:0: Power-on or device reset occurred [ 228.456643] sd 4:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 228.456657] sd 4:0:0:0: [sdb] Write Protect is off [ 228.456682] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 228.456722] sd 4:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 228.456724] sd 4:0:0:0: [sdb] Enabling DIF Type 3 protection [ 228.456727] sd 4:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 228.456728] sd 4:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 228.480677] sd 4:0:0:0: [sdb] Attached SCSI disk [ 228.659724] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 228.823463] Rounding down aligned max_sectors from 255 to 248 [ 228.838673] Rounding down aligned max_sectors from 255 to 248 [ 228.854587] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 228.857289] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 229.059890] scsi host5: REJ reason 0xffffff98 [ 229.059905] scsi host5: ib_srp: Connection 0/10 to 10.16.210.236 failed [ 229.179676] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 229.189024] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 229.197054] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 229.205031] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 229.213144] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 229.221153] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 229.229217] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 229.237214] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 229.245217] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 229.253223] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 229.260667] scsi host5: SRP.T10:4ED98FFFFE4863CA [ 229.261992] scsi 5:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 229.263330] scsi 5:0:0:0: alua: supports implicit and explicit TPGS [ 229.263337] scsi 5:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 229.263607] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 229.264001] sd 5:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 229.267655] sd 5:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 229.267738] sd 5:0:0:0: [sdc] Write Protect is off [ 229.267787] scsi 5:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 229.267902] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 229.267978] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 229.267980] sd 5:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 229.268909] scsi 5:0:0:2: alua: supports implicit and explicit TPGS [ 229.268914] scsi 5:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 229.269213] sd 5:0:0:2: Attached scsi generic sg4 type 0 [ 229.269604] sd 5:0:0:0: alua: transition timeout set to 60 seconds [ 229.269609] sd 5:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 229.269806] sd 5:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 229.269876] scsi 5:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 229.269923] sd 5:0:0:2: [sdd] Write Protect is off [ 229.270177] sd 5:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 229.270292] sd 5:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 229.270295] sd 5:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 229.271236] scsi 5:0:0:1: alua: supports implicit and explicit TPGS [ 229.271243] scsi 5:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 229.272594] sd 5:0:0:1: Attached scsi generic sg5 type 0 [ 229.272679] sd 5:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 229.274569] sd 5:0:0:2: alua: transition timeout set to 60 seconds [ 229.274578] sd 5:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 229.276398] scsi host6: ib_srp: Already connected to target port with id_ext=4ed98ffffe4863ca;ioc_guid=4ed98ffffe4863ca;dest=fe80:0000:0000:0000:4ed9:8fff:fe48:63ca [ 229.277558] sd 5:0:0:1: alua: transition timeout set to 60 seconds [ 229.277563] sd 5:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 229.277710] sd 5:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 229.277787] sd 5:0:0:1: [sde] Write Protect is off [ 229.277931] sd 5:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 229.278002] sd 5:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 229.278006] sd 5:0:0:1: [sde] Optimal transfer size 126976 bytes [ 229.327042] sd 5:0:0:1: [sde] Attached SCSI disk [ 229.327095] sd 5:0:0:0: [sdc] Attached SCSI disk [ 229.327189] sd 5:0:0:2: [sdd] Attached SCSI disk [ 229.387317] device-mapper: multipath service-time: version 0.3.0 loaded [ 230.096446] device-mapper: multipath: 253:5: Failing path 8:32. [ 230.155547] sd 5:0:0:2: [sdd] Synchronizing SCSI cache [ 230.189446] scsi 5:0:0:2: alua: Detached [ 230.247414] ib_srpt receiving failed for ioctx 00000000b1d69c05 with status 5 [ 230.247420] ib_srpt receiving failed for ioctx 00000000408696f0 with status 5 [ 230.247462] ib_srpt receiving failed for ioctx 00000000878404d0 with status 5 [ 230.247466] ib_srpt receiving failed for ioctx 00000000ab5807c5 with status 5 [ 230.247480] ib_srpt receiving failed for ioctx 000000005309ec25 with status 5 [ 230.247481] ib_srpt receiving failed for ioctx 00000000152b3858 with status 5 [ 230.247497] ib_srpt receiving failed for ioctx 000000001cb94110 with status 5 [ 230.247499] ib_srpt receiving failed for ioctx 0000000003e088bf with status 5 [ 230.247507] ib_srpt receiving failed for ioctx 0000000095ba0041 with status 5 [ 230.247509] ib_srpt receiving failed for ioctx 00000000a6f93209 with status 5 [ 230.423784] device-mapper: multipath: 253:4: Failing path 8:64. [ 231.219448] scsi 5:0:0:1: alua: Detached [ 231.276063] I/O error, dev dm-5, sector 1 op 0x0:(READ) flags 0x800 phys_seg 1 prio class 2 [ 231.276123] I/O error, dev dm-5, sector 65535 op 0x0:(READ) flags 0x800 phys_seg 1 prio class 2 [ 231.276147] I/O error, dev dm-5, sector 0 op 0x0:(READ) flags 0x800 phys_seg 1 prio class 2 [ 231.276189] I/O error, dev dm-5, sector 1 op 0x0:(READ) flags 0x800 phys_seg 1 prio class 2 [ 231.276212] I/O error, dev dm-5, sector 1 op 0x0:(READ) flags 0x800 phys_seg 1 prio class 2 [ 231.276244] I/O error, dev dm-5, sector 29 op 0x0:(READ) flags 0x800 phys_seg 1 prio class 2 [ 231.276297] I/O error, dev dm-5, sector 0 op 0x0:(READ) flags 0x800 phys_seg 1 prio class 2 [ 231.276317] I/O error, dev dm-5, sector 0 op 0x0:(READ) flags 0x800 phys_seg 1 prio class 2 [ 231.276339] I/O error, dev dm-5, sector 0 op 0x0:(READ) flags 0x800 phys_seg 1 prio class 2 [ 231.331455] scsi 5:0:0:0: alua: Detached [ 232.060629] sd 4:0:0:0: [sdb] Synchronizing SCSI cache [ 232.104120] SoftiWARP detached [ 232.812594] run blktests srp/005 at 2023-01-02 10:56:57 [ 232.928025] null_blk: module loaded [ 232.947950] null_blk: disk nullb0 created [ 232.955260] null_blk: disk nullb1 created [ 232.983582] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 232.983582] Please review provided documentation for limitations. [ 232.984300] SoftiWARP attached [ 233.023122] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ffffb35c83631000 [ 233.023609] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 233.023613] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 233.023618] scsi host4: scsi_debug: version 0191 [20210520] [ 233.023618] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 233.024106] scsi 4:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 233.024654] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 233.024849] sd 4:0:0:0: Power-on or device reset occurred [ 233.024893] sd 4:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 233.024909] sd 4:0:0:0: [sdb] Write Protect is off [ 233.024931] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 233.024967] sd 4:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 233.024970] sd 4:0:0:0: [sdb] Enabling DIF Type 3 protection [ 233.024972] sd 4:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 233.024974] sd 4:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 233.050645] sd 4:0:0:0: [sdb] Attached SCSI disk [ 233.199898] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 233.363738] Rounding down aligned max_sectors from 255 to 248 [ 233.378427] Rounding down aligned max_sectors from 255 to 248 [ 233.393374] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 233.396209] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 233.602765] scsi host5: REJ reason 0xffffff98 [ 233.602782] scsi host5: ib_srp: Connection 0/1 to 10.16.210.236 failed [ 233.730210] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 233.737357] scsi host5: SRP.T10:4ED98FFFFE4863CA [ 233.738363] scsi 5:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 233.739469] scsi 5:0:0:0: alua: supports implicit and explicit TPGS [ 233.739476] scsi 5:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 233.739733] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 233.739872] sd 5:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 233.740167] sd 5:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 233.740292] sd 5:0:0:0: [sdc] Write Protect is off [ 233.740521] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 233.740545] scsi 5:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 233.740598] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 233.740602] sd 5:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 233.742084] scsi 5:0:0:2: alua: supports implicit and explicit TPGS [ 233.742093] scsi 5:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 233.744033] sd 5:0:0:2: Attached scsi generic sg4 type 0 [ 233.744440] sd 5:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 233.744474] scsi 5:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 233.744549] sd 5:0:0:2: [sdd] Write Protect is off [ 233.744742] sd 5:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 233.744803] sd 5:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 233.744806] sd 5:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 233.745732] scsi 5:0:0:1: alua: supports implicit and explicit TPGS [ 233.745737] scsi 5:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 233.746524] sd 5:0:0:0: alua: transition timeout set to 60 seconds [ 233.746531] sd 5:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 233.747547] sd 5:0:0:1: Attached scsi generic sg5 type 0 [ 233.748112] sd 5:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 233.748547] sd 5:0:0:2: alua: transition timeout set to 60 seconds [ 233.748553] sd 5:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 233.751687] scsi host6: ib_srp: Already connected to target port with id_ext=4ed98ffffe4863ca;ioc_guid=4ed98ffffe4863ca;dest=fe80:0000:0000:0000:4ed9:8fff:fe48:63ca [ 233.752560] sd 5:0:0:1: alua: transition timeout set to 60 seconds [ 233.752565] sd 5:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 233.752670] sd 5:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 233.752753] sd 5:0:0:1: [sde] Write Protect is off [ 233.752907] sd 5:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 233.752981] sd 5:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 233.752985] sd 5:0:0:1: [sde] Optimal transfer size 126976 bytes [ 233.769059] sd 5:0:0:0: [sdc] Attached SCSI disk [ 233.769180] sd 5:0:0:2: [sdd] Attached SCSI disk [ 233.779111] sd 5:0:0:1: [sde] Attached SCSI disk [ 244.915419] scsi 5:0:0:0: alua: Detached [ 244.976921] sd 5:0:0:2: [sdd] Synchronizing SCSI cache [ 245.010402] scsi 5:0:0:2: alua: Detached [ 245.072428] scsi 5:0:0:1: alua: Detached [ 245.072804] ib_srpt receiving failed for ioctx 00000000bdc705f6 with status 5 [ 245.072812] ib_srpt receiving failed for ioctx 00000000b6d42e1a with status 5 [ 245.072814] ib_srpt receiving failed for ioctx 00000000de2a332d with status 5 [ 245.072816] ib_srpt receiving failed for ioctx 0000000096b40e51 with status 5 [ 245.072817] ib_srpt receiving failed for ioctx 00000000f12db57a with status 5 [ 245.072819] ib_srpt receiving failed for ioctx 00000000b56d49cd with status 5 [ 245.072820] ib_srpt receiving failed for ioctx 000000000a5ce806 with status 5 [ 245.072821] ib_srpt receiving failed for ioctx 000000003dc703c3 with status 5 [ 245.072823] ib_srpt receiving failed for ioctx 00000000fd0b80a5 with status 5 [ 245.072823] ib_srpt receiving failed for ioctx 000000007dfec4de with status 5 [ 246.561600] sd 4:0:0:0: [sdb] Synchronizing SCSI cache [ 246.606255] SoftiWARP detached [ 247.302628] run blktests srp/006 at 2023-01-02 10:57:11 [ 247.405280] null_blk: module loaded [ 247.424152] null_blk: disk nullb0 created [ 247.431307] null_blk: disk nullb1 created [ 247.458837] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 247.458837] Please review provided documentation for limitations. [ 247.459570] SoftiWARP attached [ 247.495809] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ffffb35c83631000 [ 247.496190] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 247.496193] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 247.496198] scsi host4: scsi_debug: version 0191 [20210520] [ 247.496198] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 247.496753] scsi 4:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 247.497357] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 247.497486] sd 4:0:0:0: Power-on or device reset occurred [ 247.497544] sd 4:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 247.497562] sd 4:0:0:0: [sdb] Write Protect is off [ 247.497593] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 247.497638] sd 4:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 247.497641] sd 4:0:0:0: [sdb] Enabling DIF Type 3 protection [ 247.497644] sd 4:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 247.497647] sd 4:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 247.524590] sd 4:0:0:0: [sdb] Attached SCSI disk [ 247.672560] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 247.838855] Rounding down aligned max_sectors from 255 to 248 [ 247.855075] Rounding down aligned max_sectors from 255 to 248 [ 247.871301] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 247.874064] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 248.081466] scsi host5: REJ reason 0xffffff98 [ 248.081476] scsi host5: ib_srp: Connection 0/1 to 10.16.210.236 failed [ 248.210575] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 248.217937] scsi host5: SRP.T10:4ED98FFFFE4863CA [ 248.218703] scsi 5:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 248.219940] scsi 5:0:0:0: alua: supports implicit and explicit TPGS [ 248.219947] scsi 5:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 248.220145] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 248.220364] sd 5:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 248.225680] sd 5:0:0:0: alua: transition timeout set to 60 seconds [ 248.225685] sd 5:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 248.225687] sd 5:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 248.225819] sd 5:0:0:0: [sdc] Write Protect is off [ 248.225859] scsi 5:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 248.226015] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 248.226117] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 248.226119] sd 5:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 248.227078] scsi 5:0:0:2: alua: supports implicit and explicit TPGS [ 248.227084] scsi 5:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 248.227557] sd 5:0:0:2: Attached scsi generic sg4 type 0 [ 248.227930] scsi 5:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 248.228082] sd 5:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 248.228219] sd 5:0:0:2: [sdd] Write Protect is off [ 248.228437] sd 5:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 248.228517] sd 5:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 248.228520] sd 5:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 248.229235] scsi 5:0:0:1: alua: supports implicit and explicit TPGS [ 248.229240] scsi 5:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 248.231886] sd 5:0:0:1: Attached scsi generic sg5 type 0 [ 248.232272] sd 5:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 248.232554] sd 5:0:0:2: alua: transition timeout set to 60 seconds [ 248.232561] sd 5:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 248.236661] scsi host6: ib_srp: Already connected to target port with id_ext=4ed98ffffe4863ca;ioc_guid=4ed98ffffe4863ca;dest=fe80:0000:0000:0000:4ed9:8fff:fe48:63ca [ 248.238539] sd 5:0:0:1: alua: transition timeout set to 60 seconds [ 248.238546] sd 5:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 248.238644] sd 5:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 248.238728] sd 5:0:0:1: [sde] Write Protect is off [ 248.238883] sd 5:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 248.238957] sd 5:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 248.238960] sd 5:0:0:1: [sde] Optimal transfer size 126976 bytes [ 248.252961] sd 5:0:0:0: [sdc] Attached SCSI disk [ 248.262143] sd 5:0:0:2: [sdd] Attached SCSI disk [ 248.264124] sd 5:0:0:1: [sde] Attached SCSI disk [ 259.435390] scsi 5:0:0:0: alua: Detached [ 259.495834] sd 5:0:0:2: [sdd] Synchronizing SCSI cache [ 259.523381] scsi 5:0:0:2: alua: Detached [ 259.595388] scsi 5:0:0:1: alua: Detached [ 259.595765] ib_srpt receiving failed for ioctx 0000000036845167 with status 5 [ 259.595773] ib_srpt receiving failed for ioctx 00000000b0b2f5fd with status 5 [ 259.595775] ib_srpt receiving failed for ioctx 000000006db2cfd0 with status 5 [ 259.595777] ib_srpt receiving failed for ioctx 0000000031d1d94c with status 5 [ 259.595778] ib_srpt receiving failed for ioctx 00000000c32572ee with status 5 [ 259.595780] ib_srpt receiving failed for ioctx 000000004089ece7 with status 5 [ 259.595781] ib_srpt receiving failed for ioctx 0000000001c326bf with status 5 [ 259.595782] ib_srpt receiving failed for ioctx 000000005527385e with status 5 [ 259.595783] ib_srpt receiving failed for ioctx 000000003017cb0b with status 5 [ 259.595784] ib_srpt receiving failed for ioctx 0000000055d9afe2 with status 5 [ 261.111605] sd 4:0:0:0: [sdb] Synchronizing SCSI cache [ 261.161537] SoftiWARP detached [ 261.861983] run blktests srp/007 at 2023-01-02 10:57:26 [ 261.976870] null_blk: module loaded [ 261.996704] null_blk: disk nullb0 created [ 262.004350] null_blk: disk nullb1 created [ 262.032094] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 262.032094] Please review provided documentation for limitations. [ 262.032836] SoftiWARP attached [ 262.073739] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ffffb35c83631000 [ 262.074217] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 262.074220] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 262.074226] scsi host4: scsi_debug: version 0191 [20210520] [ 262.074226] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 262.074812] scsi 4:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 262.075244] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 262.075328] sd 4:0:0:0: Power-on or device reset occurred [ 262.075380] sd 4:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 262.075401] sd 4:0:0:0: [sdb] Write Protect is off [ 262.075425] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 262.075460] sd 4:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 262.075463] sd 4:0:0:0: [sdb] Enabling DIF Type 3 protection [ 262.075465] sd 4:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 262.075467] sd 4:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 262.096597] sd 4:0:0:0: [sdb] Attached SCSI disk [ 262.248529] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 262.409540] Rounding down aligned max_sectors from 255 to 248 [ 262.425317] Rounding down aligned max_sectors from 255 to 248 [ 262.440920] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 262.443849] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 262.644284] scsi host5: REJ reason 0xffffff98 [ 262.644298] scsi host5: ib_srp: Connection 0/1 to 10.16.210.236 failed [ 262.763755] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 262.771432] scsi host5: SRP.T10:4ED98FFFFE4863CA [ 262.772145] scsi 5:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 262.773241] scsi 5:0:0:0: alua: supports implicit and explicit TPGS [ 262.773249] scsi 5:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 262.773465] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 262.773763] sd 5:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 262.781608] sd 5:0:0:0: alua: transition timeout set to 60 seconds [ 262.781613] sd 5:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 262.781643] sd 5:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 262.781738] sd 5:0:0:0: [sdc] Write Protect is off [ 262.781795] scsi 5:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 262.781922] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 262.781984] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 262.781987] sd 5:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 262.782889] scsi 5:0:0:2: alua: supports implicit and explicit TPGS [ 262.782895] scsi 5:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 262.783120] sd 5:0:0:2: Attached scsi generic sg4 type 0 [ 262.783535] sd 5:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 262.783619] scsi 5:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 262.783640] sd 5:0:0:2: [sdd] Write Protect is off [ 262.783830] sd 5:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 262.783906] sd 5:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 262.783909] sd 5:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 262.784986] scsi 5:0:0:1: alua: supports implicit and explicit TPGS [ 262.784991] scsi 5:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 262.787017] sd 5:0:0:1: Attached scsi generic sg5 type 0 [ 262.788209] sd 5:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 262.789508] sd 5:0:0:2: alua: transition timeout set to 60 seconds [ 262.789514] sd 5:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 262.791353] scsi host6: ib_srp: Already connected to target port with id_ext=4ed98ffffe4863ca;ioc_guid=4ed98ffffe4863ca;dest=fe80:0000:0000:0000:4ed9:8fff:fe48:63ca [ 262.795482] sd 5:0:0:1: alua: transition timeout set to 60 seconds [ 262.795487] sd 5:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 262.795578] sd 5:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 262.795649] sd 5:0:0:1: [sde] Write Protect is off [ 262.795788] sd 5:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 262.795851] sd 5:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 262.795854] sd 5:0:0:1: [sde] Optimal transfer size 126976 bytes [ 262.800894] sd 5:0:0:0: [sdc] Attached SCSI disk [ 262.811079] sd 5:0:0:2: [sdd] Attached SCSI disk [ 262.816910] sd 5:0:0:1: [sde] Attached SCSI disk [ 273.905359] scsi 5:0:0:0: alua: Detached [ 273.962619] sd 5:0:0:2: [sdd] Synchronizing SCSI cache [ 274.027049] ib_srpt receiving failed for ioctx 0000000054d15be2 with status 5 [ 274.027057] ib_srpt receiving failed for ioctx 0000000078f74c34 with status 5 [ 274.027059] ib_srpt receiving failed for ioctx 00000000212c8188 with status 5 [ 274.027060] ib_srpt receiving failed for ioctx 00000000e5356825 with status 5 [ 274.027062] ib_srpt receiving failed for ioctx 00000000a31f91fb with status 5 [ 274.027063] ib_srpt receiving failed for ioctx 000000002bc905bc with status 5 [ 274.027064] ib_srpt receiving failed for ioctx 0000000044ed7210 with status 5 [ 274.027066] ib_srpt receiving failed for ioctx 00000000f6025ccd with status 5 [ 274.027067] ib_srpt receiving failed for ioctx 00000000811cc614 with status 5 [ 274.027068] ib_srpt receiving failed for ioctx 000000009ce221b1 with status 5 [ 274.060365] scsi 5:0:0:2: alua: Detached [ 274.070374] scsi 5:0:0:1: alua: Detached [ 275.552453] sd 4:0:0:0: [sdb] Synchronizing SCSI cache [ 275.597653] SoftiWARP detached [ 276.301979] run blktests srp/008 at 2023-01-02 10:57:40 [ 276.405135] null_blk: module loaded [ 276.423160] null_blk: disk nullb0 created [ 276.430343] null_blk: disk nullb1 created [ 276.458542] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 276.458542] Please review provided documentation for limitations. [ 276.459245] SoftiWARP attached [ 276.494635] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ffffb35c83631000 [ 276.494990] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 276.494993] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 276.494997] scsi host4: scsi_debug: version 0191 [20210520] [ 276.494997] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 276.495416] scsi 4:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 276.495966] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 276.496201] sd 4:0:0:0: Power-on or device reset occurred [ 276.496254] sd 4:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 276.496269] sd 4:0:0:0: [sdb] Write Protect is off [ 276.496291] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 276.496326] sd 4:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 276.496346] sd 4:0:0:0: [sdb] Enabling DIF Type 3 protection [ 276.496349] sd 4:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 276.496351] sd 4:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 276.518583] sd 4:0:0:0: [sdb] Attached SCSI disk [ 276.667102] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 276.834797] Rounding down aligned max_sectors from 255 to 248 [ 276.850275] Rounding down aligned max_sectors from 255 to 248 [ 276.865499] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 276.868028] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 277.056900] scsi host5: REJ reason 0xffffff98 [ 277.056913] scsi host5: ib_srp: Connection 0/1 to 10.16.210.236 failed [ 277.171669] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 277.179404] scsi host5: SRP.T10:4ED98FFFFE4863CA [ 277.180183] scsi 5:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 277.181478] scsi 5:0:0:0: alua: supports implicit and explicit TPGS [ 277.181484] scsi 5:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 277.181655] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 277.181905] sd 5:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 277.189642] sd 5:0:0:0: alua: transition timeout set to 60 seconds [ 277.189646] sd 5:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 277.189650] sd 5:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 277.189751] sd 5:0:0:0: [sdc] Write Protect is off [ 277.189790] scsi 5:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 277.189952] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 277.190050] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 277.190052] sd 5:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 277.191007] scsi 5:0:0:2: alua: supports implicit and explicit TPGS [ 277.191015] scsi 5:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 277.191311] sd 5:0:0:2: Attached scsi generic sg4 type 0 [ 277.191828] sd 5:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 277.191942] sd 5:0:0:2: [sdd] Write Protect is off [ 277.192034] scsi 5:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 277.192231] sd 5:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 277.192370] sd 5:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 277.192372] sd 5:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 277.194174] scsi 5:0:0:1: alua: supports implicit and explicit TPGS [ 277.194180] scsi 5:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 277.194543] sd 5:0:0:1: Attached scsi generic sg5 type 0 [ 277.195037] sd 5:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 277.196521] sd 5:0:0:2: alua: transition timeout set to 60 seconds [ 277.196528] sd 5:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 277.198970] scsi host6: ib_srp: Already connected to target port with id_ext=4ed98ffffe4863ca;ioc_guid=4ed98ffffe4863ca;dest=fe80:0000:0000:0000:4ed9:8fff:fe48:63ca [ 277.199483] sd 5:0:0:1: alua: transition timeout set to 60 seconds [ 277.199488] sd 5:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 277.199589] sd 5:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 277.199665] sd 5:0:0:1: [sde] Write Protect is off [ 277.199808] sd 5:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 277.199878] sd 5:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 277.199881] sd 5:0:0:1: [sde] Optimal transfer size 126976 bytes [ 277.211871] sd 5:0:0:0: [sdc] Attached SCSI disk [ 277.223074] sd 5:0:0:2: [sdd] Attached SCSI disk [ 277.227867] sd 5:0:0:1: [sde] Attached SCSI disk [ 288.326338] scsi 5:0:0:0: alua: Detached [ 288.385563] sd 5:0:0:2: [sdd] Synchronizing SCSI cache [ 288.450223] ib_srpt receiving failed for ioctx 000000000e4e7499 with status 5 [ 288.450229] ib_srpt receiving failed for ioctx 00000000f5893002 with status 5 [ 288.450231] ib_srpt receiving failed for ioctx 0000000046e215e3 with status 5 [ 288.450233] ib_srpt receiving failed for ioctx 00000000de4b3c2b with status 5 [ 288.450234] ib_srpt receiving failed for ioctx 000000002d0717f0 with status 5 [ 288.450236] ib_srpt receiving failed for ioctx 000000006369b4db with status 5 [ 288.450237] ib_srpt receiving failed for ioctx 0000000014de8067 with status 5 [ 288.450239] ib_srpt receiving failed for ioctx 000000005b7aaf23 with status 5 [ 288.450240] ib_srpt receiving failed for ioctx 00000000db8a462a with status 5 [ 288.450240] ib_srpt receiving failed for ioctx 000000003be760e0 with status 5 [ 288.478342] scsi 5:0:0:2: alua: Detached [ 288.494344] scsi 5:0:0:1: alua: Detached [ 289.977568] sd 4:0:0:0: [sdb] Synchronizing SCSI cache [ 290.022003] SoftiWARP detached [ 290.718889] run blktests srp/009 at 2023-01-02 10:57:55 [ 290.832058] null_blk: module loaded [ 290.851686] null_blk: disk nullb0 created [ 290.858933] null_blk: disk nullb1 created [ 290.886661] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 290.886661] Please review provided documentation for limitations. [ 290.887407] SoftiWARP attached [ 290.927690] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ffffb35c83631000 [ 290.928140] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 290.928143] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 290.928148] scsi host4: scsi_debug: version 0191 [20210520] [ 290.928148] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 290.928650] scsi 4:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 290.929126] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 290.929281] sd 4:0:0:0: Power-on or device reset occurred [ 290.929359] sd 4:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 290.929373] sd 4:0:0:0: [sdb] Write Protect is off [ 290.929397] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 290.929434] sd 4:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 290.929437] sd 4:0:0:0: [sdb] Enabling DIF Type 3 protection [ 290.929438] sd 4:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 290.929440] sd 4:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 290.953529] sd 4:0:0:0: [sdb] Attached SCSI disk [ 291.107224] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 291.273110] Rounding down aligned max_sectors from 255 to 248 [ 291.288898] Rounding down aligned max_sectors from 255 to 248 [ 291.303478] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 291.306250] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 291.514807] scsi host5: REJ reason 0xffffff98 [ 291.514823] scsi host5: ib_srp: Connection 0/1 to 10.16.210.236 failed [ 291.642524] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 291.649982] scsi host5: SRP.T10:4ED98FFFFE4863CA [ 291.665397] scsi 5:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 291.677924] scsi 5:0:0:0: alua: supports implicit and explicit TPGS [ 291.677931] scsi 5:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 291.678112] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 291.682408] sd 5:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 291.684746] sd 5:0:0:0: alua: transition timeout set to 60 seconds [ 291.684751] sd 5:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 291.684752] sd 5:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 291.686405] scsi 5:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 291.686428] sd 5:0:0:0: [sdc] Write Protect is off [ 291.692421] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 291.693393] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 291.693397] sd 5:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 291.719431] scsi 5:0:0:2: alua: supports implicit and explicit TPGS [ 291.719437] scsi 5:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 291.719600] sd 5:0:0:2: Attached scsi generic sg4 type 0 [ 291.723473] scsi 5:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 291.723493] sd 5:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 291.725195] sd 5:0:0:2: [sdd] Write Protect is off [ 291.727527] sd 5:0:0:0: [sdc] Attached SCSI disk [ 291.727543] sd 5:0:0:2: alua: transition timeout set to 60 seconds [ 291.727547] sd 5:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 291.728452] sd 5:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 291.729405] sd 5:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 291.729408] sd 5:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 291.746416] scsi 5:0:0:1: alua: supports implicit and explicit TPGS [ 291.746424] scsi 5:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 291.746615] sd 5:0:0:1: Attached scsi generic sg5 type 0 [ 291.747387] sd 5:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 291.750657] scsi host6: ib_srp: Already connected to target port with id_ext=4ed98ffffe4863ca;ioc_guid=4ed98ffffe4863ca;dest=fe80:0000:0000:0000:4ed9:8fff:fe48:63ca [ 291.754652] sd 5:0:0:1: alua: transition timeout set to 60 seconds [ 291.754657] sd 5:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 291.755467] sd 5:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 291.756475] sd 5:0:0:1: [sde] Write Protect is off [ 291.758494] sd 5:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 291.759402] sd 5:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 291.759405] sd 5:0:0:1: [sde] Optimal transfer size 126976 bytes [ 291.760967] sd 5:0:0:2: [sdd] Attached SCSI disk [ 291.792650] sd 5:0:0:1: [sde] Attached SCSI disk [ 303.230303] scsi 5:0:0:0: alua: Detached [ 303.285758] sd 5:0:0:2: [sdd] Synchronizing SCSI cache [ 303.359961] ib_srpt receiving failed for ioctx 00000000a429e2d9 with status 5 [ 303.359968] ib_srpt receiving failed for ioctx 000000004eeec8ad with status 5 [ 303.359970] ib_srpt receiving failed for ioctx 00000000b53d080e with status 5 [ 303.359971] ib_srpt receiving failed for ioctx 000000000fdda8a3 with status 5 [ 303.359973] ib_srpt receiving failed for ioctx 000000008eaaddd2 with status 5 [ 303.359974] ib_srpt receiving failed for ioctx 0000000055d09453 with status 5 [ 303.359976] ib_srpt receiving failed for ioctx 000000000300d341 with status 5 [ 303.359977] ib_srpt receiving failed for ioctx 00000000ded042cb with status 5 [ 303.359978] ib_srpt receiving failed for ioctx 000000007ca75e4a with status 5 [ 303.359979] ib_srpt receiving failed for ioctx 0000000099ef8f69 with status 5 [ 303.856302] scsi 5:0:0:2: alua: Detached [ 303.866318] scsi 5:0:0:1: alua: Detached [ 304.912495] sd 4:0:0:0: [sdb] Synchronizing SCSI cache [ 304.961389] SoftiWARP detached [ 305.661167] run blktests srp/010 at 2023-01-02 10:58:10 [ 305.772732] null_blk: module loaded [ 305.791626] null_blk: disk nullb0 created [ 305.799203] null_blk: disk nullb1 created [ 305.826813] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 305.826813] Please review provided documentation for limitations. [ 305.827570] SoftiWARP attached [ 305.867589] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ffffb35c83631000 [ 305.868030] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 305.868033] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 305.868039] scsi host4: scsi_debug: version 0191 [20210520] [ 305.868039] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 305.868557] scsi 4:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 305.869075] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 305.869153] sd 4:0:0:0: Power-on or device reset occurred [ 305.869190] sd 4:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 305.869203] sd 4:0:0:0: [sdb] Write Protect is off [ 305.869225] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 305.869259] sd 4:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 305.869261] sd 4:0:0:0: [sdb] Enabling DIF Type 3 protection [ 305.869263] sd 4:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 305.869265] sd 4:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 305.893499] sd 4:0:0:0: [sdb] Attached SCSI disk [ 306.049118] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 306.213184] Rounding down aligned max_sectors from 255 to 248 [ 306.229224] Rounding down aligned max_sectors from 255 to 248 [ 306.245761] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 306.248596] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 306.459536] scsi host5: REJ reason 0xffffff98 [ 306.459544] scsi host5: ib_srp: Connection 0/1 to 10.16.210.236 failed [ 306.586545] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 306.594164] scsi host5: SRP.T10:4ED98FFFFE4863CA [ 306.595193] scsi 5:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 306.596350] scsi 5:0:0:0: alua: supports implicit and explicit TPGS [ 306.596358] scsi 5:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 306.596561] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 306.596708] sd 5:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 306.596929] sd 5:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 306.597038] sd 5:0:0:0: [sdc] Write Protect is off [ 306.597111] scsi 5:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 306.597285] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 306.597381] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 306.597384] sd 5:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 306.598298] scsi 5:0:0:2: alua: supports implicit and explicit TPGS [ 306.598303] scsi 5:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 306.600173] sd 5:0:0:2: Attached scsi generic sg4 type 0 [ 306.601046] sd 5:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 306.601204] sd 5:0:0:2: [sdd] Write Protect is off [ 306.601261] scsi 5:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 306.601469] sd 5:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 306.601606] sd 5:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 306.601609] sd 5:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 306.602431] sd 5:0:0:0: alua: transition timeout set to 60 seconds [ 306.602437] sd 5:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 306.602814] scsi 5:0:0:1: alua: supports implicit and explicit TPGS [ 306.602822] scsi 5:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 306.603265] sd 5:0:0:1: Attached scsi generic sg5 type 0 [ 306.603404] sd 5:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 306.604411] sd 5:0:0:2: alua: transition timeout set to 60 seconds [ 306.604417] sd 5:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 306.607387] scsi host6: ib_srp: Already connected to target port with id_ext=4ed98ffffe4863ca;ioc_guid=4ed98ffffe4863ca;dest=fe80:0000:0000:0000:4ed9:8fff:fe48:63ca [ 306.608425] sd 5:0:0:1: alua: transition timeout set to 60 seconds [ 306.608430] sd 5:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 306.608545] sd 5:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 306.608637] sd 5:0:0:1: [sde] Write Protect is off [ 306.608812] sd 5:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 306.608894] sd 5:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 306.608896] sd 5:0:0:1: [sde] Optimal transfer size 126976 bytes [ 306.621854] sd 5:0:0:2: [sdd] Attached SCSI disk [ 306.622772] sd 5:0:0:0: [sdc] Attached SCSI disk [ 306.628821] sd 5:0:0:1: [sde] Attached SCSI disk [ 318.057268] scsi 5:0:0:0: alua: Detached [ 318.118594] sd 5:0:0:2: [sdd] Synchronizing SCSI cache [ 318.191267] scsi 5:0:0:1: alua: Detached [ 318.191628] ib_srpt receiving failed for ioctx 00000000646dfa37 with status 5 [ 318.191633] ib_srpt receiving failed for ioctx 00000000de2a332d with status 5 [ 318.191635] ib_srpt receiving failed for ioctx 000000000ee07531 with status 5 [ 318.191637] ib_srpt receiving failed for ioctx 00000000915b09ae with status 5 [ 318.191639] ib_srpt receiving failed for ioctx 00000000cd4d0296 with status 5 [ 318.191640] ib_srpt receiving failed for ioctx 000000002f131be8 with status 5 [ 318.191641] ib_srpt receiving failed for ioctx 00000000fdda5914 with status 5 [ 318.191642] ib_srpt receiving failed for ioctx 0000000048da5e00 with status 5 [ 318.191643] ib_srpt receiving failed for ioctx 00000000f6094e03 with status 5 [ 318.191644] ib_srpt receiving failed for ioctx 000000007dfec4de with status 5 [ 318.671271] scsi 5:0:0:2: alua: Detached [ 319.706472] sd 4:0:0:0: [sdb] Synchronizing SCSI cache [ 319.752501] SoftiWARP detached [ 320.448160] run blktests srp/013 at 2023-01-02 10:58:24 [ 320.559872] null_blk: module loaded [ 320.580642] null_blk: disk nullb0 created [ 320.587765] null_blk: disk nullb1 created [ 320.615647] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 320.615647] Please review provided documentation for limitations. [ 320.616373] SoftiWARP attached [ 320.655107] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ffffb35c83631000 [ 320.655631] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 320.655634] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 320.655639] scsi host4: scsi_debug: version 0191 [20210520] [ 320.655639] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 320.656164] scsi 4:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 320.656747] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 320.656951] sd 4:0:0:0: Power-on or device reset occurred [ 320.656991] sd 4:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 320.657006] sd 4:0:0:0: [sdb] Write Protect is off [ 320.657027] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 320.657067] sd 4:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 320.657069] sd 4:0:0:0: [sdb] Enabling DIF Type 3 protection [ 320.657071] sd 4:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 320.657073] sd 4:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 320.680476] sd 4:0:0:0: [sdb] Attached SCSI disk [ 320.829550] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 320.993206] Rounding down aligned max_sectors from 255 to 248 [ 321.008589] Rounding down aligned max_sectors from 255 to 248 [ 321.025201] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 321.028368] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 321.233871] scsi host5: REJ reason 0xffffff98 [ 321.233885] scsi host5: ib_srp: Connection 0/10 to 10.16.210.236 failed [ 321.355507] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 321.365591] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 321.373847] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 321.382400] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 321.390524] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 321.398518] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 321.406542] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 321.414518] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 321.422517] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 321.430479] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 321.437921] scsi host5: SRP.T10:4ED98FFFFE4863CA [ 321.440345] scsi 5:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 321.543351] scsi 5:0:0:0: alua: supports implicit and explicit TPGS [ 321.543358] scsi 5:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 321.543530] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 321.544109] sd 5:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 321.546084] sd 5:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 321.546499] sd 5:0:0:0: [sdc] Write Protect is off [ 321.547341] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 321.547417] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 321.547420] sd 5:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 321.565017] scsi 5:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 321.565048] sd 5:0:0:0: alua: transition timeout set to 60 seconds [ 321.565052] sd 5:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 321.588456] sd 5:0:0:0: [sdc] Attached SCSI disk [ 321.596343] scsi 5:0:0:2: alua: supports implicit and explicit TPGS [ 321.596348] scsi 5:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 321.596511] sd 5:0:0:2: Attached scsi generic sg4 type 0 [ 321.598612] scsi 5:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 321.598677] sd 5:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 321.604432] sd 5:0:0:2: alua: transition timeout set to 60 seconds [ 321.604436] sd 5:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 321.604467] sd 5:0:0:2: [sdd] Write Protect is off [ 321.608380] sd 5:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 321.610786] sd 5:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 321.610789] sd 5:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 321.612126] scsi 5:0:0:1: alua: supports implicit and explicit TPGS [ 321.612132] scsi 5:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 321.612368] sd 5:0:0:1: Attached scsi generic sg5 type 0 [ 321.612724] sd 5:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 321.615910] scsi host6: ib_srp: Already connected to target port with id_ext=4ed98ffffe4863ca;ioc_guid=4ed98ffffe4863ca;dest=fe80:0000:0000:0000:4ed9:8fff:fe48:63ca [ 321.617365] sd 5:0:0:1: alua: transition timeout set to 60 seconds [ 321.617370] sd 5:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 321.617521] sd 5:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 321.617604] sd 5:0:0:1: [sde] Write Protect is off [ 321.617759] sd 5:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 321.617829] sd 5:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 321.617831] sd 5:0:0:1: [sde] Optimal transfer size 126976 bytes [ 321.641851] sd 5:0:0:1: [sde] Attached SCSI disk [ 321.644413] sd 5:0:0:2: [sdd] Attached SCSI disk [ 322.759283] scsi 5:0:0:0: alua: Detached [ 322.818480] sd 5:0:0:2: [sdd] Synchronizing SCSI cache [ 322.844252] scsi 5:0:0:2: alua: Detached [ 322.913257] scsi 5:0:0:1: alua: Detached [ 322.914079] ib_srpt receiving failed for ioctx 000000002e81170d with status 5 [ 322.914087] ib_srpt receiving failed for ioctx 00000000f406475d with status 5 [ 322.914089] ib_srpt receiving failed for ioctx 000000006a7e7e27 with status 5 [ 322.914091] ib_srpt receiving failed for ioctx 00000000d9d415af with status 5 [ 322.914094] ib_srpt receiving failed for ioctx 00000000cbc8e026 with status 5 [ 322.914095] ib_srpt receiving failed for ioctx 00000000e8f63159 with status 5 [ 322.914097] ib_srpt receiving failed for ioctx 00000000705e1291 with status 5 [ 322.914098] ib_srpt receiving failed for ioctx 00000000aa12d878 with status 5 [ 322.914100] ib_srpt receiving failed for ioctx 00000000b93f2bd4 with status 5 [ 322.914101] ib_srpt receiving failed for ioctx 00000000a5f260e8 with status 5 [ 324.582479] sd 4:0:0:0: [sdb] Synchronizing SCSI cache [ 324.628020] SoftiWARP detached [ 325.330527] run blktests srp/014 at 2023-01-02 10:58:29 [ 325.444310] null_blk: module loaded [ 325.463604] null_blk: disk nullb0 created [ 325.470950] null_blk: disk nullb1 created [ 325.498973] TECH PREVIEW: Software iWARP Driver may not be fully supported. [ 325.498973] Please review provided documentation for limitations. [ 325.499763] SoftiWARP attached [ 325.539063] scsi_debug:sdebug_add_store: dif_storep 524288 bytes @ ffffb35c83631000 [ 325.539666] scsi_debug:sdebug_driver_probe: scsi_debug: trim poll_queues to 0. poll_q/nr_hw = (0/1) [ 325.539670] scsi_debug:sdebug_driver_probe: host protection DIF3 DIX3 [ 325.539676] scsi host4: scsi_debug: version 0191 [20210520] [ 325.539676] dev_size_mb=32, opts=0x0, submit_queues=1, statistics=0 [ 325.540098] scsi 4:0:0:0: Direct-Access Linux scsi_debug 0191 PQ: 0 ANSI: 7 [ 325.540845] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 325.541306] sd 4:0:0:0: Power-on or device reset occurred [ 325.541362] sd 4:0:0:0: [sdb] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 325.541379] sd 4:0:0:0: [sdb] Write Protect is off [ 325.541402] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 325.541439] sd 4:0:0:0: [sdb] Enabling DIX T10-DIF-TYPE3-CRC, application tag size 6 bytes [ 325.541442] sd 4:0:0:0: [sdb] Enabling DIF Type 3 protection [ 325.541444] sd 4:0:0:0: [sdb] Preferred minimum I/O size 512 bytes [ 325.541446] sd 4:0:0:0: [sdb] Optimal transfer size 524288 bytes [ 325.564452] sd 4:0:0:0: [sdb] Attached SCSI disk [ 325.716204] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 325.877888] Rounding down aligned max_sectors from 255 to 248 [ 325.892768] Rounding down aligned max_sectors from 255 to 248 [ 325.907446] Rounding down aligned max_sectors from 4294967295 to 4294967288 [ 325.910248] iwpm_register_pid: Unable to send a nlmsg (client = 2) [ 326.112218] scsi host5: REJ reason 0xffffff98 [ 326.112279] scsi host5: ib_srp: Connection 0/10 to 10.16.210.236 failed [ 326.227696] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 326.237832] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 326.247379] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 326.255691] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 326.262752] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 326.270889] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 326.278848] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 326.286750] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 326.294730] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 326.302663] ib_srpt Received SRP_LOGIN_REQ with i_port_id 4cd9:8f48:63ca:0000:0000:0000:0000:0000, t_port_id 4ed9:8fff:fe48:63ca:4ed9:8fff:fe48:63ca and it_iu_len 8260 on port 1 (guid=4cd9:8f48:63ca:0000:0000:0000:0000:0000); pkey 0x00 [ 326.309963] scsi host5: SRP.T10:4ED98FFFFE4863CA [ 326.313342] scsi 5:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 326.416066] scsi 5:0:0:0: alua: supports implicit and explicit TPGS [ 326.416075] scsi 5:0:0:0: alua: device naa.60014056e756c6c62300000000000000 port group 0 rel port 1 [ 326.416473] sd 5:0:0:0: Attached scsi generic sg3 type 0 [ 326.416592] sd 5:0:0:0: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 326.417497] sd 5:0:0:0: [sdc] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 326.417596] sd 5:0:0:0: [sdc] Write Protect is off [ 326.417793] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 326.417878] sd 5:0:0:0: [sdc] Preferred minimum I/O size 512 bytes [ 326.417882] sd 5:0:0:0: [sdc] Optimal transfer size 126976 bytes [ 326.437002] sd 5:0:0:0: alua: transition timeout set to 60 seconds [ 326.437008] sd 5:0:0:0: alua: port group 00 state A non-preferred supports TOlUSNA [ 326.437347] scsi 5:0:0:2: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 326.464411] sd 5:0:0:0: [sdc] Attached SCSI disk [ 326.471337] scsi 5:0:0:2: alua: supports implicit and explicit TPGS [ 326.471344] scsi 5:0:0:2: alua: device naa.60014057363736964626700000000000 port group 0 rel port 1 [ 326.471566] sd 5:0:0:2: Attached scsi generic sg4 type 0 [ 326.472514] sd 5:0:0:2: [sdd] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 326.472601] sd 5:0:0:2: [sdd] Write Protect is off [ 326.472761] sd 5:0:0:2: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 326.472833] sd 5:0:0:2: [sdd] Preferred minimum I/O size 512 bytes [ 326.472835] sd 5:0:0:2: [sdd] Optimal transfer size 524288 bytes [ 326.476432] scsi 5:0:0:1: Direct-Access LIO-ORG IBLOCK 4.0 PQ: 0 ANSI: 6 [ 326.501464] sd 5:0:0:2: alua: transition timeout set to 60 seconds [ 326.501469] sd 5:0:0:2: alua: port group 00 state A non-preferred supports TOlUSNA [ 326.501851] sd 5:0:0:2: [sdd] Attached SCSI disk [ 326.504082] scsi 5:0:0:1: alua: supports implicit and explicit TPGS [ 326.504090] scsi 5:0:0:1: alua: device naa.60014056e756c6c62310000000000000 port group 0 rel port 1 [ 326.504334] sd 5:0:0:1: Attached scsi generic sg5 type 0 [ 326.504656] sd 5:0:0:1: LUN assignments on this target have changed. The Linux SCSI layer does not automatically remap LUN assignments. [ 326.508141] scsi host6: ib_srp: Already connected to target port with id_ext=4ed98ffffe4863ca;ioc_guid=4ed98ffffe4863ca;dest=fe80:0000:0000:0000:4ed9:8fff:fe48:63ca [ 326.515388] sd 5:0:0:1: alua: transition timeout set to 60 seconds [ 326.515394] sd 5:0:0:1: alua: port group 00 state A non-preferred supports TOlUSNA [ 326.515396] sd 5:0:0:1: [sde] 65536 512-byte logical blocks: (33.6 MB/32.0 MiB) [ 326.515498] sd 5:0:0:1: [sde] Write Protect is off [ 326.515662] sd 5:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 326.515736] sd 5:0:0:1: [sde] Preferred minimum I/O size 512 bytes [ 326.515739] sd 5:0:0:1: [sde] Optimal transfer size 126976 bytes [ 326.541416] sd 5:0:0:1: [sde] Attached SCSI disk [ 327.726719] scsi host5: SRP reset_device called [ 327.726961] sd 5:0:0:0: Power-on or device reset occurred [ 329.741426] scsi host5: SRP reset_device called [ 329.741872] sd 5:0:0:0: Power-on or device reset occurred [ 331.755213] scsi host5: SRP reset_device called [ 331.755330] ------------[ cut here ]------------ [ 331.755332] WARNING: CPU: 30 PID: 314 at drivers/target/target_core_tmr.c:77 __target_check_io_state+0xf8/0x110 [target_core_mod] [ 331.776170] Modules linked in: ib_srp scsi_transport_srp target_core_user uio target_core_pscsi target_core_file ib_srpt target_core_iblock target_core_mod rdma_cm iw_cm ib_cm scsi_debug siw(X) null_blk dm_service_time ib_umad ib_uverbs dm_multipath ib_core tls rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs rfkill sunrpc intel_rapl_msr dcdbas intel_rapl_common amd64_edac edac_mce_amd rapl pcspkr mgag200 i2c_algo_bit ipmi_ssif drm_shmem_helper drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops acpi_ipmi k10temp i2c_piix4 ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter vfat fat drm fuse xfs libcrc32c sd_mod t10_pi sg ahci libahci crct10dif_pclmul crc32_pclmul crc32c_intel libata ghash_clmulni_intel tg3 ccp sp5100_tco dm_mirror dm_region_hash dm_log dm_mod [last unloaded: null_blk] [ 331.849082] CPU: 30 PID: 314 Comm: kworker/30:1 Kdump: loaded Tainted: G X --------- --- 5.14.0-226.rt14.227.1742_736206986.el9.x86_64 #1 [ 331.862725] Hardware name: Dell Inc. PowerEdge R7415/07YXFK, BIOS 1.18.0 01/17/2022 [ 331.870376] Workqueue: events target_tmr_work [target_core_mod] [ 331.876322] RIP: 0010:__target_check_io_state+0xf8/0x110 [target_core_mod] [ 331.883222] Code: c6 b0 a1 73 c1 48 c7 c7 50 86 75 c1 e8 c1 d9 a6 c6 eb ce 31 f6 e8 a8 db a3 c6 44 89 e0 5b 5d 41 5c 41 5d e9 fa f4 2e c7 0f 0b <0f> 0b e9 34 ff ff ff 89 c2 eb 85 45 31 e4 eb 97 0f 1f 84 00 00 00 [ 331.901974] RSP: 0018:ffffb35c8115bda0 EFLAGS: 00010202 [ 331.907199] RAX: 0000000000000286 RBX: ffff9bf626a8e8c8 RCX: 0000000000000000 [ 331.914332] RDX: 0000000000000001 RSI: ffff9bf6c2293540 RDI: ffff9bf626a8e8c8 [ 331.921466] RBP: ffff9bf6c2293540 R08: 0000000000000000 R09: ffff9bf60393e974 [ 331.928599] R10: ffff9bf626a8ea68 R11: ffff9bf654a6c280 R12: 0000000000000001 [ 331.935731] R13: ffff9bf626a8ea68 R14: ffff9bf6cb2f4330 R15: ffff9bf626a8e8c8 [ 331.942863] FS: 0000000000000000(0000) GS:ffff9bfd5d7c0000(0000) knlGS:0000000000000000 [ 331.950949] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 331.956697] CR2: 000055f32175ab78 CR3: 0000000123e2c000 CR4: 00000000003506e0 [ 331.963830] Call Trace: [ 331.966284] [ 331.968390] core_tmr_drain_state_list+0x13d/0x320 [target_core_mod] [ 331.974767] ? core_tmr_drain_tmr_list+0x1ad/0x290 [target_core_mod] [ 331.981146] core_tmr_lun_reset+0x7e/0x190 [target_core_mod] [ 331.986831] target_tmr_work+0xb4/0xf0 [target_core_mod] [ 331.992170] process_one_work+0x1e8/0x410 [ 331.996191] ? process_one_work+0x410/0x410 [ 332.000376] worker_thread+0x50/0x3b0 [ 332.004041] ? process_one_work+0x410/0x410 [ 332.008227] kthread+0x106/0x130 [ 332.011462] ? kthread_complete_and_exit+0x20/0x20 [ 332.016255] ret_from_fork+0x22/0x30 [ 332.019843] [ 332.022034] ---[ end trace 9c47cae16d5fe975 ]--- [ 332.029453] sd 5:0:0:0: Power-on or device reset occurred [ 334.040627] scsi host5: SRP reset_device called [ 334.041020] sd 5:0:0:0: Power-on or device reset occurred [ 336.054397] scsi host5: SRP reset_device called [ 336.058408] sd 5:0:0:0: Power-on or device reset occurred [ 338.068302] scsi host5: SRP reset_device called [ 338.068599] sd 5:0:0:0: Power-on or device reset occurred [ 340.081803] scsi host5: SRP reset_device called [ 340.082099] sd 5:0:0:0: Power-on or device reset occurred [ 342.093771] scsi host5: SRP reset_device called [ 342.094059] sd 5:0:0:0: Power-on or device reset occurred [ 344.106379] scsi host5: SRP reset_device called [ 344.106760] sd 5:0:0:0: Power-on or device reset occurred [ 346.119396] scsi host5: SRP reset_device called [ 346.119729] sd 5:0:0:0: Power-on or device reset occurred [ 348.131432] scsi host5: SRP reset_device called [ 348.131816] sd 5:0:0:0: Power-on or device reset occurred [ 350.144144] scsi host5: SRP reset_device called [ 350.144479] sd 5:0:0:0: Power-on or device reset occurred [ 352.157906] scsi host5: SRP reset_device called [ 352.158300] sd 5:0:0:0: Power-on or device reset occurred [ 354.171930] scsi host5: SRP reset_device called [ 354.172147] sd 5:0:0:0: Power-on or device reset occurred [ 356.185963] scsi host5: SRP reset_device called [ 356.186262] sd 5:0:0:0: Power-on or device reset occurred [ 357.613188] scsi 5:0:0:0: alua: Detached [ 357.671337] sd 5:0:0:2: [sdd] Synchronizing SCSI cache [ 357.740793] ib_srpt receiving failed for ioctx 00000000c3a4016c with status 5 [ 357.740800] ib_srpt receiving failed for ioctx 0000000016db300d with status 5 [ 357.740802] ib_srpt receiving failed for ioctx 0000000079d324f6 with status 5 [ 357.740804] ib_srpt receiving failed for ioctx 000000001c88d1ac with status 5 [ 357.740805] ib_srpt receiving failed for ioctx 000000008a758029 with status 5 [ 357.740806] ib_srpt receiving failed for ioctx 00000000369466df with status 5 [ 357.740808] ib_srpt receiving failed for ioctx 000000008489c3cd with status 5 [ 357.740809] ib_srpt receiving failed for ioctx 000000006b9cb3c8 with status 5 [ 357.740810] ib_srpt receiving failed for ioctx 00000000aecd9847 with status 5 [ 357.740811] ib_srpt receiving failed for ioctx 0000000025b3affc with status 5 [ 358.205195] scsi 5:0:0:2: alua: Detached [ 358.215201] scsi 5:0:0:1: alua: Detached [ 359.392394] sd 4:0:0:0: [sdb] Synchronizing SCSI cache [ 359.437145] SoftiWARP detached