use_pty:FALSE /usr/share/restraint/plugins/run_task_plugins bash ./runtest.sh :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Setup :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: [ 09:51:36 ] :: [ BEGIN ] :: Running 'dmidecode --type 38 > /tmp/dmidecode.log' :: [ 09:51:36 ] :: [ LOG ] :: Output of 'dmidecode --type 38 > /tmp/dmidecode.log': :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 09:51:36 ] :: [ PASS ] :: Command 'dmidecode --type 38 > /tmp/dmidecode.log' (Expected 0, got 0) IPMI Device Information :: [ 09:51:36 ] :: [ PASS ] :: Moving on, host is ipmi compatible :: [ 09:51:36 ] :: [ BEGIN ] :: Running 'modprobe -r ipmi_ssif ipmi_devintf ipmi_poweroff ipmi_watchdog ipmi_si' modprobe: FATAL: Module ipmi_si is in use. :: [ 09:51:36 ] :: [ PASS ] :: Command 'modprobe -r ipmi_ssif ipmi_devintf ipmi_poweroff ipmi_watchdog ipmi_si' (Expected 0,1, got 1) :: [ 09:51:36 ] :: [ BEGIN ] :: Running 'modprobe ipmi_ssif' :: [ 09:51:36 ] :: [ LOG ] :: Output of 'modprobe ipmi_ssif': :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 09:51:36 ] :: [ PASS ] :: Command 'modprobe ipmi_ssif' (Expected 0,1, got 0) :: [ 09:51:36 ] :: [ BEGIN ] :: Running 'modprobe ipmi_devintf' :: [ 09:51:36 ] :: [ LOG ] :: Output of 'modprobe ipmi_devintf': :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 09:51:36 ] :: [ PASS ] :: Command 'modprobe ipmi_devintf' (Expected 0,1, got 0) :: [ 09:51:36 ] :: [ BEGIN ] :: Running 'modprobe ipmi_poweroff' :: [ 09:51:36 ] :: [ LOG ] :: Output of 'modprobe ipmi_poweroff': :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 09:51:36 ] :: [ PASS ] :: Command 'modprobe ipmi_poweroff' (Expected 0,1, got 0) :: [ 09:51:36 ] :: [ BEGIN ] :: Running 'modprobe ipmi_watchdog' :: [ 09:51:37 ] :: [ LOG ] :: Output of 'modprobe ipmi_watchdog': :: [ 09:51:37 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 09:51:37 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 09:51:37 ] :: [ PASS ] :: Command 'modprobe ipmi_watchdog' (Expected 0,1, got 0) :: [ 09:51:37 ] :: [ BEGIN ] :: Running 'modprobe ipmi_si' :: [ 09:51:37 ] :: [ LOG ] :: Output of 'modprobe ipmi_si': :: [ 09:51:37 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 09:51:37 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 09:51:37 ] :: [ PASS ] :: Command 'modprobe ipmi_si' (Expected 0,1, got 0) :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Duration: 1s :: Assertions: 8 good, 0 bad :: RESULT: PASS (Setup) ** Setup PASS Score:0 Uploading resultoutputfile.log .done :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Test :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: [ 09:51:37 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 09:51:37 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:51:37 ] :: [ BEGIN ] :: Running 'ipmitool sel list' SEL has no entries :: [ 09:51:37 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:51:37 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 09:51:37 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:51:37 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 34373737-3632-4d32-3235-34323050584a Timestamp : 10/05/1997 02:44:07 :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Error response 0xc1 from Get PICMG Properities Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : UID (0x1) Entity ID : 23.1 Sensor Type (Discrete): Unknown Sensor ID : Sys Health LED (0x2) Entity ID : 23.2 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : 01-Inlet Ambient (0x3) Entity ID : 64.1 Sensor Type (Threshold) : Temperature Sensor Reading : 24 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 42.000 Upper Non-Recoverable : 46.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 02-CPU (0x4) Entity ID : 65.1 Sensor Type (Threshold) : Temperature Sensor Reading : 40 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 70.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 03-P1 DIMM 1-4 (0x5) Entity ID : 32.1 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 04-P1 DIMM 5-8 (0x6) Entity ID : 32.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 05-HD Max (0x7) Entity ID : 4.1 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 06-Chipset (0x8) Entity ID : 66.1 Sensor Type (Threshold) : Temperature Sensor Reading : 43 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 105.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 07-P/S 1 (0x9) Entity ID : 10.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 08-P/S 2 (0xa) Entity ID : 10.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 09-VR P1 (0xb) Entity ID : 19.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 10-VR P1 Zone (0xc) Entity ID : 19.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 11-VR P1 Mem (0xd) Entity ID : 19.3 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 12-Storage Batt (0xe) Entity ID : 40.1 Sensor Type (Threshold) : Temperature Sensor Reading : 26 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 13-iLO Zone (0xf) Entity ID : 6.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 80.000 Upper Non-Recoverable : 85.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 14-System Board (0x10) Entity ID : 66.2 Sensor Type (Threshold) : Temperature Sensor Reading : 34 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 15-System Board (0x11) Entity ID : 66.3 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 16-P/S Zone (0x12) Entity ID : 66.4 Sensor Type (Threshold) : Temperature Sensor Reading : 25 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : 127.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 17-System Board (0x13) Entity ID : 66.5 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 18-System Board (0x14) Entity ID : 66.6 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 19-System Board (0x15) Entity ID : 66.7 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 20-PCI 1 (0x16) Entity ID : 11.1 Sensor Type (Threshold) : Temperature Sensor Reading : 65 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 21-PCI 2 (0x17) Entity ID : 11.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 22-PCI 3 (0x18) Entity ID : 11.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 23-PCI 1 Zone (0x19) Entity ID : 16.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 24-PCI 2 Zone (0x1a) Entity ID : 16.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 25-PCI 3 Zone (0x1b) Entity ID : 16.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 26-LOM card (0x1c) Entity ID : 11.4 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 27-I/O Board (0x1d) Entity ID : 16.4 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 28-LOM (0x1e) Entity ID : 66.8 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : Fan 1 (0x1f) Entity ID : 29.1 Sensor Type (Discrete): Fan Sensor Reading : 42.336 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 1 DutyCycle (0x20) Entity ID : 29.1 Sensor Type (Threshold) : Fan Sensor Reading : 42.336 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 1 Presence (0x21) Entity ID : 29.1 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 2 (0x22) Entity ID : 29.2 Sensor Type (Discrete): Fan Sensor Reading : 42.336 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 2 DutyCycle (0x23) Entity ID : 29.2 Sensor Type (Threshold) : Fan Sensor Reading : 42.336 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 2 Presence (0x24) Entity ID : 29.2 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 3 (0x25) Entity ID : 29.3 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 3 DutyCycle (0x26) Entity ID : 29.3 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 3 Presence (0x27) Entity ID : 29.3 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Fan 4 (0x28) Entity ID : 29.4 Sensor Type (Discrete): Fan Sensor Reading : 27.832 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 4 DutyCycle (0x29) Entity ID : 29.4 Sensor Type (Threshold) : Fan Sensor Reading : 27.832 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 4 Presence (0x2a) Entity ID : 29.4 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 5 (0x2b) Entity ID : 29.5 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 5 DutyCycle (0x2c) Entity ID : 29.5 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 5 Presence (0x2d) Entity ID : 29.5 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Power Supply 1 (0x2e) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : PS 1 Presence (0x2f) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Device Present] Sensor ID : Megacell Status (0x30) Entity ID : 40.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : Memory Status (0x31) Entity ID : 7.1 Sensor Type (Discrete): Memory Sensor Reading : 0 error States Asserted : Memory [Presence Detected] Sensor ID : C2 P1I Bay 1 (0x32) Entity ID : 4.5 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : C2 P1I Bay 2 (0x33) Entity ID : 4.6 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] :: [ 09:51:40 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:51:40 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 19 Device Revision : 2 Firmware Revision : 2.75 IPMI Version : 2.0 Manufacturer ID : 11 Manufacturer Name : Hewlett-Packard Product ID : 8192 (0x2000) Product Name : Unknown (0x2000) Device Available : yes Provides Device SDRs : no Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device Chassis Device :: [ 09:51:41 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:51:41 ] :: [ BEGIN ] :: Running 'ipmitool sdr' UID | 0x00 | ok Sys Health LED | no reading | ns 01-Inlet Ambient | 24 degrees C | ok 02-CPU | 40 degrees C | ok 03-P1 DIMM 1-4 | 27 degrees C | ok 04-P1 DIMM 5-8 | 27 degrees C | ok 05-HD Max | 35 degrees C | ok 06-Chipset | 43 degrees C | ok 07-P/S 1 | disabled | ns 08-P/S 2 | disabled | ns 09-VR P1 | 30 degrees C | ok 10-VR P1 Zone | 27 degrees C | ok 11-VR P1 Mem | 27 degrees C | ok 12-Storage Batt | 26 degrees C | ok 13-iLO Zone | 30 degrees C | ok 14-System Board | 34 degrees C | ok 15-System Board | 30 degrees C | ok 16-P/S Zone | 25 degrees C | ok 17-System Board | 32 degrees C | ok 18-System Board | 32 degrees C | ok 19-System Board | 31 degrees C | ok 20-PCI 1 | 65 degrees C | ok 21-PCI 2 | disabled | ns 22-PCI 3 | disabled | ns 23-PCI 1 Zone | 30 degrees C | ok 24-PCI 2 Zone | 27 degrees C | ok 25-PCI 3 Zone | disabled | ns 26-LOM card | disabled | ns 27-I/O Board | 28 degrees C | ok 28-LOM | disabled | ns Fan 1 | 42.34 percent | ok Fan 1 DutyCycle | 42.34 percent | ok Fan 1 Presence | 0x6c | ok Fan 2 | 42.34 percent | ok Fan 2 DutyCycle | 42.34 percent | ok Fan 2 Presence | 0x6c | ok Fan 3 | disabled | ns Fan 3 DutyCycle | disabled | ns Fan 3 Presence | 0x00 | ok Fan 4 | 27.83 percent | ok Fan 4 DutyCycle | 27.83 percent | ok Fan 4 Presence | 0x47 | ok Fan 5 | disabled | ns Fan 5 DutyCycle | disabled | ns Fan 5 Presence | 0x00 | ok Power Supply 1 | 0x00 | ok PS 1 Presence | 0x00 | ok Megacell Status | 0x00 | ok Memory Status | 0 error | ok C2 P1I Bay 1 | 0x01 | ok C2 P1I Bay 2 | 0x01 | ok :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ INFO ] :: Loop 0 Complete :: [ 09:51:43 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ BEGIN ] :: Running 'ipmitool sel list' SEL has no entries :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 34373737-3632-4d32-3235-34323050584a Timestamp : 10/05/1997 02:44:07 :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Error response 0xc1 from Get PICMG Properities Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : UID (0x1) Entity ID : 23.1 Sensor Type (Discrete): Unknown Sensor ID : Sys Health LED (0x2) Entity ID : 23.2 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : 01-Inlet Ambient (0x3) Entity ID : 64.1 Sensor Type (Threshold) : Temperature Sensor Reading : 24 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 42.000 Upper Non-Recoverable : 46.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 02-CPU (0x4) Entity ID : 65.1 Sensor Type (Threshold) : Temperature Sensor Reading : 40 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 70.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 03-P1 DIMM 1-4 (0x5) Entity ID : 32.1 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 04-P1 DIMM 5-8 (0x6) Entity ID : 32.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 05-HD Max (0x7) Entity ID : 4.1 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 06-Chipset (0x8) Entity ID : 66.1 Sensor Type (Threshold) : Temperature Sensor Reading : 43 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 105.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 07-P/S 1 (0x9) Entity ID : 10.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 08-P/S 2 (0xa) Entity ID : 10.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 09-VR P1 (0xb) Entity ID : 19.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 10-VR P1 Zone (0xc) Entity ID : 19.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 11-VR P1 Mem (0xd) Entity ID : 19.3 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 12-Storage Batt (0xe) Entity ID : 40.1 Sensor Type (Threshold) : Temperature Sensor Reading : 26 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 13-iLO Zone (0xf) Entity ID : 6.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 80.000 Upper Non-Recoverable : 85.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 14-System Board (0x10) Entity ID : 66.2 Sensor Type (Threshold) : Temperature Sensor Reading : 34 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 15-System Board (0x11) Entity ID : 66.3 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 16-P/S Zone (0x12) Entity ID : 66.4 Sensor Type (Threshold) : Temperature Sensor Reading : 25 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : 127.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 17-System Board (0x13) Entity ID : 66.5 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 18-System Board (0x14) Entity ID : 66.6 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 19-System Board (0x15) Entity ID : 66.7 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 20-PCI 1 (0x16) Entity ID : 11.1 Sensor Type (Threshold) : Temperature Sensor Reading : 65 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 21-PCI 2 (0x17) Entity ID : 11.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 22-PCI 3 (0x18) Entity ID : 11.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 23-PCI 1 Zone (0x19) Entity ID : 16.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 24-PCI 2 Zone (0x1a) Entity ID : 16.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 25-PCI 3 Zone (0x1b) Entity ID : 16.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 26-LOM card (0x1c) Entity ID : 11.4 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 27-I/O Board (0x1d) Entity ID : 16.4 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 28-LOM (0x1e) Entity ID : 66.8 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : Fan 1 (0x1f) Entity ID : 29.1 Sensor Type (Discrete): Fan Sensor Reading : 42.336 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 1 DutyCycle (0x20) Entity ID : 29.1 Sensor Type (Threshold) : Fan Sensor Reading : 42.336 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 1 Presence (0x21) Entity ID : 29.1 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 2 (0x22) Entity ID : 29.2 Sensor Type (Discrete): Fan Sensor Reading : 42.336 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 2 DutyCycle (0x23) Entity ID : 29.2 Sensor Type (Threshold) : Fan Sensor Reading : 42.336 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 2 Presence (0x24) Entity ID : 29.2 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 3 (0x25) Entity ID : 29.3 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 3 DutyCycle (0x26) Entity ID : 29.3 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 3 Presence (0x27) Entity ID : 29.3 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Fan 4 (0x28) Entity ID : 29.4 Sensor Type (Discrete): Fan Sensor Reading : 27.832 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 4 DutyCycle (0x29) Entity ID : 29.4 Sensor Type (Threshold) : Fan Sensor Reading : 27.832 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 4 Presence (0x2a) Entity ID : 29.4 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 5 (0x2b) Entity ID : 29.5 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 5 DutyCycle (0x2c) Entity ID : 29.5 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 5 Presence (0x2d) Entity ID : 29.5 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Power Supply 1 (0x2e) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : PS 1 Presence (0x2f) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Device Present] Sensor ID : Megacell Status (0x30) Entity ID : 40.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : Memory Status (0x31) Entity ID : 7.1 Sensor Type (Discrete): Memory Sensor Reading : 0 error States Asserted : Memory [Presence Detected] Sensor ID : C2 P1I Bay 1 (0x32) Entity ID : 4.5 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : C2 P1I Bay 2 (0x33) Entity ID : 4.6 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] :: [ 09:51:46 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:51:46 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 19 Device Revision : 2 Firmware Revision : 2.75 IPMI Version : 2.0 Manufacturer ID : 11 Manufacturer Name : Hewlett-Packard Product ID : 8192 (0x2000) Product Name : Unknown (0x2000) Device Available : yes Provides Device SDRs : no Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device Chassis Device :: [ 09:51:46 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:51:46 ] :: [ BEGIN ] :: Running 'ipmitool sdr' UID | 0x00 | ok Sys Health LED | no reading | ns 01-Inlet Ambient | 24 degrees C | ok 02-CPU | 40 degrees C | ok 03-P1 DIMM 1-4 | 27 degrees C | ok 04-P1 DIMM 5-8 | 27 degrees C | ok 05-HD Max | 35 degrees C | ok 06-Chipset | 43 degrees C | ok 07-P/S 1 | disabled | ns 08-P/S 2 | disabled | ns 09-VR P1 | 30 degrees C | ok 10-VR P1 Zone | 27 degrees C | ok 11-VR P1 Mem | 27 degrees C | ok 12-Storage Batt | 26 degrees C | ok 13-iLO Zone | 30 degrees C | ok 14-System Board | 34 degrees C | ok 15-System Board | 30 degrees C | ok 16-P/S Zone | 25 degrees C | ok 17-System Board | 32 degrees C | ok 18-System Board | 32 degrees C | ok 19-System Board | 31 degrees C | ok 20-PCI 1 | 65 degrees C | ok 21-PCI 2 | disabled | ns 22-PCI 3 | disabled | ns 23-PCI 1 Zone | 30 degrees C | ok 24-PCI 2 Zone | 27 degrees C | ok 25-PCI 3 Zone | disabled | ns 26-LOM card | disabled | ns 27-I/O Board | 28 degrees C | ok 28-LOM | disabled | ns Fan 1 | 42.34 percent | ok Fan 1 DutyCycle | 42.34 percent | ok Fan 1 Presence | 0x6c | ok Fan 2 | 42.34 percent | ok Fan 2 DutyCycle | 42.34 percent | ok Fan 2 Presence | 0x6c | ok Fan 3 | disabled | ns Fan 3 DutyCycle | disabled | ns Fan 3 Presence | 0x00 | ok Fan 4 | 27.83 percent | ok Fan 4 DutyCycle | 27.83 percent | ok Fan 4 Presence | 0x47 | ok Fan 5 | disabled | ns Fan 5 DutyCycle | disabled | ns Fan 5 Presence | 0x00 | ok Power Supply 1 | 0x00 | ok PS 1 Presence | 0x00 | ok Megacell Status | 0x00 | ok Memory Status | 0 error | ok C2 P1I Bay 1 | 0x01 | ok C2 P1I Bay 2 | 0x01 | ok :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ INFO ] :: Loop 1 Complete :: [ 09:51:48 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ BEGIN ] :: Running 'ipmitool sel list' SEL has no entries :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 34373737-3632-4d32-3235-34323050584a Timestamp : 10/05/1997 02:44:07 :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:51:49 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:51:49 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:51:49 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none :: [ 09:51:49 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:51:49 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 09:51:49 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:51:49 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 09:51:49 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:51:49 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Error response 0xc1 from Get PICMG Properities Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : UID (0x1) Entity ID : 23.1 Sensor Type (Discrete): Unknown Sensor ID : Sys Health LED (0x2) Entity ID : 23.2 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : 01-Inlet Ambient (0x3) Entity ID : 64.1 Sensor Type (Threshold) : Temperature Sensor Reading : 24 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 42.000 Upper Non-Recoverable : 46.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 02-CPU (0x4) Entity ID : 65.1 Sensor Type (Threshold) : Temperature Sensor Reading : 40 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 70.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 03-P1 DIMM 1-4 (0x5) Entity ID : 32.1 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 04-P1 DIMM 5-8 (0x6) Entity ID : 32.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 05-HD Max (0x7) Entity ID : 4.1 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 06-Chipset (0x8) Entity ID : 66.1 Sensor Type (Threshold) : Temperature Sensor Reading : 43 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 105.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 07-P/S 1 (0x9) Entity ID : 10.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 08-P/S 2 (0xa) Entity ID : 10.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 09-VR P1 (0xb) Entity ID : 19.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 10-VR P1 Zone (0xc) Entity ID : 19.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 11-VR P1 Mem (0xd) Entity ID : 19.3 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 12-Storage Batt (0xe) Entity ID : 40.1 Sensor Type (Threshold) : Temperature Sensor Reading : 26 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 13-iLO Zone (0xf) Entity ID : 6.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 80.000 Upper Non-Recoverable : 85.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 14-System Board (0x10) Entity ID : 66.2 Sensor Type (Threshold) : Temperature Sensor Reading : 34 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 15-System Board (0x11) Entity ID : 66.3 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 16-P/S Zone (0x12) Entity ID : 66.4 Sensor Type (Threshold) : Temperature Sensor Reading : 25 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : 127.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 17-System Board (0x13) Entity ID : 66.5 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 18-System Board (0x14) Entity ID : 66.6 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 19-System Board (0x15) Entity ID : 66.7 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 20-PCI 1 (0x16) Entity ID : 11.1 Sensor Type (Threshold) : Temperature Sensor Reading : 65 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 21-PCI 2 (0x17) Entity ID : 11.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 22-PCI 3 (0x18) Entity ID : 11.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 23-PCI 1 Zone (0x19) Entity ID : 16.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 24-PCI 2 Zone (0x1a) Entity ID : 16.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 25-PCI 3 Zone (0x1b) Entity ID : 16.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 26-LOM card (0x1c) Entity ID : 11.4 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 27-I/O Board (0x1d) Entity ID : 16.4 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 28-LOM (0x1e) Entity ID : 66.8 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : Fan 1 (0x1f) Entity ID : 29.1 Sensor Type (Discrete): Fan Sensor Reading : 41.552 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 1 DutyCycle (0x20) Entity ID : 29.1 Sensor Type (Threshold) : Fan Sensor Reading : 41.552 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 1 Presence (0x21) Entity ID : 29.1 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 2 (0x22) Entity ID : 29.2 Sensor Type (Discrete): Fan Sensor Reading : 41.552 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 2 DutyCycle (0x23) Entity ID : 29.2 Sensor Type (Threshold) : Fan Sensor Reading : 41.552 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 2 Presence (0x24) Entity ID : 29.2 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 3 (0x25) Entity ID : 29.3 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 3 DutyCycle (0x26) Entity ID : 29.3 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 3 Presence (0x27) Entity ID : 29.3 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Fan 4 (0x28) Entity ID : 29.4 Sensor Type (Discrete): Fan Sensor Reading : 27.832 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 4 DutyCycle (0x29) Entity ID : 29.4 Sensor Type (Threshold) : Fan Sensor Reading : 27.832 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 4 Presence (0x2a) Entity ID : 29.4 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 5 (0x2b) Entity ID : 29.5 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 5 DutyCycle (0x2c) Entity ID : 29.5 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 5 Presence (0x2d) Entity ID : 29.5 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Power Supply 1 (0x2e) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : PS 1 Presence (0x2f) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Device Present] Sensor ID : Megacell Status (0x30) Entity ID : 40.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : Memory Status (0x31) Entity ID : 7.1 Sensor Type (Discrete): Memory Sensor Reading : 0 error States Asserted : Memory [Presence Detected] Sensor ID : C2 P1I Bay 1 (0x32) Entity ID : 4.5 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : C2 P1I Bay 2 (0x33) Entity ID : 4.6 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] :: [ 09:51:51 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:51:51 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 19 Device Revision : 2 Firmware Revision : 2.75 IPMI Version : 2.0 Manufacturer ID : 11 Manufacturer Name : Hewlett-Packard Product ID : 8192 (0x2000) Product Name : Unknown (0x2000) Device Available : yes Provides Device SDRs : no Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device Chassis Device :: [ 09:51:51 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:51:51 ] :: [ BEGIN ] :: Running 'ipmitool sdr' UID | 0x00 | ok Sys Health LED | no reading | ns 01-Inlet Ambient | 24 degrees C | ok 02-CPU | 40 degrees C | ok 03-P1 DIMM 1-4 | 27 degrees C | ok 04-P1 DIMM 5-8 | 27 degrees C | ok 05-HD Max | 35 degrees C | ok 06-Chipset | 43 degrees C | ok 07-P/S 1 | disabled | ns 08-P/S 2 | disabled | ns 09-VR P1 | 30 degrees C | ok 10-VR P1 Zone | 27 degrees C | ok 11-VR P1 Mem | 27 degrees C | ok 12-Storage Batt | 26 degrees C | ok 13-iLO Zone | 31 degrees C | ok 14-System Board | 34 degrees C | ok 15-System Board | 30 degrees C | ok 16-P/S Zone | 25 degrees C | ok 17-System Board | 32 degrees C | ok 18-System Board | 32 degrees C | ok 19-System Board | 31 degrees C | ok 20-PCI 1 | 65 degrees C | ok 21-PCI 2 | disabled | ns 22-PCI 3 | disabled | ns 23-PCI 1 Zone | 30 degrees C | ok 24-PCI 2 Zone | 27 degrees C | ok 25-PCI 3 Zone | disabled | ns 26-LOM card | disabled | ns 27-I/O Board | 28 degrees C | ok 28-LOM | disabled | ns Fan 1 | 41.55 percent | ok Fan 1 DutyCycle | 41.55 percent | ok Fan 1 Presence | 0x6a | ok Fan 2 | 41.55 percent | ok Fan 2 DutyCycle | 41.55 percent | ok Fan 2 Presence | 0x6a | ok Fan 3 | disabled | ns Fan 3 DutyCycle | disabled | ns Fan 3 Presence | 0x00 | ok Fan 4 | 27.83 percent | ok Fan 4 DutyCycle | 27.83 percent | ok Fan 4 Presence | 0x47 | ok Fan 5 | disabled | ns Fan 5 DutyCycle | disabled | ns Fan 5 Presence | 0x00 | ok Power Supply 1 | 0x00 | ok PS 1 Presence | 0x00 | ok Megacell Status | 0x00 | ok Memory Status | 0 error | ok C2 P1I Bay 1 | 0x01 | ok C2 P1I Bay 2 | 0x01 | ok :: [ 09:51:53 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:51:53 ] :: [ INFO ] :: Loop 2 Complete :: [ 09:51:54 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ BEGIN ] :: Running 'ipmitool sel list' SEL has no entries :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 34373737-3632-4d32-3235-34323050584a Timestamp : 10/05/1997 02:44:07 :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Error response 0xc1 from Get PICMG Properities Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : UID (0x1) Entity ID : 23.1 Sensor Type (Discrete): Unknown Sensor ID : Sys Health LED (0x2) Entity ID : 23.2 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : 01-Inlet Ambient (0x3) Entity ID : 64.1 Sensor Type (Threshold) : Temperature Sensor Reading : 24 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 42.000 Upper Non-Recoverable : 46.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 02-CPU (0x4) Entity ID : 65.1 Sensor Type (Threshold) : Temperature Sensor Reading : 40 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 70.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 03-P1 DIMM 1-4 (0x5) Entity ID : 32.1 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 04-P1 DIMM 5-8 (0x6) Entity ID : 32.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 05-HD Max (0x7) Entity ID : 4.1 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 06-Chipset (0x8) Entity ID : 66.1 Sensor Type (Threshold) : Temperature Sensor Reading : 43 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 105.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 07-P/S 1 (0x9) Entity ID : 10.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 08-P/S 2 (0xa) Entity ID : 10.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 09-VR P1 (0xb) Entity ID : 19.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 10-VR P1 Zone (0xc) Entity ID : 19.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 11-VR P1 Mem (0xd) Entity ID : 19.3 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 12-Storage Batt (0xe) Entity ID : 40.1 Sensor Type (Threshold) : Temperature Sensor Reading : 26 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 13-iLO Zone (0xf) Entity ID : 6.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 80.000 Upper Non-Recoverable : 85.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 14-System Board (0x10) Entity ID : 66.2 Sensor Type (Threshold) : Temperature Sensor Reading : 34 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 15-System Board (0x11) Entity ID : 66.3 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 16-P/S Zone (0x12) Entity ID : 66.4 Sensor Type (Threshold) : Temperature Sensor Reading : 25 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : 127.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 17-System Board (0x13) Entity ID : 66.5 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 18-System Board (0x14) Entity ID : 66.6 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 19-System Board (0x15) Entity ID : 66.7 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 20-PCI 1 (0x16) Entity ID : 11.1 Sensor Type (Threshold) : Temperature Sensor Reading : 65 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 21-PCI 2 (0x17) Entity ID : 11.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 22-PCI 3 (0x18) Entity ID : 11.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 23-PCI 1 Zone (0x19) Entity ID : 16.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 24-PCI 2 Zone (0x1a) Entity ID : 16.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 25-PCI 3 Zone (0x1b) Entity ID : 16.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 26-LOM card (0x1c) Entity ID : 11.4 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 27-I/O Board (0x1d) Entity ID : 16.4 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 28-LOM (0x1e) Entity ID : 66.8 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : Fan 1 (0x1f) Entity ID : 29.1 Sensor Type (Discrete): Fan Sensor Reading : 41.552 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 1 DutyCycle (0x20) Entity ID : 29.1 Sensor Type (Threshold) : Fan Sensor Reading : 41.552 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 1 Presence (0x21) Entity ID : 29.1 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 2 (0x22) Entity ID : 29.2 Sensor Type (Discrete): Fan Sensor Reading : 41.552 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 2 DutyCycle (0x23) Entity ID : 29.2 Sensor Type (Threshold) : Fan Sensor Reading : 41.552 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 2 Presence (0x24) Entity ID : 29.2 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 3 (0x25) Entity ID : 29.3 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 3 DutyCycle (0x26) Entity ID : 29.3 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 3 Presence (0x27) Entity ID : 29.3 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Fan 4 (0x28) Entity ID : 29.4 Sensor Type (Discrete): Fan Sensor Reading : 27.832 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 4 DutyCycle (0x29) Entity ID : 29.4 Sensor Type (Threshold) : Fan Sensor Reading : 27.832 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 4 Presence (0x2a) Entity ID : 29.4 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 5 (0x2b) Entity ID : 29.5 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 5 DutyCycle (0x2c) Entity ID : 29.5 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 5 Presence (0x2d) Entity ID : 29.5 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Power Supply 1 (0x2e) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : PS 1 Presence (0x2f) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Device Present] Sensor ID : Megacell Status (0x30) Entity ID : 40.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : Memory Status (0x31) Entity ID : 7.1 Sensor Type (Discrete): Memory Sensor Reading : 0 error States Asserted : Memory [Presence Detected] Sensor ID : C2 P1I Bay 1 (0x32) Entity ID : 4.5 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : C2 P1I Bay 2 (0x33) Entity ID : 4.6 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] :: [ 09:51:57 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:51:57 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 19 Device Revision : 2 Firmware Revision : 2.75 IPMI Version : 2.0 Manufacturer ID : 11 Manufacturer Name : Hewlett-Packard Product ID : 8192 (0x2000) Product Name : Unknown (0x2000) Device Available : yes Provides Device SDRs : no Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device Chassis Device :: [ 09:51:57 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:51:57 ] :: [ BEGIN ] :: Running 'ipmitool sdr' UID | 0x00 | ok Sys Health LED | no reading | ns 01-Inlet Ambient | 24 degrees C | ok 02-CPU | 40 degrees C | ok 03-P1 DIMM 1-4 | 27 degrees C | ok 04-P1 DIMM 5-8 | 27 degrees C | ok 05-HD Max | 35 degrees C | ok 06-Chipset | 43 degrees C | ok 07-P/S 1 | disabled | ns 08-P/S 2 | disabled | ns 09-VR P1 | 30 degrees C | ok 10-VR P1 Zone | 27 degrees C | ok 11-VR P1 Mem | 27 degrees C | ok 12-Storage Batt | 26 degrees C | ok 13-iLO Zone | 31 degrees C | ok 14-System Board | 34 degrees C | ok 15-System Board | 30 degrees C | ok 16-P/S Zone | 25 degrees C | ok 17-System Board | 32 degrees C | ok 18-System Board | 32 degrees C | ok 19-System Board | 31 degrees C | ok 20-PCI 1 | 65 degrees C | ok 21-PCI 2 | disabled | ns 22-PCI 3 | disabled | ns 23-PCI 1 Zone | 30 degrees C | ok 24-PCI 2 Zone | 27 degrees C | ok 25-PCI 3 Zone | disabled | ns 26-LOM card | disabled | ns 27-I/O Board | 28 degrees C | ok 28-LOM | disabled | ns Fan 1 | 41.55 percent | ok Fan 1 DutyCycle | 41.55 percent | ok Fan 1 Presence | 0x6a | ok Fan 2 | 41.55 percent | ok Fan 2 DutyCycle | 41.55 percent | ok Fan 2 Presence | 0x6a | ok Fan 3 | disabled | ns Fan 3 DutyCycle | disabled | ns Fan 3 Presence | 0x00 | ok Fan 4 | 27.83 percent | ok Fan 4 DutyCycle | 27.83 percent | ok Fan 4 Presence | 0x47 | ok Fan 5 | disabled | ns Fan 5 DutyCycle | disabled | ns Fan 5 Presence | 0x00 | ok Power Supply 1 | 0x00 | ok PS 1 Presence | 0x00 | ok Megacell Status | 0x00 | ok Memory Status | 0 error | ok C2 P1I Bay 1 | 0x01 | ok C2 P1I Bay 2 | 0x01 | ok :: [ 09:51:59 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:51:59 ] :: [ INFO ] :: Loop 3 Complete :: [ 09:51:59 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 09:51:59 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:51:59 ] :: [ BEGIN ] :: Running 'ipmitool sel list' SEL has no entries :: [ 09:51:59 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:51:59 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 09:51:59 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:51:59 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 09:51:59 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:51:59 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:51:59 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:51:59 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 34373737-3632-4d32-3235-34323050584a Timestamp : 10/05/1997 02:44:07 :: [ 09:51:59 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:51:59 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:51:59 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:51:59 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none :: [ 09:51:59 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:51:59 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 09:51:59 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:51:59 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 09:52:00 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:52:00 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Error response 0xc1 from Get PICMG Properities Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : UID (0x1) Entity ID : 23.1 Sensor Type (Discrete): Unknown Sensor ID : Sys Health LED (0x2) Entity ID : 23.2 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : 01-Inlet Ambient (0x3) Entity ID : 64.1 Sensor Type (Threshold) : Temperature Sensor Reading : 24 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 42.000 Upper Non-Recoverable : 46.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 02-CPU (0x4) Entity ID : 65.1 Sensor Type (Threshold) : Temperature Sensor Reading : 40 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 70.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 03-P1 DIMM 1-4 (0x5) Entity ID : 32.1 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 04-P1 DIMM 5-8 (0x6) Entity ID : 32.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 05-HD Max (0x7) Entity ID : 4.1 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 06-Chipset (0x8) Entity ID : 66.1 Sensor Type (Threshold) : Temperature Sensor Reading : 43 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 105.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 07-P/S 1 (0x9) Entity ID : 10.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 08-P/S 2 (0xa) Entity ID : 10.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 09-VR P1 (0xb) Entity ID : 19.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 10-VR P1 Zone (0xc) Entity ID : 19.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 11-VR P1 Mem (0xd) Entity ID : 19.3 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 12-Storage Batt (0xe) Entity ID : 40.1 Sensor Type (Threshold) : Temperature Sensor Reading : 26 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 13-iLO Zone (0xf) Entity ID : 6.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 80.000 Upper Non-Recoverable : 85.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 14-System Board (0x10) Entity ID : 66.2 Sensor Type (Threshold) : Temperature Sensor Reading : 34 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 15-System Board (0x11) Entity ID : 66.3 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 16-P/S Zone (0x12) Entity ID : 66.4 Sensor Type (Threshold) : Temperature Sensor Reading : 25 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : 127.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 17-System Board (0x13) Entity ID : 66.5 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 18-System Board (0x14) Entity ID : 66.6 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 19-System Board (0x15) Entity ID : 66.7 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 20-PCI 1 (0x16) Entity ID : 11.1 Sensor Type (Threshold) : Temperature Sensor Reading : 65 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 21-PCI 2 (0x17) Entity ID : 11.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 22-PCI 3 (0x18) Entity ID : 11.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 23-PCI 1 Zone (0x19) Entity ID : 16.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 24-PCI 2 Zone (0x1a) Entity ID : 16.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 25-PCI 3 Zone (0x1b) Entity ID : 16.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 26-LOM card (0x1c) Entity ID : 11.4 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 27-I/O Board (0x1d) Entity ID : 16.4 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 28-LOM (0x1e) Entity ID : 66.8 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : Fan 1 (0x1f) Entity ID : 29.1 Sensor Type (Discrete): Fan Sensor Reading : 41.552 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 1 DutyCycle (0x20) Entity ID : 29.1 Sensor Type (Threshold) : Fan Sensor Reading : 41.552 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 1 Presence (0x21) Entity ID : 29.1 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 2 (0x22) Entity ID : 29.2 Sensor Type (Discrete): Fan Sensor Reading : 41.552 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 2 DutyCycle (0x23) Entity ID : 29.2 Sensor Type (Threshold) : Fan Sensor Reading : 41.552 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 2 Presence (0x24) Entity ID : 29.2 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 3 (0x25) Entity ID : 29.3 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 3 DutyCycle (0x26) Entity ID : 29.3 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 3 Presence (0x27) Entity ID : 29.3 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Fan 4 (0x28) Entity ID : 29.4 Sensor Type (Discrete): Fan Sensor Reading : 27.832 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 4 DutyCycle (0x29) Entity ID : 29.4 Sensor Type (Threshold) : Fan Sensor Reading : 27.832 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 4 Presence (0x2a) Entity ID : 29.4 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 5 (0x2b) Entity ID : 29.5 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 5 DutyCycle (0x2c) Entity ID : 29.5 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 5 Presence (0x2d) Entity ID : 29.5 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Power Supply 1 (0x2e) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : PS 1 Presence (0x2f) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Device Present] Sensor ID : Megacell Status (0x30) Entity ID : 40.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : Memory Status (0x31) Entity ID : 7.1 Sensor Type (Discrete): Memory Sensor Reading : 0 error States Asserted : Memory [Presence Detected] Sensor ID : C2 P1I Bay 1 (0x32) Entity ID : 4.5 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : C2 P1I Bay 2 (0x33) Entity ID : 4.6 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] :: [ 09:52:02 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:52:02 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 19 Device Revision : 2 Firmware Revision : 2.75 IPMI Version : 2.0 Manufacturer ID : 11 Manufacturer Name : Hewlett-Packard Product ID : 8192 (0x2000) Product Name : Unknown (0x2000) Device Available : yes Provides Device SDRs : no Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device Chassis Device :: [ 09:52:02 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:52:02 ] :: [ BEGIN ] :: Running 'ipmitool sdr' UID | 0x00 | ok Sys Health LED | no reading | ns 01-Inlet Ambient | 24 degrees C | ok 02-CPU | 40 degrees C | ok 03-P1 DIMM 1-4 | 27 degrees C | ok 04-P1 DIMM 5-8 | 27 degrees C | ok 05-HD Max | 35 degrees C | ok 06-Chipset | 43 degrees C | ok 07-P/S 1 | disabled | ns 08-P/S 2 | disabled | ns 09-VR P1 | 30 degrees C | ok 10-VR P1 Zone | 27 degrees C | ok 11-VR P1 Mem | 27 degrees C | ok 12-Storage Batt | 26 degrees C | ok 13-iLO Zone | 31 degrees C | ok 14-System Board | 34 degrees C | ok 15-System Board | 30 degrees C | ok 16-P/S Zone | 25 degrees C | ok 17-System Board | 32 degrees C | ok 18-System Board | 32 degrees C | ok 19-System Board | 31 degrees C | ok 20-PCI 1 | 65 degrees C | ok 21-PCI 2 | disabled | ns 22-PCI 3 | disabled | ns 23-PCI 1 Zone | 30 degrees C | ok 24-PCI 2 Zone | 27 degrees C | ok 25-PCI 3 Zone | disabled | ns 26-LOM card | disabled | ns 27-I/O Board | 28 degrees C | ok 28-LOM | disabled | ns Fan 1 | 41.55 percent | ok Fan 1 DutyCycle | 41.55 percent | ok Fan 1 Presence | 0x6a | ok Fan 2 | 41.55 percent | ok Fan 2 DutyCycle | 41.55 percent | ok Fan 2 Presence | 0x6a | ok Fan 3 | disabled | ns Fan 3 DutyCycle | disabled | ns Fan 3 Presence | 0x00 | ok Fan 4 | 27.83 percent | ok Fan 4 DutyCycle | 27.83 percent | ok Fan 4 Presence | 0x47 | ok Fan 5 | disabled | ns Fan 5 DutyCycle | disabled | ns Fan 5 Presence | 0x00 | ok Power Supply 1 | 0x00 | ok PS 1 Presence | 0x00 | ok Megacell Status | 0x00 | ok Memory Status | 0 error | ok C2 P1I Bay 1 | 0x01 | ok C2 P1I Bay 2 | 0x01 | ok :: [ 09:52:04 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:52:04 ] :: [ INFO ] :: Loop 4 Complete :: [ 09:52:04 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 09:52:04 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:52:04 ] :: [ BEGIN ] :: Running 'ipmitool sel list' SEL has no entries :: [ 09:52:04 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:52:04 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 09:52:04 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:52:05 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 09:52:05 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:52:05 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:52:05 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:52:05 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 34373737-3632-4d32-3235-34323050584a Timestamp : 10/05/1997 02:44:07 :: [ 09:52:05 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:52:05 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:52:05 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:52:05 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none :: [ 09:52:05 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:52:05 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 09:52:05 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:52:05 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 09:52:05 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:52:05 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Error response 0xc1 from Get PICMG Properities Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : UID (0x1) Entity ID : 23.1 Sensor Type (Discrete): Unknown Sensor ID : Sys Health LED (0x2) Entity ID : 23.2 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : 01-Inlet Ambient (0x3) Entity ID : 64.1 Sensor Type (Threshold) : Temperature Sensor Reading : 24 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 42.000 Upper Non-Recoverable : 46.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 02-CPU (0x4) Entity ID : 65.1 Sensor Type (Threshold) : Temperature Sensor Reading : 40 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 70.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 03-P1 DIMM 1-4 (0x5) Entity ID : 32.1 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 04-P1 DIMM 5-8 (0x6) Entity ID : 32.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 05-HD Max (0x7) Entity ID : 4.1 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 06-Chipset (0x8) Entity ID : 66.1 Sensor Type (Threshold) : Temperature Sensor Reading : 43 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 105.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 07-P/S 1 (0x9) Entity ID : 10.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 08-P/S 2 (0xa) Entity ID : 10.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 09-VR P1 (0xb) Entity ID : 19.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 10-VR P1 Zone (0xc) Entity ID : 19.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 11-VR P1 Mem (0xd) Entity ID : 19.3 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 12-Storage Batt (0xe) Entity ID : 40.1 Sensor Type (Threshold) : Temperature Sensor Reading : 26 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 13-iLO Zone (0xf) Entity ID : 6.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 80.000 Upper Non-Recoverable : 85.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 14-System Board (0x10) Entity ID : 66.2 Sensor Type (Threshold) : Temperature Sensor Reading : 34 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 15-System Board (0x11) Entity ID : 66.3 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 16-P/S Zone (0x12) Entity ID : 66.4 Sensor Type (Threshold) : Temperature Sensor Reading : 25 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : 127.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 17-System Board (0x13) Entity ID : 66.5 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 18-System Board (0x14) Entity ID : 66.6 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 19-System Board (0x15) Entity ID : 66.7 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 20-PCI 1 (0x16) Entity ID : 11.1 Sensor Type (Threshold) : Temperature Sensor Reading : 65 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 21-PCI 2 (0x17) Entity ID : 11.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 22-PCI 3 (0x18) Entity ID : 11.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 23-PCI 1 Zone (0x19) Entity ID : 16.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 24-PCI 2 Zone (0x1a) Entity ID : 16.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 25-PCI 3 Zone (0x1b) Entity ID : 16.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 26-LOM card (0x1c) Entity ID : 11.4 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 27-I/O Board (0x1d) Entity ID : 16.4 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 28-LOM (0x1e) Entity ID : 66.8 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : Fan 1 (0x1f) Entity ID : 29.1 Sensor Type (Discrete): Fan Sensor Reading : 41.552 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 1 DutyCycle (0x20) Entity ID : 29.1 Sensor Type (Threshold) : Fan Sensor Reading : 41.552 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 1 Presence (0x21) Entity ID : 29.1 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 2 (0x22) Entity ID : 29.2 Sensor Type (Discrete): Fan Sensor Reading : 41.552 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 2 DutyCycle (0x23) Entity ID : 29.2 Sensor Type (Threshold) : Fan Sensor Reading : 41.552 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 2 Presence (0x24) Entity ID : 29.2 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 3 (0x25) Entity ID : 29.3 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 3 DutyCycle (0x26) Entity ID : 29.3 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 3 Presence (0x27) Entity ID : 29.3 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Fan 4 (0x28) Entity ID : 29.4 Sensor Type (Discrete): Fan Sensor Reading : 27.832 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 4 DutyCycle (0x29) Entity ID : 29.4 Sensor Type (Threshold) : Fan Sensor Reading : 27.832 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 4 Presence (0x2a) Entity ID : 29.4 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 5 (0x2b) Entity ID : 29.5 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 5 DutyCycle (0x2c) Entity ID : 29.5 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 5 Presence (0x2d) Entity ID : 29.5 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Power Supply 1 (0x2e) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : PS 1 Presence (0x2f) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Device Present] Sensor ID : Megacell Status (0x30) Entity ID : 40.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : Memory Status (0x31) Entity ID : 7.1 Sensor Type (Discrete): Memory Sensor Reading : 0 error States Asserted : Memory [Presence Detected] Sensor ID : C2 P1I Bay 1 (0x32) Entity ID : 4.5 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : C2 P1I Bay 2 (0x33) Entity ID : 4.6 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] :: [ 09:52:07 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:52:07 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 19 Device Revision : 2 Firmware Revision : 2.75 IPMI Version : 2.0 Manufacturer ID : 11 Manufacturer Name : Hewlett-Packard Product ID : 8192 (0x2000) Product Name : Unknown (0x2000) Device Available : yes Provides Device SDRs : no Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device Chassis Device :: [ 09:52:08 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:52:08 ] :: [ BEGIN ] :: Running 'ipmitool sdr' UID | 0x00 | ok Sys Health LED | no reading | ns 01-Inlet Ambient | 24 degrees C | ok 02-CPU | 40 degrees C | ok 03-P1 DIMM 1-4 | 27 degrees C | ok 04-P1 DIMM 5-8 | 27 degrees C | ok 05-HD Max | 35 degrees C | ok 06-Chipset | 43 degrees C | ok 07-P/S 1 | disabled | ns 08-P/S 2 | disabled | ns 09-VR P1 | 30 degrees C | ok 10-VR P1 Zone | 27 degrees C | ok 11-VR P1 Mem | 28 degrees C | ok 12-Storage Batt | 26 degrees C | ok 13-iLO Zone | 31 degrees C | ok 14-System Board | 35 degrees C | ok 15-System Board | 30 degrees C | ok 16-P/S Zone | 25 degrees C | ok 17-System Board | 32 degrees C | ok 18-System Board | 32 degrees C | ok 19-System Board | 31 degrees C | ok 20-PCI 1 | 65 degrees C | ok 21-PCI 2 | disabled | ns 22-PCI 3 | disabled | ns 23-PCI 1 Zone | 30 degrees C | ok 24-PCI 2 Zone | 27 degrees C | ok 25-PCI 3 Zone | disabled | ns 26-LOM card | disabled | ns 27-I/O Board | 28 degrees C | ok 28-LOM | disabled | ns Fan 1 | 41.55 percent | ok Fan 1 DutyCycle | 41.55 percent | ok Fan 1 Presence | 0x6a | ok Fan 2 | 41.55 percent | ok Fan 2 DutyCycle | 41.55 percent | ok Fan 2 Presence | 0x6a | ok Fan 3 | disabled | ns Fan 3 DutyCycle | disabled | ns Fan 3 Presence | 0x00 | ok Fan 4 | 27.83 percent | ok Fan 4 DutyCycle | 27.83 percent | ok Fan 4 Presence | 0x47 | ok Fan 5 | disabled | ns Fan 5 DutyCycle | disabled | ns Fan 5 Presence | 0x00 | ok Power Supply 1 | 0x00 | ok PS 1 Presence | 0x00 | ok Megacell Status | 0x00 | ok Memory Status | 0 error | ok C2 P1I Bay 1 | 0x01 | ok C2 P1I Bay 2 | 0x01 | ok :: [ 09:52:10 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:52:10 ] :: [ INFO ] :: Loop 5 Complete :: [ 09:52:10 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 09:52:10 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:52:10 ] :: [ BEGIN ] :: Running 'ipmitool sel list' SEL has no entries :: [ 09:52:10 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:52:10 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 09:52:10 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:52:10 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 09:52:10 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:52:10 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:52:10 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:52:10 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 34373737-3632-4d32-3235-34323050584a Timestamp : 10/05/1997 02:44:07 :: [ 09:52:10 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:52:10 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:52:10 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:52:10 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none :: [ 09:52:10 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:52:10 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 09:52:10 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:52:10 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 09:52:10 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:52:10 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Error response 0xc1 from Get PICMG Properities Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : UID (0x1) Entity ID : 23.1 Sensor Type (Discrete): Unknown Sensor ID : Sys Health LED (0x2) Entity ID : 23.2 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : 01-Inlet Ambient (0x3) Entity ID : 64.1 Sensor Type (Threshold) : Temperature Sensor Reading : 24 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 42.000 Upper Non-Recoverable : 46.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 02-CPU (0x4) Entity ID : 65.1 Sensor Type (Threshold) : Temperature Sensor Reading : 40 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 70.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 03-P1 DIMM 1-4 (0x5) Entity ID : 32.1 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 04-P1 DIMM 5-8 (0x6) Entity ID : 32.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 05-HD Max (0x7) Entity ID : 4.1 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 06-Chipset (0x8) Entity ID : 66.1 Sensor Type (Threshold) : Temperature Sensor Reading : 43 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 105.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 07-P/S 1 (0x9) Entity ID : 10.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 08-P/S 2 (0xa) Entity ID : 10.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 09-VR P1 (0xb) Entity ID : 19.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 10-VR P1 Zone (0xc) Entity ID : 19.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 11-VR P1 Mem (0xd) Entity ID : 19.3 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 12-Storage Batt (0xe) Entity ID : 40.1 Sensor Type (Threshold) : Temperature Sensor Reading : 26 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 13-iLO Zone (0xf) Entity ID : 6.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 80.000 Upper Non-Recoverable : 85.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 14-System Board (0x10) Entity ID : 66.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 15-System Board (0x11) Entity ID : 66.3 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 16-P/S Zone (0x12) Entity ID : 66.4 Sensor Type (Threshold) : Temperature Sensor Reading : 25 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : 127.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 17-System Board (0x13) Entity ID : 66.5 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 18-System Board (0x14) Entity ID : 66.6 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 19-System Board (0x15) Entity ID : 66.7 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 20-PCI 1 (0x16) Entity ID : 11.1 Sensor Type (Threshold) : Temperature Sensor Reading : 65 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 21-PCI 2 (0x17) Entity ID : 11.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 22-PCI 3 (0x18) Entity ID : 11.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 23-PCI 1 Zone (0x19) Entity ID : 16.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 24-PCI 2 Zone (0x1a) Entity ID : 16.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 25-PCI 3 Zone (0x1b) Entity ID : 16.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 26-LOM card (0x1c) Entity ID : 11.4 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 27-I/O Board (0x1d) Entity ID : 16.4 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 28-LOM (0x1e) Entity ID : 66.8 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : Fan 1 (0x1f) Entity ID : 29.1 Sensor Type (Discrete): Fan Sensor Reading : 41.160 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 1 DutyCycle (0x20) Entity ID : 29.1 Sensor Type (Threshold) : Fan Sensor Reading : 41.160 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 1 Presence (0x21) Entity ID : 29.1 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 2 (0x22) Entity ID : 29.2 Sensor Type (Discrete): Fan Sensor Reading : 41.160 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 2 DutyCycle (0x23) Entity ID : 29.2 Sensor Type (Threshold) : Fan Sensor Reading : 41.160 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 2 Presence (0x24) Entity ID : 29.2 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 3 (0x25) Entity ID : 29.3 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 3 DutyCycle (0x26) Entity ID : 29.3 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 3 Presence (0x27) Entity ID : 29.3 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Fan 4 (0x28) Entity ID : 29.4 Sensor Type (Discrete): Fan Sensor Reading : 27.832 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 4 DutyCycle (0x29) Entity ID : 29.4 Sensor Type (Threshold) : Fan Sensor Reading : 27.832 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 4 Presence (0x2a) Entity ID : 29.4 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 5 (0x2b) Entity ID : 29.5 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 5 DutyCycle (0x2c) Entity ID : 29.5 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 5 Presence (0x2d) Entity ID : 29.5 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Power Supply 1 (0x2e) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : PS 1 Presence (0x2f) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Device Present] Sensor ID : Megacell Status (0x30) Entity ID : 40.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : Memory Status (0x31) Entity ID : 7.1 Sensor Type (Discrete): Memory Sensor Reading : 0 error States Asserted : Memory [Presence Detected] Sensor ID : C2 P1I Bay 1 (0x32) Entity ID : 4.5 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : C2 P1I Bay 2 (0x33) Entity ID : 4.6 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] :: [ 09:52:13 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:52:13 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 19 Device Revision : 2 Firmware Revision : 2.75 IPMI Version : 2.0 Manufacturer ID : 11 Manufacturer Name : Hewlett-Packard Product ID : 8192 (0x2000) Product Name : Unknown (0x2000) Device Available : yes Provides Device SDRs : no Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device Chassis Device :: [ 09:52:13 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:52:13 ] :: [ BEGIN ] :: Running 'ipmitool sdr' UID | 0x00 | ok Sys Health LED | no reading | ns 01-Inlet Ambient | 24 degrees C | ok 02-CPU | 40 degrees C | ok 03-P1 DIMM 1-4 | 27 degrees C | ok 04-P1 DIMM 5-8 | 27 degrees C | ok 05-HD Max | 35 degrees C | ok 06-Chipset | 43 degrees C | ok 07-P/S 1 | disabled | ns 08-P/S 2 | disabled | ns 09-VR P1 | 30 degrees C | ok 10-VR P1 Zone | 27 degrees C | ok 11-VR P1 Mem | 28 degrees C | ok 12-Storage Batt | 26 degrees C | ok 13-iLO Zone | 31 degrees C | ok 14-System Board | 35 degrees C | ok 15-System Board | 30 degrees C | ok 16-P/S Zone | 25 degrees C | ok 17-System Board | 32 degrees C | ok 18-System Board | 32 degrees C | ok 19-System Board | 31 degrees C | ok 20-PCI 1 | 65 degrees C | ok 21-PCI 2 | disabled | ns 22-PCI 3 | disabled | ns 23-PCI 1 Zone | 31 degrees C | ok 24-PCI 2 Zone | 28 degrees C | ok 25-PCI 3 Zone | disabled | ns 26-LOM card | disabled | ns 27-I/O Board | 28 degrees C | ok 28-LOM | disabled | ns Fan 1 | 41.16 percent | ok Fan 1 DutyCycle | 41.16 percent | ok Fan 1 Presence | 0x69 | ok Fan 2 | 41.16 percent | ok Fan 2 DutyCycle | 41.16 percent | ok Fan 2 Presence | 0x69 | ok Fan 3 | disabled | ns Fan 3 DutyCycle | disabled | ns Fan 3 Presence | 0x00 | ok Fan 4 | 27.83 percent | ok Fan 4 DutyCycle | 27.83 percent | ok Fan 4 Presence | 0x47 | ok Fan 5 | disabled | ns Fan 5 DutyCycle | disabled | ns Fan 5 Presence | 0x00 | ok Power Supply 1 | 0x00 | ok PS 1 Presence | 0x00 | ok Megacell Status | 0x00 | ok Memory Status | 0 error | ok C2 P1I Bay 1 | 0x01 | ok C2 P1I Bay 2 | 0x01 | ok :: [ 09:52:15 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:52:15 ] :: [ INFO ] :: Loop 6 Complete :: [ 09:52:15 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 09:52:15 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:52:15 ] :: [ BEGIN ] :: Running 'ipmitool sel list' SEL has no entries :: [ 09:52:15 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:52:15 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 09:52:15 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:52:15 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 09:52:15 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:52:15 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:52:15 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:52:15 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 34373737-3632-4d32-3235-34323050584a Timestamp : 10/05/1997 02:44:07 :: [ 09:52:15 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:52:16 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:52:16 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:52:16 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none :: [ 09:52:16 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:52:16 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 09:52:16 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:52:16 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 09:52:16 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:52:16 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Error response 0xc1 from Get PICMG Properities Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : UID (0x1) Entity ID : 23.1 Sensor Type (Discrete): Unknown Sensor ID : Sys Health LED (0x2) Entity ID : 23.2 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : 01-Inlet Ambient (0x3) Entity ID : 64.1 Sensor Type (Threshold) : Temperature Sensor Reading : 24 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 42.000 Upper Non-Recoverable : 46.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 02-CPU (0x4) Entity ID : 65.1 Sensor Type (Threshold) : Temperature Sensor Reading : 40 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 70.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 03-P1 DIMM 1-4 (0x5) Entity ID : 32.1 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 04-P1 DIMM 5-8 (0x6) Entity ID : 32.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 05-HD Max (0x7) Entity ID : 4.1 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 06-Chipset (0x8) Entity ID : 66.1 Sensor Type (Threshold) : Temperature Sensor Reading : 43 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 105.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 07-P/S 1 (0x9) Entity ID : 10.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 08-P/S 2 (0xa) Entity ID : 10.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 09-VR P1 (0xb) Entity ID : 19.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 10-VR P1 Zone (0xc) Entity ID : 19.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 11-VR P1 Mem (0xd) Entity ID : 19.3 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 12-Storage Batt (0xe) Entity ID : 40.1 Sensor Type (Threshold) : Temperature Sensor Reading : 26 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 13-iLO Zone (0xf) Entity ID : 6.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 80.000 Upper Non-Recoverable : 85.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 14-System Board (0x10) Entity ID : 66.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 15-System Board (0x11) Entity ID : 66.3 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 16-P/S Zone (0x12) Entity ID : 66.4 Sensor Type (Threshold) : Temperature Sensor Reading : 25 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : 127.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 17-System Board (0x13) Entity ID : 66.5 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 18-System Board (0x14) Entity ID : 66.6 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 19-System Board (0x15) Entity ID : 66.7 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 20-PCI 1 (0x16) Entity ID : 11.1 Sensor Type (Threshold) : Temperature Sensor Reading : 65 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 21-PCI 2 (0x17) Entity ID : 11.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 22-PCI 3 (0x18) Entity ID : 11.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 23-PCI 1 Zone (0x19) Entity ID : 16.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 24-PCI 2 Zone (0x1a) Entity ID : 16.2 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 25-PCI 3 Zone (0x1b) Entity ID : 16.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 26-LOM card (0x1c) Entity ID : 11.4 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 27-I/O Board (0x1d) Entity ID : 16.4 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 28-LOM (0x1e) Entity ID : 66.8 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : Fan 1 (0x1f) Entity ID : 29.1 Sensor Type (Discrete): Fan Sensor Reading : 41.160 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 1 DutyCycle (0x20) Entity ID : 29.1 Sensor Type (Threshold) : Fan Sensor Reading : 41.160 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 1 Presence (0x21) Entity ID : 29.1 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 2 (0x22) Entity ID : 29.2 Sensor Type (Discrete): Fan Sensor Reading : 41.160 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 2 DutyCycle (0x23) Entity ID : 29.2 Sensor Type (Threshold) : Fan Sensor Reading : 41.160 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 2 Presence (0x24) Entity ID : 29.2 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 3 (0x25) Entity ID : 29.3 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 3 DutyCycle (0x26) Entity ID : 29.3 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 3 Presence (0x27) Entity ID : 29.3 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Fan 4 (0x28) Entity ID : 29.4 Sensor Type (Discrete): Fan Sensor Reading : 27.832 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 4 DutyCycle (0x29) Entity ID : 29.4 Sensor Type (Threshold) : Fan Sensor Reading : 27.832 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 4 Presence (0x2a) Entity ID : 29.4 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 5 (0x2b) Entity ID : 29.5 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 5 DutyCycle (0x2c) Entity ID : 29.5 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 5 Presence (0x2d) Entity ID : 29.5 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Power Supply 1 (0x2e) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : PS 1 Presence (0x2f) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Device Present] Sensor ID : Megacell Status (0x30) Entity ID : 40.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : Memory Status (0x31) Entity ID : 7.1 Sensor Type (Discrete): Memory Sensor Reading : 0 error States Asserted : Memory [Presence Detected] Sensor ID : C2 P1I Bay 1 (0x32) Entity ID : 4.5 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : C2 P1I Bay 2 (0x33) Entity ID : 4.6 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] :: [ 09:52:18 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:52:18 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 19 Device Revision : 2 Firmware Revision : 2.75 IPMI Version : 2.0 Manufacturer ID : 11 Manufacturer Name : Hewlett-Packard Product ID : 8192 (0x2000) Product Name : Unknown (0x2000) Device Available : yes Provides Device SDRs : no Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device Chassis Device :: [ 09:52:18 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:52:18 ] :: [ BEGIN ] :: Running 'ipmitool sdr' UID | 0x00 | ok Sys Health LED | no reading | ns 01-Inlet Ambient | 24 degrees C | ok 02-CPU | 40 degrees C | ok 03-P1 DIMM 1-4 | 27 degrees C | ok 04-P1 DIMM 5-8 | 27 degrees C | ok 05-HD Max | 35 degrees C | ok 06-Chipset | 43 degrees C | ok 07-P/S 1 | disabled | ns 08-P/S 2 | disabled | ns 09-VR P1 | 30 degrees C | ok 10-VR P1 Zone | 27 degrees C | ok 11-VR P1 Mem | 28 degrees C | ok 12-Storage Batt | 26 degrees C | ok 13-iLO Zone | 31 degrees C | ok 14-System Board | 35 degrees C | ok 15-System Board | 30 degrees C | ok 16-P/S Zone | 25 degrees C | ok 17-System Board | 32 degrees C | ok 18-System Board | 32 degrees C | ok 19-System Board | 31 degrees C | ok 20-PCI 1 | 65 degrees C | ok 21-PCI 2 | disabled | ns 22-PCI 3 | disabled | ns 23-PCI 1 Zone | 31 degrees C | ok 24-PCI 2 Zone | 28 degrees C | ok 25-PCI 3 Zone | disabled | ns 26-LOM card | disabled | ns 27-I/O Board | 28 degrees C | ok 28-LOM | disabled | ns Fan 1 | 41.16 percent | ok Fan 1 DutyCycle | 41.16 percent | ok Fan 1 Presence | 0x69 | ok Fan 2 | 41.16 percent | ok Fan 2 DutyCycle | 41.16 percent | ok Fan 2 Presence | 0x69 | ok Fan 3 | disabled | ns Fan 3 DutyCycle | disabled | ns Fan 3 Presence | 0x00 | ok Fan 4 | 27.83 percent | ok Fan 4 DutyCycle | 27.83 percent | ok Fan 4 Presence | 0x47 | ok Fan 5 | disabled | ns Fan 5 DutyCycle | disabled | ns Fan 5 Presence | 0x00 | ok Power Supply 1 | 0x00 | ok PS 1 Presence | 0x00 | ok Megacell Status | 0x00 | ok Memory Status | 0 error | ok C2 P1I Bay 1 | 0x01 | ok C2 P1I Bay 2 | 0x01 | ok :: [ 09:52:20 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:52:21 ] :: [ INFO ] :: Loop 7 Complete :: [ 09:52:21 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 09:52:21 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:52:21 ] :: [ BEGIN ] :: Running 'ipmitool sel list' SEL has no entries :: [ 09:52:21 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:52:21 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 09:52:21 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:52:21 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 09:52:21 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:52:21 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:52:21 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:52:21 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 34373737-3632-4d32-3235-34323050584a Timestamp : 10/05/1997 02:44:07 :: [ 09:52:21 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:52:21 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:52:21 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:52:21 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none :: [ 09:52:21 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:52:21 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 09:52:21 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:52:21 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 09:52:21 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:52:21 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Error response 0xc1 from Get PICMG Properities Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : UID (0x1) Entity ID : 23.1 Sensor Type (Discrete): Unknown Sensor ID : Sys Health LED (0x2) Entity ID : 23.2 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : 01-Inlet Ambient (0x3) Entity ID : 64.1 Sensor Type (Threshold) : Temperature Sensor Reading : 24 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 42.000 Upper Non-Recoverable : 46.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 02-CPU (0x4) Entity ID : 65.1 Sensor Type (Threshold) : Temperature Sensor Reading : 40 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 70.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 03-P1 DIMM 1-4 (0x5) Entity ID : 32.1 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 04-P1 DIMM 5-8 (0x6) Entity ID : 32.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 05-HD Max (0x7) Entity ID : 4.1 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 06-Chipset (0x8) Entity ID : 66.1 Sensor Type (Threshold) : Temperature Sensor Reading : 43 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 105.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 07-P/S 1 (0x9) Entity ID : 10.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 08-P/S 2 (0xa) Entity ID : 10.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 09-VR P1 (0xb) Entity ID : 19.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 10-VR P1 Zone (0xc) Entity ID : 19.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 11-VR P1 Mem (0xd) Entity ID : 19.3 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 12-Storage Batt (0xe) Entity ID : 40.1 Sensor Type (Threshold) : Temperature Sensor Reading : 26 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 13-iLO Zone (0xf) Entity ID : 6.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 80.000 Upper Non-Recoverable : 85.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 14-System Board (0x10) Entity ID : 66.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 15-System Board (0x11) Entity ID : 66.3 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 16-P/S Zone (0x12) Entity ID : 66.4 Sensor Type (Threshold) : Temperature Sensor Reading : 25 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : 127.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 17-System Board (0x13) Entity ID : 66.5 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 18-System Board (0x14) Entity ID : 66.6 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 19-System Board (0x15) Entity ID : 66.7 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 20-PCI 1 (0x16) Entity ID : 11.1 Sensor Type (Threshold) : Temperature Sensor Reading : 65 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 21-PCI 2 (0x17) Entity ID : 11.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 22-PCI 3 (0x18) Entity ID : 11.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 23-PCI 1 Zone (0x19) Entity ID : 16.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 24-PCI 2 Zone (0x1a) Entity ID : 16.2 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 25-PCI 3 Zone (0x1b) Entity ID : 16.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 26-LOM card (0x1c) Entity ID : 11.4 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 27-I/O Board (0x1d) Entity ID : 16.4 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 28-LOM (0x1e) Entity ID : 66.8 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : Fan 1 (0x1f) Entity ID : 29.1 Sensor Type (Discrete): Fan Sensor Reading : 41.160 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 1 DutyCycle (0x20) Entity ID : 29.1 Sensor Type (Threshold) : Fan Sensor Reading : 41.160 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 1 Presence (0x21) Entity ID : 29.1 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 2 (0x22) Entity ID : 29.2 Sensor Type (Discrete): Fan Sensor Reading : 41.160 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 2 DutyCycle (0x23) Entity ID : 29.2 Sensor Type (Threshold) : Fan Sensor Reading : 41.160 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 2 Presence (0x24) Entity ID : 29.2 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 3 (0x25) Entity ID : 29.3 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 3 DutyCycle (0x26) Entity ID : 29.3 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 3 Presence (0x27) Entity ID : 29.3 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Fan 4 (0x28) Entity ID : 29.4 Sensor Type (Discrete): Fan Sensor Reading : 27.832 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 4 DutyCycle (0x29) Entity ID : 29.4 Sensor Type (Threshold) : Fan Sensor Reading : 27.832 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 4 Presence (0x2a) Entity ID : 29.4 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 5 (0x2b) Entity ID : 29.5 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 5 DutyCycle (0x2c) Entity ID : 29.5 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 5 Presence (0x2d) Entity ID : 29.5 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Power Supply 1 (0x2e) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : PS 1 Presence (0x2f) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Device Present] Sensor ID : Megacell Status (0x30) Entity ID : 40.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : Memory Status (0x31) Entity ID : 7.1 Sensor Type (Discrete): Memory Sensor Reading : 0 error States Asserted : Memory [Presence Detected] Sensor ID : C2 P1I Bay 1 (0x32) Entity ID : 4.5 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : C2 P1I Bay 2 (0x33) Entity ID : 4.6 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] :: [ 09:52:24 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:52:24 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 19 Device Revision : 2 Firmware Revision : 2.75 IPMI Version : 2.0 Manufacturer ID : 11 Manufacturer Name : Hewlett-Packard Product ID : 8192 (0x2000) Product Name : Unknown (0x2000) Device Available : yes Provides Device SDRs : no Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device Chassis Device :: [ 09:52:24 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:52:24 ] :: [ BEGIN ] :: Running 'ipmitool sdr' UID | 0x00 | ok Sys Health LED | no reading | ns 01-Inlet Ambient | 24 degrees C | ok 02-CPU | 40 degrees C | ok 03-P1 DIMM 1-4 | 27 degrees C | ok 04-P1 DIMM 5-8 | 27 degrees C | ok 05-HD Max | 35 degrees C | ok 06-Chipset | 43 degrees C | ok 07-P/S 1 | disabled | ns 08-P/S 2 | disabled | ns 09-VR P1 | 30 degrees C | ok 10-VR P1 Zone | 27 degrees C | ok 11-VR P1 Mem | 28 degrees C | ok 12-Storage Batt | 26 degrees C | ok 13-iLO Zone | 31 degrees C | ok 14-System Board | 35 degrees C | ok 15-System Board | 30 degrees C | ok 16-P/S Zone | 25 degrees C | ok 17-System Board | 32 degrees C | ok 18-System Board | 32 degrees C | ok 19-System Board | 31 degrees C | ok 20-PCI 1 | 65 degrees C | ok 21-PCI 2 | disabled | ns 22-PCI 3 | disabled | ns 23-PCI 1 Zone | 31 degrees C | ok 24-PCI 2 Zone | 28 degrees C | ok 25-PCI 3 Zone | disabled | ns 26-LOM card | disabled | ns 27-I/O Board | 28 degrees C | ok 28-LOM | disabled | ns Fan 1 | 41.16 percent | ok Fan 1 DutyCycle | 41.16 percent | ok Fan 1 Presence | 0x69 | ok Fan 2 | 41.16 percent | ok Fan 2 DutyCycle | 41.16 percent | ok Fan 2 Presence | 0x69 | ok Fan 3 | disabled | ns Fan 3 DutyCycle | disabled | ns Fan 3 Presence | 0x00 | ok Fan 4 | 27.83 percent | ok Fan 4 DutyCycle | 27.83 percent | ok Fan 4 Presence | 0x47 | ok Fan 5 | disabled | ns Fan 5 DutyCycle | disabled | ns Fan 5 Presence | 0x00 | ok Power Supply 1 | 0x00 | ok PS 1 Presence | 0x00 | ok Megacell Status | 0x00 | ok Memory Status | 0 error | ok C2 P1I Bay 1 | 0x01 | ok C2 P1I Bay 2 | 0x01 | ok :: [ 09:52:26 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:52:26 ] :: [ INFO ] :: Loop 8 Complete :: [ 09:52:26 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 09:52:26 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:52:26 ] :: [ BEGIN ] :: Running 'ipmitool sel list' SEL has no entries :: [ 09:52:26 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:52:26 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 09:52:26 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:52:26 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 09:52:26 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:52:26 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:52:26 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:52:26 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 34373737-3632-4d32-3235-34323050584a Timestamp : 10/05/1997 02:44:07 :: [ 09:52:26 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:52:26 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:52:26 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:52:26 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none :: [ 09:52:26 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:52:26 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 09:52:27 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:52:27 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 09:52:27 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:52:27 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Error response 0xc1 from Get PICMG Properities Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : UID (0x1) Entity ID : 23.1 Sensor Type (Discrete): Unknown Sensor ID : Sys Health LED (0x2) Entity ID : 23.2 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : 01-Inlet Ambient (0x3) Entity ID : 64.1 Sensor Type (Threshold) : Temperature Sensor Reading : 24 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 42.000 Upper Non-Recoverable : 46.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 02-CPU (0x4) Entity ID : 65.1 Sensor Type (Threshold) : Temperature Sensor Reading : 40 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 70.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 03-P1 DIMM 1-4 (0x5) Entity ID : 32.1 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 04-P1 DIMM 5-8 (0x6) Entity ID : 32.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 05-HD Max (0x7) Entity ID : 4.1 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 06-Chipset (0x8) Entity ID : 66.1 Sensor Type (Threshold) : Temperature Sensor Reading : 43 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 105.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 07-P/S 1 (0x9) Entity ID : 10.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 08-P/S 2 (0xa) Entity ID : 10.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 09-VR P1 (0xb) Entity ID : 19.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 10-VR P1 Zone (0xc) Entity ID : 19.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 11-VR P1 Mem (0xd) Entity ID : 19.3 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 12-Storage Batt (0xe) Entity ID : 40.1 Sensor Type (Threshold) : Temperature Sensor Reading : 26 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 13-iLO Zone (0xf) Entity ID : 6.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 80.000 Upper Non-Recoverable : 85.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 14-System Board (0x10) Entity ID : 66.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 15-System Board (0x11) Entity ID : 66.3 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 16-P/S Zone (0x12) Entity ID : 66.4 Sensor Type (Threshold) : Temperature Sensor Reading : 25 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : 127.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 17-System Board (0x13) Entity ID : 66.5 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 18-System Board (0x14) Entity ID : 66.6 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 19-System Board (0x15) Entity ID : 66.7 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 20-PCI 1 (0x16) Entity ID : 11.1 Sensor Type (Threshold) : Temperature Sensor Reading : 65 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 21-PCI 2 (0x17) Entity ID : 11.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 22-PCI 3 (0x18) Entity ID : 11.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 23-PCI 1 Zone (0x19) Entity ID : 16.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 24-PCI 2 Zone (0x1a) Entity ID : 16.2 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 25-PCI 3 Zone (0x1b) Entity ID : 16.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 26-LOM card (0x1c) Entity ID : 11.4 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 27-I/O Board (0x1d) Entity ID : 16.4 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 28-LOM (0x1e) Entity ID : 66.8 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : Fan 1 (0x1f) Entity ID : 29.1 Sensor Type (Discrete): Fan Sensor Reading : 40.768 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 1 DutyCycle (0x20) Entity ID : 29.1 Sensor Type (Threshold) : Fan Sensor Reading : 40.768 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 1 Presence (0x21) Entity ID : 29.1 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 2 (0x22) Entity ID : 29.2 Sensor Type (Discrete): Fan Sensor Reading : 40.768 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 2 DutyCycle (0x23) Entity ID : 29.2 Sensor Type (Threshold) : Fan Sensor Reading : 40.768 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 2 Presence (0x24) Entity ID : 29.2 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 3 (0x25) Entity ID : 29.3 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 3 DutyCycle (0x26) Entity ID : 29.3 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 3 Presence (0x27) Entity ID : 29.3 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Fan 4 (0x28) Entity ID : 29.4 Sensor Type (Discrete): Fan Sensor Reading : 27.832 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 4 DutyCycle (0x29) Entity ID : 29.4 Sensor Type (Threshold) : Fan Sensor Reading : 27.832 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 4 Presence (0x2a) Entity ID : 29.4 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 5 (0x2b) Entity ID : 29.5 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 5 DutyCycle (0x2c) Entity ID : 29.5 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 5 Presence (0x2d) Entity ID : 29.5 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Power Supply 1 (0x2e) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : PS 1 Presence (0x2f) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Device Present] Sensor ID : Megacell Status (0x30) Entity ID : 40.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : Memory Status (0x31) Entity ID : 7.1 Sensor Type (Discrete): Memory Sensor Reading : 0 error States Asserted : Memory [Presence Detected] Sensor ID : C2 P1I Bay 1 (0x32) Entity ID : 4.5 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : C2 P1I Bay 2 (0x33) Entity ID : 4.6 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] :: [ 09:52:29 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:52:29 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 19 Device Revision : 2 Firmware Revision : 2.75 IPMI Version : 2.0 Manufacturer ID : 11 Manufacturer Name : Hewlett-Packard Product ID : 8192 (0x2000) Product Name : Unknown (0x2000) Device Available : yes Provides Device SDRs : no Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device Chassis Device :: [ 09:52:29 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:52:29 ] :: [ BEGIN ] :: Running 'ipmitool sdr' UID | 0x00 | ok Sys Health LED | no reading | ns 01-Inlet Ambient | 24 degrees C | ok 02-CPU | 40 degrees C | ok 03-P1 DIMM 1-4 | 27 degrees C | ok 04-P1 DIMM 5-8 | 27 degrees C | ok 05-HD Max | 35 degrees C | ok 06-Chipset | 43 degrees C | ok 07-P/S 1 | disabled | ns 08-P/S 2 | disabled | ns 09-VR P1 | 30 degrees C | ok 10-VR P1 Zone | 27 degrees C | ok 11-VR P1 Mem | 28 degrees C | ok 12-Storage Batt | 26 degrees C | ok 13-iLO Zone | 31 degrees C | ok 14-System Board | 35 degrees C | ok 15-System Board | 30 degrees C | ok 16-P/S Zone | 25 degrees C | ok 17-System Board | 32 degrees C | ok 18-System Board | 32 degrees C | ok 19-System Board | 32 degrees C | ok 20-PCI 1 | 65 degrees C | ok 21-PCI 2 | disabled | ns 22-PCI 3 | disabled | ns 23-PCI 1 Zone | 31 degrees C | ok 24-PCI 2 Zone | 28 degrees C | ok 25-PCI 3 Zone | disabled | ns 26-LOM card | disabled | ns 27-I/O Board | 28 degrees C | ok 28-LOM | disabled | ns Fan 1 | 40.77 percent | ok Fan 1 DutyCycle | 40.77 percent | ok Fan 1 Presence | 0x68 | ok Fan 2 | 40.77 percent | ok Fan 2 DutyCycle | 40.77 percent | ok Fan 2 Presence | 0x68 | ok Fan 3 | disabled | ns Fan 3 DutyCycle | disabled | ns Fan 3 Presence | 0x00 | ok Fan 4 | 27.83 percent | ok Fan 4 DutyCycle | 27.83 percent | ok Fan 4 Presence | 0x47 | ok Fan 5 | disabled | ns Fan 5 DutyCycle | disabled | ns Fan 5 Presence | 0x00 | ok Power Supply 1 | 0x00 | ok PS 1 Presence | 0x00 | ok Megacell Status | 0x00 | ok Memory Status | 0 error | ok C2 P1I Bay 1 | 0x01 | ok C2 P1I Bay 2 | 0x01 | ok :: [ 09:52:31 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:52:31 ] :: [ INFO ] :: Loop 9 Complete :: [ 09:52:31 ] :: [ BEGIN ] :: Running 'ipmitool sel clear' Clearing SEL. Please allow a few seconds to erase. :: [ 09:52:31 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:52:31 ] :: [ BEGIN ] :: Running 'ipmitool sel list' SEL has no entries :: [ 09:52:31 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:52:31 ] :: [ BEGIN ] :: Running 'ipmitool chassis selftest' Self Test Results : passed :: [ 09:52:31 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:52:31 ] :: [ BEGIN ] :: Running 'ipmitool mc selftest' Selftest: passed :: [ 09:52:32 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:52:32 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:52:32 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:52:32 ] :: [ BEGIN ] :: Running 'ipmitool mc guid' System GUID : 34373737-3632-4d32-3235-34323050584a Timestamp : 10/05/1997 02:44:07 :: [ 09:52:32 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:52:32 ] :: [ BEGIN ] :: Running 'ipmitool mc getenables system_event_log' Receive Message Queue Interrupt : enabled Event Message Buffer Full Interrupt : disabled Event Message Buffer : disabled System Event Logging : enabled OEM 0 : disabled OEM 1 : disabled OEM 2 : disabled :: [ 09:52:32 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:52:32 ] :: [ BEGIN ] :: Running 'ipmitool chassis status' System Power : on Power Overload : false Power Interlock : inactive Main Power Fault : false Power Control Fault : false Power Restore Policy : previous Last Power Event : Chassis Intrusion : inactive Front-Panel Lockout : inactive Drive Fault : false Cooling/Fan Fault : false Front Panel Control : none :: [ 09:52:32 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:52:32 ] :: [ BEGIN ] :: Running 'ipmitool chassis bootparam' bootparam get bootparam set bootflag [options=...] Legal devices are: none : No override force_pxe : Force PXE boot force_disk : Force boot from default Hard-drive force_safe : Force boot from default Hard-drive, request Safe Mode force_diag : Force boot from Diagnostic Partition force_cdrom : Force boot from CD/DVD force_bios : Force boot into BIOS Setup Legal options are: help : print this message PEF : Clear valid bit on reset/power cycle cause by PEF timeout : Automatically clear boot flag valid bit on timeout watchdog: Clear valid bit on reset/power cycle cause by watchdog reset : Clear valid bit on push button reset/soft reset power : Clear valid bit on power up via power push button or wake event Any Option may be prepended with no- to invert sense of operation :: [ 09:52:32 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:52:32 ] :: [ BEGIN ] :: Running 'ipmitool chassis identify' Chassis identify interval: default (15 seconds) :: [ 09:52:32 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:52:32 ] :: [ BEGIN ] :: Running 'ipmitool sensor list -v' Running Get PICMG Properties my_addr 0x20, transit 0, target 0 Error response 0xc1 from Get PICMG Properities Running Get VSO Capabilities my_addr 0x20, transit 0, target 0 Invalid completion code received: Invalid command Discovered IPMB address 0x0 Sensor ID : UID (0x1) Entity ID : 23.1 Sensor Type (Discrete): Unknown Sensor ID : Sys Health LED (0x2) Entity ID : 23.2 Sensor Type (Discrete): Unknown Unable to read sensor: Device Not Present Sensor ID : 01-Inlet Ambient (0x3) Entity ID : 64.1 Sensor Type (Threshold) : Temperature Sensor Reading : 24 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 42.000 Upper Non-Recoverable : 46.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 02-CPU (0x4) Entity ID : 65.1 Sensor Type (Threshold) : Temperature Sensor Reading : 40 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 70.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 03-P1 DIMM 1-4 (0x5) Entity ID : 32.1 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 04-P1 DIMM 5-8 (0x6) Entity ID : 32.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 89.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 05-HD Max (0x7) Entity ID : 4.1 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 06-Chipset (0x8) Entity ID : 66.1 Sensor Type (Threshold) : Temperature Sensor Reading : 43 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 105.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 07-P/S 1 (0x9) Entity ID : 10.1 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 08-P/S 2 (0xa) Entity ID : 10.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : 09-VR P1 (0xb) Entity ID : 19.1 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 10-VR P1 Zone (0xc) Entity ID : 19.2 Sensor Type (Threshold) : Temperature Sensor Reading : 27 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 11-VR P1 Mem (0xd) Entity ID : 19.3 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 115.000 Upper Non-Recoverable : 120.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 12-Storage Batt (0xe) Entity ID : 40.1 Sensor Type (Threshold) : Temperature Sensor Reading : 26 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 60.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 13-iLO Zone (0xf) Entity ID : 6.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 80.000 Upper Non-Recoverable : 85.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 14-System Board (0x10) Entity ID : 66.2 Sensor Type (Threshold) : Temperature Sensor Reading : 35 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 15-System Board (0x11) Entity ID : 66.3 Sensor Type (Threshold) : Temperature Sensor Reading : 30 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : 105.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 16-P/S Zone (0x12) Entity ID : 66.4 Sensor Type (Threshold) : Temperature Sensor Reading : 25 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : 127.000 Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ unr+ Sensor ID : 17-System Board (0x13) Entity ID : 66.5 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 18-System Board (0x14) Entity ID : 66.6 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 19-System Board (0x15) Entity ID : 66.7 Sensor Type (Threshold) : Temperature Sensor Reading : 32 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 20-PCI 1 (0x16) Entity ID : 11.1 Sensor Type (Threshold) : Temperature Sensor Reading : 65 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 100.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 21-PCI 2 (0x17) Entity ID : 11.2 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 22-PCI 3 (0x18) Entity ID : 11.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 23-PCI 1 Zone (0x19) Entity ID : 16.1 Sensor Type (Threshold) : Temperature Sensor Reading : 31 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 24-PCI 2 Zone (0x1a) Entity ID : 16.2 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 25-PCI 3 Zone (0x1b) Entity ID : 16.3 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 26-LOM card (0x1c) Entity ID : 11.4 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : 27-I/O Board (0x1d) Entity ID : 16.4 Sensor Type (Threshold) : Temperature Sensor Reading : 28 (+/- 0) degrees C Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : 126.000 Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : ucr+ Sensor ID : 28-LOM (0x1e) Entity ID : 66.8 Sensor Type (Threshold) : Temperature Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : ucr+ Sensor ID : Fan 1 (0x1f) Entity ID : 29.1 Sensor Type (Discrete): Fan Sensor Reading : 40.768 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 1 DutyCycle (0x20) Entity ID : 29.1 Sensor Type (Threshold) : Fan Sensor Reading : 40.768 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 1 Presence (0x21) Entity ID : 29.1 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 2 (0x22) Entity ID : 29.2 Sensor Type (Discrete): Fan Sensor Reading : 40.768 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 2 DutyCycle (0x23) Entity ID : 29.2 Sensor Type (Threshold) : Fan Sensor Reading : 40.768 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 2 Presence (0x24) Entity ID : 29.2 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 3 (0x25) Entity ID : 29.3 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 3 DutyCycle (0x26) Entity ID : 29.3 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 3 Presence (0x27) Entity ID : 29.3 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Fan 4 (0x28) Entity ID : 29.4 Sensor Type (Discrete): Fan Sensor Reading : 27.832 percent States Asserted : Fan [Transition to Running] Sensor ID : Fan 4 DutyCycle (0x29) Entity ID : 29.4 Sensor Type (Threshold) : Fan Sensor Reading : 27.832 (+/- 0) percent Status : ok Lower Non-Recoverable : na Lower Critical : na Lower Non-Critical : na Upper Non-Critical : na Upper Critical : na Upper Non-Recoverable : na Positive Hysteresis : Unspecified Negative Hysteresis : Unspecified Assertions Enabled : Sensor ID : Fan 4 Presence (0x2a) Entity ID : 29.4 Sensor Type (Discrete): Fan States Asserted : Fan [Device Present] Sensor ID : Fan 5 (0x2b) Entity ID : 29.5 Sensor Type (Discrete): Fan Unable to read sensor: Device Not Present Sensor ID : Fan 5 DutyCycle (0x2c) Entity ID : 29.5 Sensor Type (Threshold) : Fan Sensor Reading : Unable to read sensor: Device Not Present Assertions Enabled : Sensor ID : Fan 5 Presence (0x2d) Entity ID : 29.5 Sensor Type (Discrete): Fan States Asserted : Fan [Device Absent] Sensor ID : Power Supply 1 (0x2e) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Presence detected] Sensor ID : PS 1 Presence (0x2f) Entity ID : 10.1 Sensor Type (Discrete): Power Supply States Asserted : Power Supply [Device Present] Sensor ID : Megacell Status (0x30) Entity ID : 40.1 Sensor Type (Discrete): Battery States Asserted : Battery [Presence Detected] Sensor ID : Memory Status (0x31) Entity ID : 7.1 Sensor Type (Discrete): Memory Sensor Reading : 0 error States Asserted : Memory [Presence Detected] Sensor ID : C2 P1I Bay 1 (0x32) Entity ID : 4.5 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] Sensor ID : C2 P1I Bay 2 (0x33) Entity ID : 4.6 Sensor Type (Discrete): Drive Slot / Bay States Asserted : Drive Slot / Bay [Drive Present] :: [ 09:52:34 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:52:34 ] :: [ BEGIN ] :: Running 'ipmitool mc info' Device ID : 19 Device Revision : 2 Firmware Revision : 2.75 IPMI Version : 2.0 Manufacturer ID : 11 Manufacturer Name : Hewlett-Packard Product ID : 8192 (0x2000) Product Name : Unknown (0x2000) Device Available : yes Provides Device SDRs : no Additional Device Support : Sensor Device SDR Repository Device SEL Device FRU Inventory Device Chassis Device :: [ 09:52:35 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:52:35 ] :: [ BEGIN ] :: Running 'ipmitool sdr' UID | 0x00 | ok Sys Health LED | no reading | ns 01-Inlet Ambient | 24 degrees C | ok 02-CPU | 40 degrees C | ok 03-P1 DIMM 1-4 | 27 degrees C | ok 04-P1 DIMM 5-8 | 27 degrees C | ok 05-HD Max | 35 degrees C | ok 06-Chipset | 43 degrees C | ok 07-P/S 1 | disabled | ns 08-P/S 2 | disabled | ns 09-VR P1 | 30 degrees C | ok 10-VR P1 Zone | 27 degrees C | ok 11-VR P1 Mem | 28 degrees C | ok 12-Storage Batt | 26 degrees C | ok 13-iLO Zone | 31 degrees C | ok 14-System Board | 35 degrees C | ok 15-System Board | 30 degrees C | ok 16-P/S Zone | 25 degrees C | ok 17-System Board | 32 degrees C | ok 18-System Board | 32 degrees C | ok 19-System Board | 32 degrees C | ok 20-PCI 1 | 65 degrees C | ok 21-PCI 2 | disabled | ns 22-PCI 3 | disabled | ns 23-PCI 1 Zone | 31 degrees C | ok 24-PCI 2 Zone | 28 degrees C | ok 25-PCI 3 Zone | disabled | ns 26-LOM card | disabled | ns 27-I/O Board | 28 degrees C | ok 28-LOM | disabled | ns Fan 1 | 40.77 percent | ok Fan 1 DutyCycle | 40.77 percent | ok Fan 1 Presence | 0x68 | ok Fan 2 | 40.77 percent | ok Fan 2 DutyCycle | 40.77 percent | ok Fan 2 Presence | 0x68 | ok Fan 3 | disabled | ns Fan 3 DutyCycle | disabled | ns Fan 3 Presence | 0x00 | ok Fan 4 | 27.83 percent | ok Fan 4 DutyCycle | 27.83 percent | ok Fan 4 Presence | 0x47 | ok Fan 5 | disabled | ns Fan 5 DutyCycle | disabled | ns Fan 5 Presence | 0x00 | ok Power Supply 1 | 0x00 | ok PS 1 Presence | 0x00 | ok Megacell Status | 0x00 | ok Memory Status | 0 error | ok C2 P1I Bay 1 | 0x01 | ok C2 P1I Bay 2 | 0x01 | ok :: [ 09:52:37 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:52:37 ] :: [ INFO ] :: Loop 10 Complete :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Duration: 60s :: Assertions: 143 good, 0 bad :: RESULT: PASS (Test) ** Test PASS Score:0 Uploading resultoutputfile.log .done :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Test :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: [ 09:52:37 ] :: [ BEGIN ] :: Running 'journalctl -b -p err | grep ipmi > /tmp/error.log' :: [ 09:52:37 ] :: [ PASS ] :: Command 'journalctl -b -p err | grep ipmi > /tmp/error.log' (Expected 0,1, got 1) :: [ 09:52:37 ] :: [ BEGIN ] :: Running 'cat /tmp/error.log' :: [ 09:52:37 ] :: [ PASS ] :: Command 'cat /tmp/error.log' (Expected 0, got 0) :: [ 09:52:37 ] :: [ PASS ] :: File '/tmp/error.log' should not contain 'error|fail|warn' :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Duration: 0s :: Assertions: 3 good, 0 bad :: RESULT: PASS (Test) ** Test PASS Score:0 Uploading resultoutputfile.log .done :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: /kernel/ipmi/stress/ipmitool-loop :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: [ 09:52:38 ] :: [ LOG ] :: Phases fingerprint: GpTeNtEf :: [ 09:52:38 ] :: [ LOG ] :: Asserts fingerprint: soqEEN4+ Uploading journal.xml .done :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Duration: 62s :: Phases: 3 good, 0 bad :: OVERALL RESULT: PASS (/kernel/ipmi/stress/ipmitool-loop) :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: TEST PROTOCOL :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: Test run ID : 7 Package : ipmi beakerlib RPM : beakerlib-1.29.2-1.fc38.noarch Test name : /kernel/ipmi/stress/ipmitool-loop Test started : 2022-09-28 09:51:36 EDT Test finished : 2022-09-28 09:52:38 EDT Test duration : 62 seconds Distro : Fedora release 38 (Rawhide) Hostname : hpe-dl120gen9-02.hpe2.lab.eng.bos.redhat.com Architecture : unknown CPUs : 16 x Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz RAM size : 15733 MB HDD size : 558.59 GB :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Test description :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: PURPOSE of /kernel/ipmi/stress/ipmitool-loop Description: IPMItool loop stress test Author: Rachel Sibley Execute various IPMItool commands in a loop, verify the ipmi driver does not get wedged after so many iterations. :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Setup :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: [ 09:51:36 ] :: [ LOG ] :: Output of 'dmidecode --type 38 > /tmp/dmidecode.log': :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 09:51:36 ] :: [ PASS ] :: Command 'dmidecode --type 38 > /tmp/dmidecode.log' (Expected 0, got 0) :: [ 09:51:36 ] :: [ PASS ] :: Moving on, host is ipmi compatible :: [ 09:51:36 ] :: [ PASS ] :: Command 'modprobe -r ipmi_ssif ipmi_devintf ipmi_poweroff ipmi_watchdog ipmi_si' (Expected 0,1, got 1) :: [ 09:51:36 ] :: [ LOG ] :: Output of 'modprobe ipmi_ssif': :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 09:51:36 ] :: [ PASS ] :: Command 'modprobe ipmi_ssif' (Expected 0,1, got 0) :: [ 09:51:36 ] :: [ LOG ] :: Output of 'modprobe ipmi_devintf': :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 09:51:36 ] :: [ PASS ] :: Command 'modprobe ipmi_devintf' (Expected 0,1, got 0) :: [ 09:51:36 ] :: [ LOG ] :: Output of 'modprobe ipmi_poweroff': :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 09:51:36 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 09:51:36 ] :: [ PASS ] :: Command 'modprobe ipmi_poweroff' (Expected 0,1, got 0) :: [ 09:51:37 ] :: [ LOG ] :: Output of 'modprobe ipmi_watchdog': :: [ 09:51:37 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 09:51:37 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 09:51:37 ] :: [ PASS ] :: Command 'modprobe ipmi_watchdog' (Expected 0,1, got 0) :: [ 09:51:37 ] :: [ LOG ] :: Output of 'modprobe ipmi_si': :: [ 09:51:37 ] :: [ LOG ] :: --------------- OUTPUT START --------------- :: [ 09:51:37 ] :: [ LOG ] :: --------------- OUTPUT END --------------- :: [ 09:51:37 ] :: [ PASS ] :: Command 'modprobe ipmi_si' (Expected 0,1, got 0) :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Duration: 1s :: Assertions: 8 good, 0 bad :: RESULT: PASS (Setup) :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: Test :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: :: [ 09:51:37 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:51:37 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:51:37 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:51:38 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:51:40 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:51:41 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ INFO ] :: Loop 0 Complete :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:51:43 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:51:46 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:51:46 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ INFO ] :: Loop 1 Complete :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:51:48 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:51:49 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:51:49 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:51:49 ] :: [ PASS ] :: Command 'ipmitool chassis bootparam' (Expected 0,1, got 0) :: [ 09:51:49 ] :: [ PASS ] :: Command 'ipmitool chassis identify' (Expected 0,1, got 0) :: [ 09:51:51 ] :: [ PASS ] :: Command 'ipmitool sensor list -v' (Expected 0,1, got 0) :: [ 09:51:51 ] :: [ PASS ] :: Command 'ipmitool mc info' (Expected 0,1, got 0) :: [ 09:51:53 ] :: [ PASS ] :: Command 'ipmitool sdr' (Expected 0,1, got 0) :: [ 09:51:53 ] :: [ INFO ] :: Loop 2 Complete :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool sel clear' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool sel list' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool chassis selftest' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool mc selftest' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool mc getenables' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool mc guid' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool mc getenables system_event_log' (Expected 0,1, got 0) :: [ 09:51:54 ] :: [ PASS ] :: Command 'ipmitool chassis status' (Expected 0,1, got 0) :: [ 09:51: