Embroidering the Pattern Repeatedly

By embroidering thread marks, you can easily align patterns when rehooping the fabric to embroider a series.

1. Touch [Edit], and then touch .

2. Touch .

3. Touch to select the thread mark to be sewn.

   
   • When there are two or more elements, use and or and to select a pattern that you want to assign a thread mark(s) to.

4. Touch [OK], then [Embroidery].

   

5. Press the “Start/Stop” button to begin embroidering.

   • When embroidering is finished, the thread mark is embroidered with the last thread color.
     

6. Remove the embroidery frame.

7. Rehoop the fabric in the embroidery frame.

   • Adjust the position of the fabric so that the embroidering area for the next pattern is within the embroidering area.
     
     1. Pattern embroidered first
     2. Position of pattern to be embroidered next
     3. Embroidering area

8. Attach the embroidery frame to the machine, and then touch .

   

9. Touch to set the starting point to the top center of the pattern.

   

10. Touch [OK].

11. Press (Presser foot lifter button) to lower the embroidery foot.

12. Touch .

13. Touch the positioning keys to move the embroidery frame until the thread mark on the fabric is aligned on the starting point in the camera view window.

    
    1. Thread mark on the fabric
    2. Starting point
       
       
       • If the pattern position cannot be aligned using the positioning keys, rehoop the fabric, and then try again to align the position with the positioning keys.
       • When embroidering the repeated pattern, do not rotate the pattern in the camera view window. If the pattern is rotated in the camera view window, you cannot embroider the pattern properly aligned even if the thread mark and the starting point are aligned in the camera view window.

14. Touch [OK] to return to the previous screen.

15. If necessary, remove the thread mark.

16. Press the “Start/Stop” button to begin embroidering.