Attaching Embroidery Foot “W”

CAUTION

• When attaching an embroidery foot, always touch on the screen. You may accidentally press the “Start/Stop” button and possibly cause injury.
• Be sure to use the embroidery foot “W” when doing embroidery. Otherwise, the needle may break and cause injury.
• Use the included multi-purpose screwdriver to firmly tighten the screw of the presser foot holder. If the screw is loose, the needle may strike the embroidery foot and break, possibly causing injury.

1. Touch . Remove the presser foot and presser foot holder. (Changing the Presser Foot)

2. Position the embroidery foot “W” on the presser foot bar by aligning the notch of the presser foot to the screw.

   Side view

   

3. Hold the embroidery foot in place with your right hand, and then use the included multi-purpose screwdriver to securely tighten the presser foot holder screw.

   
   1. Presser foot holder screw

4. Touch to unlock all keys and buttons.

   • All keys and operation buttons are unlocked, and the previous screen is displayed.