Checking the Needle Location in the Screen

You can check the stitch image with actual fabric image on the screen.

1. Select a stitch, and then touch .

   • An image of the selected stitch and the actual fabric image are displayed.
     
   1. Change the thread color displayed on the screen.

2. Touch on the fabric image or on the screen.

   • The camera view window appears.
     
   1. Touch this key to save a camera image to the USB media.
      Insert the USB media to the machine to save a camera image. (Right-side/Rear View)
   2. Touch this key to display a grid.
   3. Lower the presser foot, and then touch .
      The needle drop point appears in the screen as “”.

      When moving the fabric, raise the presser foot, and then lower it again afterwards.

   4. Touch this key to close the screen.
   5. Touch to enlarge the image in the screen. Touch again to return the image to its original display size.
      • Touch again to turn off the camera view.
      • The camera view window disappears when you start sewing.
      • The needle drop point indicated in the screen may differ from the actual position.
        In that case, performing the camera needle position setting procedure may resolve the problem. Refer to Needle Calibration for Camera/Projector.