Automatic Thread Cutting

The machine can be set to automatically cut the threads at the end of the stitching. If automatic thread cutting is set, automatic reverse/reinforcement stitching is also set.

1. Select a stitch pattern.

2. Touch to set the automatic thread cutting function.

   
   • The keys will display as , and the machine is set for automatic thread cutting function and automatic reverse/reinforcement stitching.
     • To turn off the automatic thread cutting function, touch again.

3. Set the needle in the start position, and press the “Start/Stop” button.

   • The machine will automatically sew reverse stitches (or reinforcement stitches) and then continue sewing.

4. Once you have reached the end of the stitching, press (Reverse stitch button) or (Reinforcement stitch button) once.

   If stitching, such as buttonholes and bar tacking, that includes reinforcement stitching has been selected, this operation is unnecessary.

   • After the reverse stitching (or reinforcement stitching) has been done, the machine stops, and the threads are cut.
     
   1. The point where the “Start/Stop” button was pressed.
   2. The point where (Reverse stitch button) or (Reinforcement stitch button) was pressed.
   3. The thread is cut here.