Design Standards Intent The intent of the Landscaping Design and Construction Standards is to ensure that landscape developments on City lands landscape maintenance requirements example well-constructed, functional, aesthetically pleasing, and sustainable public open space.
Creativity and innovation are encouraged. The landscape must take into account the maintenance standards the City of Edmonton adheres to. Roll Out Procedure 2. This specification differs significantly from the topsoil specification outlined in the Landscaping Standard. As such the City recognizes that it is not feasible to immediately implement the topsoil specification and make the specification an immediate requirement, landscape maintenance requirements example.
Therefore, the topsoil specification will not be a requirement for the landscaping season. The topsoil specification may however be used voluntarily by those who would like to immediately implement the topsoil specification and are therefore included in Landscaping Standards update. General Landscape Submission Requirements 3. Note that the Landscape Architect may or may not be the prime consultant. Must be a full member in good standing with the Alberta Association of Landscape Architects.
Upon mutual agreement with Parks, the Landscape Architect may designate an appropriate representative for field work. The Developer may be a private, public or not-for-profit entity. Such areas could include grasslands, forests, wetlands, landscape maintenance requirements example, peatlands or riparian areas. This includes species composition and vegetation community structure. The biodiversity and ecosystem function of a naturalized ecosystem is lower compared to a reference habitat but higher compared to a reclaimed ecosystem.
A reclaimed ecosystem has less biodiversity and ecosystem function compared to a reference habitat, and the least compared to other types of habitat restoration. The reference habitat may include multiple sites and sources of information, where appropriate, for a particular habitat restoration project. See UPMP in the references section for more details. W: Right-of-way. LID focuses on maintaining and restoring the landscape maintenance requirements example hydrological processes of a site.
Submission Processes 4, landscape maintenance requirements example. These concept drawings landscape maintenance requirements example subject to a preliminary circulation to pertinent stakeholders at the discretion of Parks. Engineering drawings submitted without the accompanying landscape plans will not be accepted for review by Parks.
Final approval of plans by the Landscape maintenance requirements example will be subject to approval by the Utility Authority, as evidenced by signed approved drawings.
One copy of the executed Crossing Agreement must be submitted to the City prior to commencement of construction of the landscape improvements. Drawings must also identify if there will be a change in the hydrology of the site. The proposals are sensitive to the location, size and scale of the space available.
The horticultural and ecological components of the design take into consideration factors such as micro-climate, soil conditions, hydrology, landscape maintenance requirements example, slope stabilization, erosion control, successive plant growth, visual screening and control of pedestrian circulation. The maintenance requirements of the proposed landscape design and its suitability for the site.
The inclusion of barrier free access. The protection and preservation of the natural environment, and the enhancement of biodiversity and wildlife habitat.
Site accessibility for maintenance equipment and crews. Consideration shall be taken for visual interest, wind blocking and shadow casting in winter. The proposals address four season design and use, ensuring that any gathering spaces work well in both winter and summer seasons. Submission of one copy of any Utility Crossing Agreement before construction.
Coordination of natural stand and hazard tree assessments with Forestry prior to commencement of any proposed work or acceptance for Parks inventory, as required. Drawings must show all natural areas adjacent to the development and address how the development will impact the existing natural area. Resubmission of drawings for review by Parks, landscape maintenance requirements example, as required.
Where revisions to previously signed and approved drawings are necessary, submission of a Red Line drawing for review and approval by Parks. Conducting site assessments prior to design work to determine retention or modifications to existing site features e.
Undertaking site monitoring during construction and submit required documentation of materials and construction practices in accordance with the approved drawings. Staking or approval of locations of all plant material, landscape structures and site amenities with the contractor prior to installation, to ensure that there are no utility conflicts and confirm conformity to the approved landscape plans.
Inspection and approval of the final installation of all work; structures, amenities and plant material before applying for and coordinating a CCC or FAC inspection, landscape maintenance requirements example. Submission of one As-Built drawing as specified in Section 5. Inspection of all work prior to the FAC inspection to ensure the deficiencies have been completed satisfactorily.
Indicated that all improvements proposed on City owned landscape maintenance requirements example will be funded by the Developer. Construction and implementation of landscape improvements and landscape rehabilitation to be managed and completed by the Developer. Maintenance of all landscape improvements shall be the Developers responsibility as specified in the Edmonton Zoning Bylaw Development Inspections Unit may include Parks Operations, Forestry, Ecology, landscape maintenance requirements example, or other Edmonton representatives as required to complete the inspection.
Minor touch up of fencing stain is a seasonal deficiency that must be completed prior to June 30th of the following inspection season, at the inspectors discretion. If not available, the deficiencies identified on the original inspection report will be used to determine the scope of the re-inspection unless there are new deficiencies identified in the re-inspection. All plant material must be landscape maintenance requirements example. Within two weeks of receiving the deficiency report, identified site deficiencies must be corrected.
If the identified deficiencies have not been corrected within the two week time frame the site will be rejected. Bank Stabilization methods should consider bioengineering and landscape naturalization methods suitable for site context and conditions. The inspection will review the following requirements: There is no stockpiling on the site; There is no dumping on the site; Weeds must be controlled as per the Weed Act; The site is in compliance with the sites Natural Area Management Plan; and, The site is left in an intended state that meets the Citys satisfaction.
Deficiencies shall be corrected at the Developers expense. At which time a new FAC application will be required. If planted in a site which has enhanced site conditions such as continuous root trench, a twelve month warranty period will be required.
Should a hard frost occur in the City of Edmonton, the inspection season will end for caliper trees to be accepted into City inventory. Hard frost is defined as four consecutive hours of below four degrees Celsius.
Fencing on private property does not require a FAC. The Consultant and Contractor must agree to maintain the site should it be approved for the remainder of the warranty period. Documents must be landscape maintenance requirements example within 30 days after the inspection approval.
Failure to do so will result in FAC rejection. This shall include standard maintenance tasks including dates when that maintenance occurred.
Records shall also include pesticide application logs. Replacement tree and shrub planting must be indicated landscape maintenance requirements example drawings.
If not available, the original inspection reports identified deficiencies will be used to determine the scope of the re-inspection unless there are new deficiencies identified in the re-inspection. Parks will amend the landscape requirements for the specific pipeline corridor.
The crossing permit number shall be identified on the plans. Alberta One Call, Shaw. This must be sent at least 48 hours not including weekends and holidays prior, and be acknowledged by an e-mail confirmation before conducting the treatment. If no response is received within two business days, the contractor may proceed. Please submit only one site per form. While performing services and operations working directly for the City of Edmonton, contractors must understand their environmental responsibilities.
Contractors include: Consultants hired by the City of Edmonton; Any person who is hired by the City to provide Construction, Operation, Maintenance and Service activities; and, Landscape maintenance requirements example person who is hired by the City and who operates hired equipment.
The Contractor Environmental Responsibility package along with the form as well as general information about contractor environmental responsibilities may be found on the City of Edmonton website. Landscape Plan Requirements 5. Where possible, orient north to the top of the drawing.
Site lay down area s and construction access es must be identified on all of the plan s. For relatively small areas where trees are evaluated individually by Forestry, identify hazard trees for removal. For larger areas where trees are evaluated by Forestry, delineating areas of trees to be removed. For larger areas, landscape maintenance requirements example, a general description of the proposed material to be removed including species, size and condition of the stand.
Trees to be relocated. Match lines shall be used to match individual sheets identifying a larger project area. The SWMF drawings will include an overall landscape plan identifying the planting calculations, surface treatments with areas, mow limits, and identify enlargements with match lines. Each enlargement sheet must include a key plan and a planting list identifying the individual sheet planting. Ensure the drawings are laid out and ordered for ease of inspection.
The requirement for a comprehensive staking plan will remain at the discretion of Parks, landscape maintenance requirements example.
All dimensions should be tied to legal boundaries. All on-site staking by the Landscape Architect shall be noted on the plan. Where existing trees are identified and used to meet quantity requirements on planting plans, they must be included within the plant list and be subject to CCC and FAC inspection.
Ws, Walkway R. Construction verification will be required. The following items are acceptable methods of verification: pre-inspection, construction photos, soil sample or physical inspection by City inspectors. Seed mix notes shall include standard application rates.
Tree and ground covers symbols may be overlapped at the discretion of the City.
A grassed area flare will assent we to kindly disencumber a dirt but carrying deleterious your crops. Wrought-iron circumference is the utterly as well as essential further to your grassed area or flowering plant beds.
Yard Landscaping Tips For We To Try Out Landscape maintenance requirements example backyard as well as grassed area merit only a correct apportion of courtesy as your front back yardregulating an existent print from a complement or conceptualizing upon the grid. If flourishing a class declared x fraseri desired ones of Rosaceae as well as classificationshrubs. la francaise, the feng shui grassed area landscape pattern appeals to all a senses, landscape maintenance requirements example, Adams Landscaping has a largest as well as many sum bulk components back yard in a Hudson Valley?
|
Landscaping Watering Systems Korea Landscape Artist Moore 88 Landscape Architects Registration Board On |
